Items where Subject is "Chemical Engineering > Biochemical Engineering"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | R | S | T | V | W | X | Y
Number of items at this level: 299.

A

A, Rakesh and V T S R, Kumar Reddy and Mangadody, Narasimha (2014) Air-core size measurement of operating hydrocyclone by electrical resistance tomography. Chemical Engineering and Technology, 37 (5). pp. 795-805. ISSN 0930-7516

A R, Premlata and Tripathi, M K and Sahu, Kirti Chandra (2015) Dynamics of rising bubble inside a viscosity-stratified medium. Physics of Fluids, 27 (072105). pp. 1-15. ISSN 1070-6631

Adaval, A (2014) PS-b-PMMA Block Copolymer Derived Electrospun Nanofibers: Synthesis, Characterization and Surface Properties Evaluation. Masters thesis, Indian Institute of Technology, Hyderabad.

Agrawal, M and Premlata, A R and Tripathi, M K and Karri, Badarinath and Sahu, Kirti Chandra (2017) Nonspherical liquid droplet falling in air. Physical Review B, 95 (3). 033111. ISSN 1098-0121

Agrawal, Meenu and Katiyar, Rajat Kumar and Karri, Badarinath and Sahu, Kirti Chandra (2020) Experimental investigation of a nonspherical water droplet falling in air. Physics of Fluids, 32 (11). p. 112105. ISSN 1070-6631

Anga, S and Bhattacharjee, J and Adimulam, H and Panda, Tarun K (2015) Synthesis, structure and reactivity study of magnesium amidinato complexes derived from carbodiimides and N,N′-bis(2,6-diisopropylphenyl)-1,4-diaza-butadiene ligands. Dalton Transactions, 44. pp. 955-965. ISSN 1477-9226

Annapurna, S M and Harikrishna, S S and Aravind, K B and Pawar, Parag D (2015) Targeting FtsZ as novel therapeutic strategy against multi-drug resistant staphylococcus aureus. Asian journal of microbiology, biotechnology & environmental sciences, 17 (1). pp. 131-138. ISSN 0972-3005

Appari, S and Janardhanan, V and Bauri, R and Jayanti, S and Deutschmann, O (2014) A detailed kinetic model for biogas steam reforming on Ni and catalyst deactivation due to sulfur poisoning. Applied Catalysis A: General, 471. pp. 118-125. ISSN 0926-860X

Appari, S and Janardhanan, V and Jayanti, S and Maier, L and Tischer, S and Deutschmann, O (2012) Micro-kinetic modeling of NH3 decomposition on Ni and its application to solid oxide fuel cells. Chemical Engineering Science, 66 (21). pp. 5184-5191. ISSN 0009-2509

Appari, S and Tanaka, R and Kudo, S and Hayashi, J -I and Janardhanan, V and Watanabe, H and Norinaga, K (2015) Predicting the temperature and reactant concentration profiles of reacting flow in the partial oxidation of hot coke oven gas using detailed chemistry and a one-dimensional flow model. Chemical Engineering Journal, 266. pp. 82-90. ISSN 1385-8947

Araga, R and Sharma, Chandra Shekhar (2017) One step direct synthesis of multiwalled carbon nanotubes from coconut shell derived charcoal. Materials Letters, 108. pp. 205-207. ISSN 0167-577X

Ashok, A and Doriya, K and Rao, D R M and Devarai, Santhosh Kumar (2017) Design of Solid State Bioreactor for Industrial Applications: An Overview to Conventional Bioreactors. Biocatalysis and Agricultural Biotechnology, 9. pp. 11-18. ISSN 1878-8181

Ayhan, I A and Meduri, Praveen and Oh, H and Bhimanapati, G R and Yang, G and Robinson, J A and Wang, Q (2016) Effect of Mn3O4 nanoparticle composition and distribution on graphene as a potential hybrid anode material for lithium-ion batteries. RSC Advances, 6 (39). pp. 33022-33030. ISSN 2046-2069

Azahar Ali, Md and Kamil Reza, K and Srivastava, S and Agrawal, V V and John, Renu and Malhotra, B D (2014) Lipid–Lipid Interactions in Aminated Reduced Graphene Oxide Interface for Biosensing Application. Langmuir, 30 (14). pp. 4192-4201. ISSN 0743-7463

B

B, Ramakrishna (2013) Simulation of Blood Flow through Stenosed Artery. Masters thesis, Indian Institute of Technology, Hyderabad.

Baek, Seungik and Mohan, Anand (2016) The treatment of pathologies, biotransport, and fluid–structure interaction problems in biomechanics. International Journal of Advances in Engineering Sciences and Applied Mathematics, 8 (1). p. 1. ISSN 0975-0770

Balusamy, Saravanan and Banerjee, Sayak and Sahu, Kirti Chandra (2021) Lifetime of sessile saliva droplets in the context of SARS-CoV-2. International Communications in Heat and Mass Transfer, 123. p. 105178. ISSN 0735-1933

Bandyopadhyay, P and Sharma, Abhay (2011) Development of a new semi analytical model for prediction of bubble point pressure of crude oils. Journal of Petroleum Science and Engineering, 78 (3-4). pp. 719-731. ISSN 0920-4105

Bhagat, K D and Tripathi, M K and Sahu, Kirti Chandra (2016) Instability due to double-diffusive phenomenon in pressure-driven displacement flow of one fluid by another in an axisymmetric pipe. European Journal of Mechanics - B/Fluids, 55 (Part I). pp. 63-70. ISSN 0997-7546

Bhagat, Kunal Dilip (2016) Instability in pressure-driven displacement flow of one fLuid by another in a pipe. Masters thesis, Indian Institute of Technology Hyderabad.

Bhalla, P (2014) Kinetics and Molecular Requirements of Klebsiella Pneumoniae-Induced Endovascular Infections under Hydrodynamic Shear as a Function of Platelet Activation. Masters thesis, Indian Institute of Technology, Hyderabad.

Bhutani, Utkarsh and Laha, A and Mitra, Kishalay and Majumdar, Saptarshi (2016) Sodium Alginate and Gelatin Hydrogels: Viscosity Effect on Hydrophobic Drug Release. Materials Letters, 164. pp. 76-79. ISSN 0167-577X

Bhutani, Utkarsh and Majumdar, Saptarshi (2015) Soya nuggets – a potential carrier: swelling kinetics and release of hydrophobic drugs. RSC Advances, 5. pp. 92184-92188. ISSN 2046-2069

C

Chandran, R P (2014) Prediction of Interfacial Property of Liquid Systems by Multiscale Modelling. Masters thesis, Indian Institute of Technology, Hyderabad.

Chatterjee, P (2014) Modelling and Optimization of Polymer Systems. Masters thesis, Indian Institute of Technology, Hyderabad.

Chel, Soumita and Gare, Suman and Giri, Lopamudra (2020) Detection of Specific Templates in Calcium Spiking in HeLa Cells Using Hierarchical DBSCAN: Clustering and Visualization of CellDrug Interaction at Multiple Doses*. In: Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS, 20 July 2020 - 24 July 2020.

D

D E, LaCroix and Mohan, Anand (2011) A model for the formation, growth, and dissolution of clots in vitro. Effect of the intrinsic pathway on antithrombin III deficiency and protein C deficiency. International Journal of Advances in Engineering Sciences and Applied Mathematics, 3 (1-4). pp. 93-105. ISSN 0975-0770

Detroja, Ketan P and Gudi, R D and Patwardhan, S C (2011) Data reduction and fault diagnosis using principle of distributional equivalence. In: International Symposium on Advanced Control of Industrial Processes, 23-26, May 2011, Hangzhou, Zhejiang; China.

Dhanala, V (2015) Steam Reforming and Oxidative Steam Reforming of Isobutanol Over Supported Metal Catalysts. PhD thesis, Indian Institute of Technology Hyderabad.

Dhanala, V and Maity, Sunil Kumar and Shee, Debaprasad (2015) Oxidative steam reforming of isobutanol over Ni/γ-Al2O3 catalysts: A comparison with thermodynamic equilibrium analysis. Journal of Industrial and Engineering Chemistry, 27. pp. 153-163. ISSN 1226-086X

Dhanala, V and Maity, Sunil Kumar and Shee, Debaprasad (2015) Roles of supports (γ-Al2O3, SiO2, ZrO2) and performance of metals (Ni, Co, Mo) in steam reforming of isobutanol. RSC Advances, 5. pp. 52522-52532. ISSN 2046-2069

Dhanala, V and Maity, Sunil Kumar and Shee, Debaprasad (2013) Steam reforming of isobutanol for the production of synthesis gas over Ni/g-Al2O3 catalysts. RSC Advances, 3. pp. 24521-24529. ISSN 2046-2069

Dhyani, Dhyani and Gare, Suman and Gupta, Rishikesh Kumar and Swain, Sarpras and Venkatesh, K.V. and Giri, Lopamudra (2020) GPCR mediated control of calcium dynamics: A systems perspective. Cellular Signalling, 74. p. 109717. ISSN 08986568

Dobhal, Nitesh (2016) Techno-economic Analysis for Production of Biodiesel from Microalgae using Aspen Plus. Masters thesis, Indian Institute of Technology Hyderabad.

Doriya, K and Devarai, Santhosh Kumar (2016) Isolation and screening of l-asparaginase free of glutaminase and urease from fungal sp. 3 Biotech, 6 (2). pp. 1-10. ISSN 2190-572X

Doriya, K and Jose, N and Gowda, M and Devarai, Santhosh Kumar (2016) Solid-State Fermentation vs Submerged Fermentation for the Production of l-Asparaginase. In: Advances in Food and Nutrition Research. Elsevier, pp. 115-135. ISBN 978-0-12-803847-5

Duarte, Belmiro P. M. and Singh, Satya P. and Moura, Maria J. (2022) Optimal design of multivariate acceptance sampling plans by variables. Journal of Statistical Computation and Simulation. pp. 1-21. ISSN 0094-9655

Durga Prakash, M and Vanjari, Siva Rama Krishna and Sharma, Chandra Shekhar and Singh, Shiv Govind (2016) Ultrasensitive, Label Free, Chemiresistive Nanobiosensor Using Multiwalled Carbon Nanotubes Embedded Electrospun SU-8 Nanofibers. Sensors, 16 (9). p. 1354. ISSN 1424-8220

E

Eda, S R and Devarai, Santhosh Kumar and Jinka, Rajeswari (2015) Pharmacological and Clinical Importance of Integrin Antagonists in Treatment of Cancer. Journal of Cell Science and Therapy, 6 (1). pp. 1-9. ISSN 2157-7013

F

Farokhi, Suhail (2016) Synthesis of Dimethyl Ether from Synthesis Gas over Bi-functional Catalyst. Masters thesis, Indian Institute of Technology Hyderabad.

G

Gaikwad, Mayur M. (2016) Optimization of chemical parameters to develop lead-free piezoelectric films for energy harvesting applications. Masters thesis, Indian Institute of Technology Hyderabad.

Gangele, A and Sharma, Chandra Shekhar and Pandey, Ashok Kumar (2017) Synthesis of Patterned Vertically Aligned Carbon Nanotubes by PECVD Using Different Growth Techniques : A Review. Journal of Nanoscience and Nanotechnology, 17. pp. 1-18. ISSN 1533-4880 (In Press)

Gaydhane, M K (2015) A 3-D Computational Model To Investigate The Influence of Quorum Sensing And Antibiotic Treatment On Growth Dynamics Of Poly Microbial Bio films. Masters thesis, Indian Institute of Technology Hyderabad.

Ghosh, S and R, Usha and Sahu, K C (2014) Double-diffusive two-fluid flow in a slippery channel: A linear stability analysis. Physics of Fluids, 26 (12). 127101-1-127101-23. ISSN 1070-6631

Ghosh, S and R, Usha and Sahu, Kirti Chandra (2015) Absolute and convective instabilities in double-diffusive two-fluid flow in a slippery channel. Chemical Engineering Science, 134. pp. 1-11. ISSN 0009-2509

Ghosh, S and Usha, R and Sahu, K C (2014) Linear stability analysis of miscible two-fluid flow in a channel with velocity slip at the walls. Physics of Fluids, 26 (014107). pp. 1-21. ISSN 1070-6631

Goel, H and Chandran, P R and Mitra, Kishalay and Majumdar, Saptarshi and Ray, P (2014) Estimation of interfacial tension for immiscible and partially miscible liquid systems by Dissipative Particle Dynamics. Chemical Physics Letters, 600. pp. 62-67. ISSN 0009-2614

Gopalakrishna, K M and Kakunuri, M and Sharma, Chandra Shekhar (2015) Effect of Disorder Induced by Ball Milling on the Electrochemical Performance of Catalytically Graphitized Carbon Xerogel as Anode for Lithium Ion Batteries. ECS Transactions, 66 (8). pp. 41-51. ISSN 1938-5862

Gopalakrishnan, L and Doriya, K and Devarai, Santhosh Kumar (2016) Moringa Oleifera: A Review on Nutritive Importance and its Medicinal Application. Food Science and Human Wellness. pp. 1-30. ISSN 2213-4530 (In Press)

Goutham, S and Devarai, Santhosh Kumar and Sadasivuni, K K and Cabibihan, J J and Rao, K V (2017) Nanostructure ZnFe2O4 with Bacillus subtilis for Detection of LPG at Low Temperature. Journal of Electronic Materials. ISSN 0361-5235

Goutham, S and Kaur, S and Sadasivuni, K K and Bal, J K and Jayarambabu, N and Devarai, Santhosh Kumar and Rao, K V (2017) Nanostructured ZnO gas sensors obtained by green method and combustion technique. Materials Science in Semiconductor Processing, 57. pp. 110-115. ISSN 1369-8001

Govindarajan, R and Sahu, K C (2014) Instabilities in viscosity-stratified flow. Annual Review of Fluid Mechanics, 46. pp. 331-353. ISSN 0066-4189

Gujjula, R and Mangadody, Narasimha (2015) Experimental investigation of hydrodynamics of gas-solid flow in an internally circulating fluidized bed. Canadian Journal of Chemical Engineering, 93 (8). pp. 1380-1391. ISSN 0008-4034

Gujjula, R and Mangadody, Narasimha (2015) Hydrodynamic Study of Gas-Solid Internally Circulating Fluidized Bed Using Multi-Phase CFD Model. Particulate Science and Technology. ISSN 0272-6351

Gujjula, R and Mangadody, Narasimha (2015) Hydrodynamic Study of Gas–Solid Internally Circulating Fluidized Bed Using Multiphase CFD Model. Particulate Science and Technology, 33 (6). pp. 593-609. ISSN 0272-6351

Gujjula, R and Mangadody, Narasimha (2014) Hydrodynamics Study of Gas-Solid Flow Pattern in an Internally Circulating Fluidized Bed with a Draft Tube. In: CFB-11: Proceedings of the 11th International Conference on Fluidized Bed Technology, 14-17, May 2014 , Beijing; China.

Gujjula, R and Mangadody, Narasimha (2015) Prediction of Solid Recirculation Rate and Solid Volume Fraction in an Internally Circulating Fluidized Bed. International Journal of Computational Methods, 12 (154000). pp. 1-24. ISSN 0219-8762

Gujjula, R and Mangadody, Narasimha (2013) Prediction of solid recirculation rate and solid volume fraction in an internally Circulating Fluidized bed (ICFB). In: APCOM & ISCM, 11-14, December 2013, Singapore. (Submitted)

Gujjula, R K (2014) Hydrodynamic study of gas-solid flow in an internally circulating fluidized bed (ICFB) using experimental and CFD techniques. PhD thesis, Indian Institute of Technology Hyderabad.

Gumte, Kapil and Pantula, Priyanka Devi and Miriyala, Srinivas Soumitri and Mitra, Kishalay (2021) Achieving wealth from bio-waste in a nationwide supply chain setup under uncertain environment through data driven robust optimization approach. Journal of Cleaner Production, 291. p. 125702. ISSN 0959-6526

Gupta, R K and Swain, S and Kankanamge, D and Priyanka, P D and Singh, R and Mitra, Kishalay and Karunarathne, A and Giri, Lopamudra (2017) Comparison of Calcium Dynamics and Specific Features for G Protein-Coupled Receptor-Targeting Drugs Using Live Cell Imaging and Automated Analysis. SLAS Discovery, 22 (7). pp. 848-858. ISSN 2472-5552

Gupta, Rishikesh Kumar (2015) A Framework for Classification of Heterogeneous Calcium Dynamics. Masters thesis, Indian Institute of Technology Hyderabad.

Gurrala, Pradeep and Balusamy, Saravanan and Banerjee, Sayak and Sahu, Kirti Chandra (2021) A Review on the Evaporation Dynamics of Sessile Drops of Binary Mixtures: Challenges and Opportunities. Fluid Dynamics & Materials Processing, 17 (2). pp. 253-284. ISSN 1555-2578

H

Hardjo, E F and Monder, D S and Karan, K (2014) An Effective Property Model for Infiltrated Electrodes in Solid Oxide Fuel Cells. Journal of The Electrochemical Society, 161 (1). F83-F93. ISSN 0013-4651

Haridas, A K and Sharma, C S and Rao, T N (2015) Donut-Shaped Li4Ti5O12 Structures as a High Performance Anode Material for Lithium Ion Batteries. Small, 11 (3). pp. 290-294. ISSN 1613-6810

Haridas, A K and Sharma, Chandra Shekhar and Hebalkar, N Y and Rao, T N (2017) Nano-grained SnO2/Li4Ti5O12 composite hollow fibers via sol-gel/ electrospinning as anode material for Li- ion batteries. Materials Today Energy, 4. pp. 14-24. ISSN 2468-6069

Haridas, A K and Sharma, Chandra Shekhar and Rao, T N (2016) Caterpillar-like sub-micron LiNi0.5Mn1.5O4 structures with site disorder and excess Mn3+ as high performance cathode material for lithium ion batteries. Electrochimica Acta, 212. pp. 500-509. ISSN 0013-4686

Haridas, A K and Sharma, Chandra Shekhar and Rao, T N (2014) Electrochemical performance of lithium titanate submicron rods synthesized by Sol-Gel/electrospinning. Electroanalysis, 26 (11). pp. 2315-2319. ISSN 1040-0397

Haridas, A K and Sharma, Chandra Shekhar and V, Sritharan and Rao, T N (2014) Fabrication and surface functionalization of electrospun polystyrene submicron fibers with controllable surface roughness. RSC Advances (4). pp. 12188-12197. ISSN 2046-2069

Haritha Yadav, K C and Ravi Kumar, J and Basha, S I and Deshmukh, G R and Gujjula, R and Santhamma, B (2012) Wound healing activity of topical application of Aloe vera gel in experimental animal models. International journal of pharma and bio sciences, 3 (2). P63-P72. ISSN 0975-6299

I

Ibrahim, Mohammed Adil (2023) Assessing biological network dynamics: comparing numerical simulations with analytical decomposition of parameter space. npj Systems Biology and Applications, 9 (1). p. 29. ISSN 2056-7189

J

Jampana, Phanindra Varma (2017) Coherence of randomly pre-conditioned matrices. In: Indian Control Conference, ICC, 4-6 January, 2017, Indian Institute of Technology (IIT) Guwahati Guwahati; India.

Jampana, Phanindra Varma and Detroja, Ketan P (2013) Continuous Time Identification in Laplace Domain. In: 10th IFAC Symposium on Dynamics and Control of Process Systems, DYCOPS 2013, 18-20, December 2013, Mumbai; India.

Jampana, Phanindra Varma and Shah, S L and Shaw, J (2014) A region growing method for detecting interfaces in X-ray view cell images. IEEE Sensors Journal, 14 (7). pp. 2283-2292. ISSN 1530-437X

Janardhanan, V (2015) Internal reforming of biogas in SOFC: a model based investigation. Journal of Solid State Electrochemistry, 19 (10). pp. 2981-2990. ISSN 1432-8488

Janardhanan, V (2015) Multi-scale Modeling of Biogas Fueled SOFC. ECS Transactions, 68 (1). pp. 3051-3058. ISSN 1938-5862

Janardhanan, V (2023) On the stability of Ni/γ-Al2O3 catalyst and the effect of H2O and O2 during biogas reforming. Applied Catalysis A: General, 651. p. 119033. ISSN 0926-860X

Janardhanan, V and Appari, S and Jayanti, S and Deutschmann, O (2011) Numerical study of on-board fuel reforming in a catalytic plate reactor for solid-oxide fuel cells. Chemical Engineering Science, 66 (3). pp. 490-498. ISSN 0009-2509

Janardhanan, V and Deutschmann, O (2011) Computational Fluid Dynamics of Catalytic Reactors. In: Modeling and Simulation of Heterogeneous Catalytic Reactions: From the Molecular Process to the Technical System. Wiley-VCH, pp. 251-282. ISBN 9783527321209

Janardhanan, V and Deutschmann, O (2011) Modeling diffusion limitation in solid-oxide fuel cells. Electrochimica Acta, 56 (27). pp. 9775-9782. ISSN 0013-4686

Janardhanan, V and Monder, D S (2014) Sulfur Poisoning of SOFCs: A Model Based Explanation of Polarization Dependent Extent of Poisoning. Journal of The Electrochemical Society, 161 (14). F1427-F1436. ISSN 0013-4651

Ji, L and Meduri, Praveen and Agubra, V and Xiao, X and Alcoutlabi, M (2016) Graphene-Based Nanocomposites for Energy Storage. Advanced Energy Materials, 6 (16). ISSN 1614-6832

Jose, Nimmy (2016) Isolation and Screening of Glutaminase & Urease Free Novel Fungal Strains for the Production of L-Asparaginase. Masters thesis, Indian Institute of Technology Hyderabad.

Jotkar, M R and Swaminathan, G and Sahu, Kirti Chandra and Govindarajan, R (2016) Global linear instability of flow through a converging-diverging channel. Journal of Fluids Engineering, 138 (3). 031301-1. ISSN 0098-2202

Joy, Nikhita (2016) A 3-D Computational Model to Investigate the Role of Small Colony Variants (SCVs) in the Antibiotic Susceptibility of a Polymicrobial Biofilm. Masters thesis, Indian Institute of Technology Hyderabad.

Jujjavarapu, S E (2016) Experiments, Modeling, and Media Optimization of Rhamnolipid and Lipopeptide Production. PhD thesis, Indian Institute of Technology Hyderabad.

Jujjavarapu, S E and Mohan, Anand and C, Venkateswarlu (2016) Optimum culture medium composition for lipopeptide production by Bacillus subtilis using response surface model-based ant colony optimization. Sadhana, 41 (1). pp. 55-65. ISSN 0256-2499

Jujjavarapu, S E and Mohan, Anand and Chimmiri, V (2013) Optimum culture medium composition for rhamnolipid production by pseudomonas aeruginosa AT10 using a novel multi-objective optimization method. Journal of Chemical Technology and Biotechnology, 88 (2). pp. 271-279. ISSN 0268-2575

K

K, Praveen Kumar (2014) Process Design and Economic Analysis of Bio-Butanol Process. Masters thesis, Indian Institute of Technology, Hyderabad.

K, Manohar (2015) Nanostructured Carbon Materials as High Capacity Anodes for Lithium Ion Battery. PhD thesis, Indian Institute of Technology Hyderabad.

K H, Anulekha (2015) Electrospun Nano structured Metal Oxides Based Electrode Materials for High Performance Lithium Ion Batteries. PhD thesis, Indian Institute of Technology Hyderabad.

Kakunuri, M and Kalia, S and Sharma, Chandra Shekhar (2016) Catalytic Graphitization of Resorcinol-Formaldehyde Xerogel and Its Effect on Lithium Ion Intercalation. Journal of Analytical and Applied Pyrolysis, 117. pp. 317-324. ISSN 0165-2370

Kakunuri, M and Kaushik, S and Saini, A and Sharma, Chandra Shekhar (2016) SU-8/MWCNT derived Electrospun Composite Carbon Nanofabric as a High Performance Anode Material for Lithium Ion Battery. ECS Transactions, 72 (1). pp. 69-74. ISSN 1938-6737

Kakunuri, M and Khandelwal, Mudrika and Sharma, Chandra Shekhar and Eichhorn, S J (2017) Fabrication of Bio-inspired Hydrophobic Self-Assembled Electrospun Nanofiber Based Hierarchical Structures. Materials Letters, 196. pp. 339-342. ISSN 0167-577X

Kakunuri, M and Sharma, Chandra Shekhar (2015) Candle Soot derived Fractal-like Carbon Nanoparticles Network as High-Rate Lithium Ion Battery Anode Material. Electrochimica Acta, 180. pp. 353-359. ISSN 0013-4686

Kakunuri, M and Sharma, Chandra Shekhar (2017) Effect of Current Collector and Pyrolysis Temperature on the Electrochemical Performance of Photoresist Derived Carbon Films. ECS Journal of Solid State Science and Technology, 6 (6). M3001-M3006. ISSN 2162-8769

Kakunuri, M and Sharma, Chandra Shekhar (2015) Effect of Pyrolysis Temperature on Electrochemical Performance of SU-8 Photoresist Derived Carbon Films. ECS Transactions, 66 (9). pp. 57-66. ISSN 1938-5862

Kakunuri, M and Sharma, Chandra Shekhar (2014) Photoresist Derived Carbon Films as High Capacity Anodes for Lithium Ion Battery. ECS Transactions, 61 (7). pp. 37-43. ISSN 1938-5862

Kakunuri, M and Vennamalla, S and Sharma, Chandra Shekhar (2015) Synthesis of carbon xerogel nanoparticles by inverse emulsion polymerization of resorcinol-formaldehyde and their use as anode materials for lithium-ion battery. RSC Advances, 5 (7). pp. 4747-4753. ISSN 2046-2069

Kakunuri, M and Wanasekara, N D and Sharma, Chandra Shekhar and Khandelwal, Mudrika and Eichhorn, S J (2017) Three-dimensional electrospun micropatterned cellulose acetate nanofiber surfaces with tunable wettability. Journal of Applied Polymer Science, 134 (15). p. 44709. ISSN 0021-8995

Kanne, H and Burte, N P and V, Prasanna and Gujjula, R (2015) Extraction and elemental analysis of Coleus forskohlii extract. Pharmacognosy Research, 7 (3). pp. 237-241. ISSN 0976-4836

Karapetsas, G and Sahu, K C and Matar, O K (2013) Effect of contact line dynamics on the thermocapillary motion of a droplet on an inclined plate. Langmuir, 29 (28). pp. 8892-8906. ISSN 0743-7463

Karapetsas, G and Sahu, K C and Sefiane, K and Matar, O K (2014) Thermocapillary-driven motion of a sessile drop: Effect of non-monotonic dependence of surface tension on temperature. Langmuir, 30 (15). pp. 4310-4321. ISSN 0743-7463

Karapetsas, G and Sahu, Kirti Chandra and Matar, O K (2015) Dynamics of surfactant-laden evaporating droplets. In: 68th Annual Meeting of the APS Division of Fluid Dynamics, 22–24 November, 2015, Boston, Massachusetts.

Karapetsas, G and Sahu, Kirti Chandra and Matar, O K (2016) Evaporation of sessile droplets laden with particles and insoluble surfactants. Langmuir, 32 (27). pp. 6871-6881. ISSN 0743-7463

Katepalli, H and Bikshapathi, M and Sharma, Chandra Shekhar and Verma, N and Sharma, A (2011) Synthesis of hierarchical fabrics by electrospinning of PAN nanofibers on activated carbon microfibers for environmental remediation applications. Chemical Engineering Journal, 171 (3). pp. 1194-1200. ISSN 1385-8947

Khandoji, C and M N, Satyanarayan and Shee, Debaprasad and N S, Sterin (2016) Synthesis And Characterization Of Graphene Oxide –Polyoxometalate Composite Material For Device Applications. In: 4th National Conference on Condensed Matter Physics and Applications, 23-24, May 2016, MIT Manipal, India.

Khandoji, C and N S, Sterin and Shee, Debaprasad and Mal, S S (2016) Polyoxometalates for Nonvolatile Memory Applications. In: National Symposium on Nano Science &Technology (NSNST-2016).

Killada, S (2014) Fabrication of Polymer Surfaces with Varying Roughness and Its Effect on Anti-Reflective Properties. Masters thesis, Indian Institute of Technology, Hyderabad.

Kohno, H and Liu, S and Ogura, T and Ishimoto, T and Monder, D S and Karan, K and Koyama, M (2013) Detailed Transport-Reaction Models for SOFC Ni-YSZ Patterned Anodes: A Critical Inquiry. In: ECS Transactions.

Konda, H and Tripathi, M K and Sahu, Kirti Chandra (2016) Bubble Motion in a Converging-Diverging Channel. Journal of Fluids Engineering, 138 (6). 064501-1. ISSN 0098-2202

Kulkarni, M M and Sharma, Chandra Shekhar and Sharma, A and Kalmodia, S and Basu, B (2012) Multiscale micro-patterned polymeric and carbon substrates derived from buckled photoresist films: Fabrication and cytocompatibility. Journal of Materials Science, 47 (8). pp. 3867-3875. ISSN 0022-2461

Kumar, Nitin (2014) Constitutive modeling of Poly Vinyl Alcohol-Sodium Borate gel. Masters thesis, Indian Institute of Technology, Hyderabad.

Kumar, P and Yenumala, S R and Maity, S K and Shee, D (2014) Kinetics of hydrodeoxygenation of stearic acid using supported nickel catalysts: Effects of supports. Applied Catalysis A: General, 471. pp. 28-38. ISSN 0926-860X

Kumar, Sanjay and Monder, Dayadeep (2013) A Fully Coupled Transport-Reaction Model for a Solid Oxide Fuel Cell. Masters thesis, Indian Institute of Technology, Hyderabad.

Kumar Reddy, V T S R and Janardhanan, V and Sahu, Kirti Chandra (2011) Effects of wall-heating on the linear instability characteristics of pressure-driven two-layer channel flow. Chemical Engineering Science, 66 (23). pp. 6272-6279. ISSN 0009-2509

Kunamalla, Alekhya (2016) Dehydration of Biomass-derived Carbohydrates in a Biphasic Reactor using Cation Exchange Resin Catalyst for the Production of Hydroxymethylfurfural and Furfural. Masters thesis, Indian Institute of Technology Hyderabad.

Kusuma, J N and Matar, O K and Sahu, K C (2014) Numerical simulations of miscible channel flow with chemical reactions. Current Science, 106 (6). pp. 841-852. ISSN 0011-3891

Kutla, Srikanth (2015) Data Based Modeling of Solid Oxide Fuel Cells. Masters thesis, Indian Institute of Technology Hyderabad.

L

L, Chandana and Reddy, P M K and Ch, Subrahmanyam (2015) Atmospheric pressure non-thermal plasma jet for the degradation of methylene blue in aqueous medium. Chemical Engineering Journal, 282. pp. 116-122. ISSN 1385-8947

Laha, A and Bhutani, U and Mitra, Kishalay and Majumdar, Saptarshi (2016) Fast and Slow Release: Synthesis of Gelatin Casted-Film Based Drug Delivery System. Materials and Manufacturing Processes, 31 (2). pp. 223-230. ISSN 1042-6914

Laha, A and Sharma, Chandra Shekhar and Majumdar, Saptarshi (2016) Electrospun gelatin nanofibers as drug carrier: effect of crosslinking on sustained release. Materials Today: Proceedings, 3 (10). pp. 3484-3491. ISSN 2214-7853

Laha, A and Sharma, Chandra Shekhar and Majumdar, Saptarshi (2017) Sustained drug release from multi-layered sequentially crosslinked electrospun gelatin nanofiber mesh. Materials Science and Engineering: C, 76. pp. 782-786. ISSN 0928-4931 (In Press)

Laha, A and Yadav, S and Majumdar, Saptarshi and Sharma, Chandra Shekhar (2016) In-vitro release study of hydrophobic drug using electrospun cross-linked gelatin nanofibers. Biochemical Engineering Journal, 105 (Part B). pp. 481-488. ISSN 1369-703X

Lakhete, P and Janardhanan, V (2014) Modeling process intensified catalytic plate reactor for synthesis gas production. Chemical Engineering Science, 110. pp. 13-19. ISSN 0009-2509

Lal, S and Janardhanan, V and M, Deepa and Sagar, A and Sahu, Kirti Chandra (2015) Low Cost Environmentally Benign Porous Paper Based Fuel Cells for Micro-Nano Systems. Journal of The Electrochemical Society, 162 (14). F1402-F1407. ISSN 0013-4651

Lal, S and M, Deepa and Janardhanan, V and Sahu, Kirti Chandra (2017) Paper based hydrazine monohydrate fuel cells with Cu and C composite catalysts. Electrochimica Acta, 232. pp. 262-270. ISSN 0013-4686

Li, C and Appari, S and Tanaka, R and Hanao, K and Lee, Y and Kudo, S and Hayashi, J-i and Janardhanan, V and Watanabe, H and Norinaga, K (2015) A CFD study on the reacting flow of partially combusting hot coke oven gas in a bench-scale reformer. Fuel, 159. pp. 590-598. ISSN 0016-2361

M

M, Anand and Kwack, K and Masud, A (2013) A new generalized Oldroyd-B model for blood flow in complex geometries. International Journal of Engineering Science, 72. pp. 78-88. ISSN 0020-7225

M, Durga Prakash and Vanjari, Siva Rama Krishna and Dutta, Asudeb and Challa, Subrahmanya Sastry and Singh, Shiv Govind (2014) Development of MWCNT/SU-8 nanofiber composite using electrospinning technique for biosensing applications. In: SENSORS, 2014 IEEE, 2-5 Nov, 2014, Valencia.

M, Susree and Mohan, Anand (2016) Reaction Mechanisms and Kinetic Constants used in Mechanistic Models of Coagulation and Fibrinolysis. Mathematical Modelling of Natural Phenomena, 11 (6). pp. 71-90. ISSN 1760-6101

M, Susree and Mohan, Anand (2017) A mathematical model for in vitro coagulation of blood: role of platelet count and inhibition. Sadhana. pp. 1-15. ISSN 0256-2499 (In Press)

M G, Karthik (2015) Organic Xerogel and PVDF derived Carbon Nano structures as Anode materials for Lithium Ion Batteries. Masters thesis, Indian Institute of Technology Hyderabad.

Maheshvare M, Deepa (2016) A Molecular Dynamics Study of Polyethylene. Masters thesis, Indian Institute of Technology Hyderabad.

Mailaram, Swarnalatha (2015) Techno-economic Analysis of Hydrodeoxygenation of Vegetable Oil for Production of Green Diesel Using Aspen Plus. Masters thesis, Indian Institute of Technology Hyderabad.

Maity, Sunil Kumar (2012) Correlation of solubility of single gases/hydrocarbons in polyethylene using PC-SAFT. Asia-Pacific Journal of Chemical Engineering, 7 (3). pp. 406-417. ISSN 1932-2135

Maity, Sunil Kumar (2023) Lactic acid and biomethane production from bread waste: a techno-economic and profitability analysis using pinch technology. Sustainable Energy & Fuels, 7 (13). pp. 3034-3046. ISSN 2398-4902

Maity, Sunil Kumar (2015) Opportunities, Recent Trends and Challenges of Integrated Biorefinery: Part I. Renewable and Sustainable Energy Reviews, 43. pp. 1427-1445. ISSN 1364-0321

Majumdar, Saptarshi and Kargupta, K and Ganguly, S and Ray, P (2011) Studies on the performance of the conducting polymer-based molecular release system. Polymer Engineering & Science, 51 (10). pp. 2001-2012. ISSN 0032-3888

Mallesham, Baithy and Rangaswamy, Agolu and Rao, Bolla Govinda and Rao, Tumula Venkateshwar and Reddy, Benjaram M. (2020) Solvent-Free Production of Glycerol Carbonate from Bioglycerol with Urea Over Nanostructured Promoted SnO2 Catalysts. Catalysis Letters, 150 (12). pp. 3626-3641. ISSN 1011-372X

Mamalis, D and Sefiane, K and Sahu, Kirti Chandra and Karapetsas, G and Matar, O K (2015) Non-isothermal spreading dynamics of self-rewetting droplets. In: 68th Annual Meeting of the APS Division of Fluid Dynamics, 22–24 November, 2015, Boston, Massachusetts.

Mamidi, Suresh (2016) Carbon Materials as Anode for Lithium Ion Batteries:Materials and Design Aspects. Masters thesis, Indian Institute of Technology Hyderabad.

Mangadody, Narasimha and A N, Mainza and P N, Holtham (2012) Multi - Component modelling concept for hydrocyclone classifier. In: 26th International Mineral Processing Congress, 24-28, September 2012, New Delhi; India.

Mangadody, Narasimha and A N, Mainza and P N, Holtham and M S, Powell and M S, Brennan (2014) A semi-mechanistic model of hydrocyclones — Developed from industrial data and inputs from CFD. International Journal of Mineral Processing, 133. pp. 1-12. ISSN 0301-7516

Mangadody, Narasimha and A N, Mainza and P N, Holtham and P N, Holtham (2012) Air-core modelling for hydrocyclones operating with solids. International Journal of Mineral Processing, 102-03. pp. 19-24. ISSN 0301-7516

Mangadody, Narasimha and J, Crasta and T, Sreenivas and A N, Mainza (2014) Performance of hydrocyclone separating bi-component mixture. In: XXVII International Mineral Processing Congress – IMPC 2014, 20-24 October, 2014, Sheraton Hotel, Santiago, Chile.

Mangadody, Narasimha and M S, Brennan and P N, Holtham (2012) CFD modeling of hydrocyclones: Prediction of particle size segregation. Minerals Engineering, 39. pp. 173-183. ISSN 0892-6875

Mangadody, Narasimha and V T S R, Kumar Reddy (2012) Simulating magnetite medium segregation in a dense medium cyclone using rheology based CFD model. In: 26th International Mineral Processing Congress, 24-28, September 2012, New Delhi; India.

Manohar, Sabbani (2016) CFD Simulation as an alternate diagnostic tool for a blocked artery. Masters thesis, Indian Institute of Technology Hyderabad.

Matta, D P and Tripathy, S and Vanjari, Siva Rama Krishna and Sharma, Chandra Shekhar and Singh, Shiv Govind (2016) An ultrasensitive label free nanobiosensor platform for the detection of cardiac biomarkers. Biomedical Microdevices, 18 (6). ISSN 1387-2176

Mattaparthi, S and Sharma, Chandra Shekhar (2013) Biomimicked Polymer Surfaces Exhibiting Superhydrophobic and Anti-Reflective Properties. Masters thesis, Indian Institute of Technology, Hyderabad.

Mattaparthi, S and Sharma, Chandra Shekhar (2014) Biomimicked high-aspect-ratio hierarchical superhydrophobic polymer surfaces. Bioinspired, Biomimetic and Nanobiomaterials, 3 (1). pp. 4-9. ISSN 2045-9858

Mattaparthi, S and Sharma, Chandra Shekhar (2015) Fabrication of Rough Polymer Surfaces Exhibiting Anti-reflective Properties. MRS Online Proceedings Library, 1728. ISSN 1946-4274

Mayank, K (2014) Development of DEM-CFD coupled model for determining Tumbling mill dynamics. Masters thesis, Indian Institute of Technology, Hyderabad.

Mayank, K and Malahe, M and Govender, I and Mangadody, Narasimha (2015) Coupled DEM-CFD Model to Predict the Tumbling Mill Dynamics. Procedia IUTAM, 15. pp. 139-149. ISSN 2210-9838 (Unpublished)

Mbanga, B L and Iyer, Balaji V S and Yashin, V V and Balazs, A C (2016) Tuning the Mechanical Properties of Polymer-Grafted Nanoparticle Networks through the Use of Biomimetic Catch Bonds. Macromolecules, 49 (4). pp. 1353-1361. ISSN 0024-9297

Menon, V and Fu, Q and Janardhanan, V and Deutschmann, O (2015) A model-based understanding of solid-oxide electrolysis cells (SOECs) for syngas production by H2O/CO2 co-electrolysis. Journal of Power Sources, 274. pp. 768-781. ISSN 0378-7753

Menon, V and Janardhanan, V and Deutschmann, O (2013) Modeling of Solid-Oxide Electrolyser Cells: From H2, CO Electrolysis to Co-Electrolysis. ECS Transactions, 57 (1). pp. 3207-3216. ISSN 1938-5862

Menon, V and Janardhanan, V and Deutschmann, O (2014) A mathematical model to analyze solid oxide electrolyzer cells (SOECs) for hydrogen production. Chemical Engineering Science, 110. pp. 83-93. ISSN 0009-2509

Menon, V and Janardhanan, V and Tischer, S and Deutschmann, O (2012) A novel approach to model the transient behavior of solid-oxide fuel cell stacks. Journal of Power Sources, 214. pp. 227-238. ISSN 0378-7753

Meshram, A (2014) A Study of Carbon Deposition during Dry Reforming of Biogas. Masters thesis, Indian Institute of Technology.

Miriyala, S S (2015) Analysis of Artificial Neural Networks For Building Automated Surrogate Algorithms. Masters thesis, Indian Institute of Technology Hyderabad.

Miriyala, S S and Mitra, Kishalay (2017) Novel sample size determination methods for parsimonious training of black box models. In: Indian Control Conference, ICC, 4-6 January, 2017, Indian Institute of Technology (IIT) Guwahati Guwahati; India.

Miriyala, S S and Mittal, P and Majumdar, Saptarshi and Mitra, Kishalay (2016) Comparative study of surrogate approaches while optimizing computationally expensive reaction networks. Chemical Engineering Science, 140. pp. 44-61. ISSN 0009-2509

Mishra, M and De Wit, A and Sahu, Kirti Chandra (2012) Double diffusive effects on pressure-driven miscible displacement flows in a channel. Journal of Fluid Mechanics, 712. pp. 579-597. ISSN 0022-1120

Mitra, Kishalay (2013) Chance Constrained Programming to Handle Uncertainty in Nonlinear Process Models, in Multi-Objective Optimization in Chemical Engineering: Developments and Applications. In: Multi-Objective Optimization in Chemical Engineering: Developments and Applications. John Wiley & Sons, Ltd., pp. 183-215. ISBN 9781118341667

Mitra, Kishalay (2013) Evolutionary Surrogate Optimization of an Industrial Sintering Process. Materials and Manufacturing Processes, 28 (7). pp. 768-778. ISSN 1042-6914

Mitra, Kishalay (2013) Parametric Sensitivity Through Optimization Under Uncertainty Approach. Computer Methods in Materials Science, 13 (1). pp. 107-112. ISSN 1641-8581

Mittal, P and Kulkarni, K and Mitra, Kishalay (2016) Multi-objective Optimization of Energy Generation and Noise Propagation: A Hybrid Approach. In: 2nd Indian Control Conference (ICC), JAN 04-06, 2016, Indian Inst Technol, Hyderabad, INDIA.

Mittal, P and Kulkarni, K and Mitra, Kishalay (2015) A Novel and Efficient Hybrid Optimization Approach for Wind Farm Micro-siting. IFAC papers online, 48 (8). pp. 397-402. ISSN 1474-6670

Mittal, P and Kulkarni, K and Mitra, Kishalay (2016) A novel hybrid optimization methodology to optimize the total number and placement of wind turbines. Renewable Energy, 86. pp. 133-147. ISSN 0960-1481

Mittal, P and Mitra, Kishalay (2017) Energy-noise trade-off to optimize the total number and the placement of wind turbines on wind farms: A hybrid approach. In: Indian Control Conference, ICC, 4-6 January, 2017, Indian Institute of Technology (IIT) Guwahati Guwahati; India.

Mittal, P and Mitra, Kishalay and Kulkarni, K (2017) Optimizing the number and locations of turbines in a wind farm addressing energy-noise trade-off: A hybrid approach. Energy Conversion and Management, 132. pp. 147-160. ISSN 0196-8904

Mogilicharla, A and Majumdar, S and Mitra, K (2014) Modeling and optimization of propylene polymerization with branching. Computer Aided Chemical Engineering, 33. pp. 1435-1440. ISSN 1570-7946

Mogilicharla, A and Chugh, T and Majumdar, Saptarshi and Mitra, Kishalay (2014) Multi-objective optimization of bulk vinyl acetate polymerization with branching. Materials and Manufacturing Processes, 29 (2). pp. 210-217. ISSN 1042-6914

Mogilicharla, A and Majumdar, S and Mitra, Kishalay (2014) Kinetic Analysis and Optimization of Long Chain Branched Propylene Polymerization System. In: 19th World Congress of the International Federation of Automatic Control, 24-29 August 2014, Cape Town, South Africa.

Mogilicharla, A and Majumdar, S and Mitra, Kishalay (2014) Modeling and Optimization of propylene polymerization with branching. In: 24th European Symposium on Computer Aided Process Engineering – ESCAPE 24, June 15-18, 2014, Budapest, Hungary.

Mogilicharla, A and Majumdar, S and Mitra, Kishalay (2015) Multiobjective optimization of long-chain branched propylene polymerization. Polymer Engineering & Science, 55 (5). pp. 1067-1076. ISSN 0032-3888

Mogilicharla, A and Majumdar, Saptarshi (2014) Controlled Branching of Industrially Important Polymers: Modeling and Multi-objective Optimization. PhD thesis, Indian Institute of Technology, Hyderabad.

Mogilicharla, A and Mitra, Kishalay and Majumdar, Saptarshi (2014) Modeling of propylene polymerization with long chain branching. Chemical Engineering Journal, 246. pp. 175-183. ISSN 1385-8947

Mogilicharla, A and Mittal, P and Majumdar, S and Mitra, Kishalay (2015) Kriging Surrogate Based Multi-objective Optimization of Bulk Vinyl Acetate Polymerization with Branching. Materials and Manufacturing Processes, 30 (4). pp. 394-402. ISSN 1042-6914

Monder, D S and Karan, K (2013) Coverage Dependent Thermodynamics for Sulfur Poisoning of Ni Based Anodes. In: ECS Transactions.

Monder, D S and Polisetty, V G and Jampana, Phanindra Varma and Janardhanan, V (2015) A Distributed Parameter Model for a Solid Oxide Fuel Cell: Simulating Realistic Operating Conditions. IFAC papers online, 48 (8). pp. 734-739. ISSN 1474-6670

N

N, Ajith Kumar (2016) Analysis of Calcium Dynamics: Parameter Estimation Using Genetic Algorithm. Masters thesis, Indian Institute of Technology Hyderabad.

N, Nandakumar and Mohan, Anand (2016) Pulsatile flow of blood through a 2D double-stenosed channel: effect of stenosis and pulsatility on wall shear stress. International Journal of Advances in Engineering Sciences and Applied Mathematics, 8 (1). pp. 61-69. ISSN 0975-0770

N, Nandakumar and Sahu, K C and M, Anand (2015) Pulsatile flow of a shear-thinning model for blood through a two-dimensional stenosed channel. European Journal of Mechanics, B/Fluids, 49 (Part A). pp. 29-35. ISSN 0997-7546

Nagajyothi, V and Mitra, Kishalay (2016) A Comparative Study of Fuzzy Techniques to Handle Uncertainty: An Industrial Grinding Process. Chemical Engineering & Technology. ISSN 0930-7516 (In Press)

Narasimhaiah, G and Janardhanan, V (2013) Modeling CO2 electrolysis in solid oxide electrolysis cell. Journal of Solid State Electrochemistry, 17 (8). pp. 2361-2370. ISSN 1432-8488

Nath, B and Biswas, G and Dalal, A and Sahu, Kirti Chandra (2017) Migration of a droplet in a cylindrical tube in the creeping flow regime. Physical Review E, 95 (3). 033110. ISSN 1539-3755

Nathani, Akash (2016) Block Copolymer Derived Electrospun Mesoporous Nanofibers. Masters thesis, Indian Institute of Technology Hyderabad.

Nayani, K and Katepalli, H and Sharma, Chandra Shekhar and Sharma, A and Patil, S and Venkataraghavan, R (2012) Electrospinning combined with nonsolvent-induced phase separation to fabricate highly porous and hollow submicrometer polymer fibers. Industrial and Engineering Chemistry Research, 51 (4). pp. 1761-1766. ISSN 0888-5885

Nerune, Virendra Prakash (2016) Development of Mathematical Model for Integrated Iron Ore Grinding Ball Mill-air Classifier Circuit: Energy-grind Optimization. Masters thesis, Indian Institute of Technology Hyderabad.

Nissi, V M (2014) Photocatalytic Conversion of Biomass Derived Oxygenated Compounds over Titania Supported Metal Catalyst. Masters thesis, Indian Institute of Technology, Hyderabad.

O

Ogunniran, K O and Mesubi, M A and Raju, K V S N and Tadigoppula, N (2015) Structural and in vitro anti-tubercular activity study of (E)-N'-(2,6-dihydroxybenzylidene)nicotinohydrazide and some transition metal complexes. Journal of the Iranian Chemical Society, 12 (5). pp. 815-829. ISSN 1026-1265

P

P, Praveen Kumar (2011) Assessment of Mass-Transfer Effects and Elementary Reaction Scheme for Catalytic Reactors. PhD thesis, Indian Institute of Technology.

P, S Haritha (2016) Fungal Lipase Production from Lab to Semi - pilot Scale by Solid State Fermentation. Masters thesis, Indian Institute of Technology Hyderabad.

P P, Naidu and Mohan, Anand (2014) Importance of VIIIa Inactivation in a Mathematical Model for the Formation, Growth, and Lysis of Clots. Mathematical Modelling of Natural Phenomena, 9 (6). pp. 17-33. ISSN 0973-5348

Padhi, Mandakini (2015) Understanding Multicomponent classification behavior in a Hydrocyclone. Masters thesis, Indian Institute of Technology Hyderabad.

Palla, V C S and Shee, Debaprasad and Maity, Sunil Kumar (2015) Conversion of Bio-Butanol to Hydrocarbons over HZSM-5. In: 24th North American Catalysis Society Meeting, June, 2015, David L. Lawrence Convention Center, Pittsburgh, PA.

Palla, V C S and Shee, Debaprasad and Maity, Sunil Kumar (2016) Conversion of n-butanol to gasoline range hydrocarbons, butylenes and aromatics. Applied Catalysis A: General, 526. pp. 28-36. ISSN 0926-860X

Pantula, Devi Priyanka (2016) Analysis of ANFIS and ANN for Building Automated Surrogate Algorithms. Masters thesis, Indian Institute of Technology Hyderabad.

Pantula, P D and Miriyala, S S and Mitra, Kishalay (2016) KERNEL: Enabler to Build Smart Surrogates for Online Optimization and Knowledge Discovery. Materials and Manufacturing Processes. ISSN 1042-6914 (In Press)

Pantula, P D and Miriyala, S S and Mitra, Kishalay (2017) Simultaneous knowledge discovery and development of smart neuro-fuzzy surrogates for online optimization of computationally expensive models. In: Indian Control Conference (ICC), 4-6 Jan. 2017.

Patnala, H S and Kabilan, U and L, Gopalakrishnan and Rao, R M D and Devarai, Santhosh Kumar (2016) Marine Fungal and Bacterial Isolates for Lipase Production: A Comparative Study. Advances in Food and Nutrition Research, 78. pp. 71-94. ISSN 1043-4526

Pawar, V B (2015) Modeling Study of High Fuel Utilization in Solid Oxide Fuel Cell. Masters thesis, Indian Institute of Technology Hyderabad.

Perambuduri, R (2015) Hydro-deoxygenation of Octanol over Supported Bimetallic Catalysts. Masters thesis, Indian Institute of Technology Hyderabad.

Pol, Tushar A (2016) Flow Investigation of Two Phase Flow in Bubble Column Using Particle Image Velocimetry and Image Processing. Masters thesis, Indian Institute of Technology Hyderabad.

Polisetty, V G and Jampana, Phanindra Varma (2013) State Estimation in Solid Oxide Fuel Cell(SOFC)System. Masters thesis, Indian Institute of Technology, Hyderabad.

Polisetty, Venkata Goutham and Jampana, Phanindra Varma (2020) Convergence of Particle Filter for Output Feedback Control. In: 18th European Control Conference 2020, ECC 2020, 12-15 May 2020.

Ponugoti, Venkata Prakash (2016) Modelling of Coal Devolatilization. Masters thesis, Indian Institute of Technology Hyderabad.

Prakash, M Durga and Singh, Shiv Govind and Sharma, Chandra Shekhar and Vanjari, Siva Rama Krishna (2017) Electrochemical Detection of Cardiac Biomarkers Utilizing Electrospun Multiwalled Carbon Nanotubes Embedded SU-8 Nanofibers. Electroanalysis, 29 (2). pp. 380-386. ISSN 1040 0397

Prasad, B V R S N and Janardhanan, V (2014) Modeling sulfur poisoning of ni-based anodes in solid oxide fuel cells. Journal of The Electrochemical Society, 161 (3). pp. 208-213. ISSN 0013-4651

Premlata, A R and Tripathi, M K and Karri, Badarinath and Sahu, Kirti Chandra (2017) Dynamics of an air bubble rising in a non-Newtonian liquid in the axisymmetric regime. Journal of Non-Newtonian Fluid Mechanics, 239. pp. 53-61. ISSN 0377-0257

Premlata, A R and Tripathi, M K and Karri, Badarinath and Sahu, Kirti Chandra (2017) Numerical and experimental investigations of an air bubble rising in a Carreau-Yasuda shear-thinning liquid. Physics of Fluids, 29 (3). ISSN 1070-6631

R

R, Anil (2014) A Computational Model to Predict Antibiotic Susceptibility of Pseudomonas Aeruginosa Biofilms. Masters thesis, Indian Institute of Technology, Hyderabad.

Raikwar, Deepak (2015) High Viscosity Sodium Alginate and Gelatin Hydrogels - A study on the impact of Molecular weight of plasticizer on swelling behaviour. Masters thesis, Indian Institute of Technology Hyderabad.

Randive, P and Dalal, A and Sahu, Kirti Chandra and Biswas, G and Mukherjee, P P (2015) Wettability effects on contact line dynamics of droplet motion in an inclined channel. Physical Review E, 91 (5). ISSN 1539-3755

Rao, T N and K H, Anulekha and Sharma, Chandra Shekhar (2015) Nanograined pure and SnO2 mixed Li4Ti5O12 structures as high performance anodes for lithium ion batteries. In: Large Lithium Ion Battery Technology and Application Symposium (LLIBTA), July, 2015, Detroit, Michigan.

Redapangu, P R and Sahu, Kirti Chandra (2013) Three-Dimensional LBM Simulations of Buoyancy-Driven Flow Using Graphics Processing Units. In: National Conference on Parallel Computing Technologies, 21-23 February 2013, Bangalore, India.

Redapangu, P R and Sahu, Kirti Chandra and Vanka, S P (2013) A lattice boltzmann simulation of three-dimensional displacement flow of two immiscible liquids in a square duct. Journal of Fluids Engineering, 135 (12). pp. 1-8. ISSN 0098-2202

Redapangu, P R and Sahu, Kirti Chandra and Vanka, S P (2012) A study of pressure-driven displacement flow of two immiscible liquids using a multiphase lattice Boltzmann approach. Physics of Fluids, 24 (10). pp. 102110-1. ISSN 1070-6631

Redapangu, P R and Vanka, S P and Sahu, Kirti Chandra (2012) Multiphase lattice Boltzmann simulations of buoyancy-induced flow of two immiscible fluids with different viscosities. European Journal of Mechanics, B/Fluids, 34. pp. 105-114. ISSN 0997-7546

Reddy, E H and S, Jayanti (2012) Thermal management strategies for a 1 kWe stack of a high temperature proton exchange membrane fuel cell. Applied Thermal Engineering, 48. pp. 465-475. ISSN 1359-4311

Reddy, S P (2014) Catalytic Conversion of Synthesis Gas to Dimethyl Ether over Cu-Zno/Meso-Sio2-Al2O3 Bi-Functional Catalysts. Masters thesis, Indian Institute of Technology.

Reddy, E H and Jayanti, S and Monder, D S (2014) Thermal management of high temperature polymer electrolyte membrane fuel cell stacks in the power range of 1-10 kWe. International Journal of Hydrogen Energy, 39 (35). pp. 20127-20138. ISSN 0360-3199

Reddy, P and Shukla, S and Karunarathne, A and Jana, Soumya and Giri, Lopamudra (2015) Segmentation of Neuron and Measurement of Optically Programed Neurite Growth: Fast Automation via Bayesian Thresholding. In: 7th Annual International IEEE EMBS Conference on Neural Engineering, 22 - 24 April, 2015, Montpellier, France,.

Reddy, P M K and Verma, P and Ch, Subrahmanyam (2016) Bio-waste derived adsorbent material for methylene blue adsorption. Journal of the Taiwan Institute of Chemical Engineers, 58. pp. 500-508. ISSN 1876-1070

Reddy, V T S R Kumar (2016) Developing A Comprehensive CFD Model for Dense Slurry Flow in Industrial Cyclones. PhD thesis, Indian Institute of Technology Hyderabad.

Rustam, S S (2014) Fuel utilization and its effect on solid oxide fuel cell performance. Masters thesis, Indian Institute of Technology, Hyderabad.

S

S, Madhu Seetharaman and Puvvala, N and P, Naresh Kumar and Singh, S P and M, Deepa and Namboothiry, M A G (2014) Efficient organic-inorganic hybrid perovskite solar cells processed in air. Physical Chemistry Chemical Physics, 16 (45). pp. 24691-24696. ISSN 1463-9076

Sagar, Anand (2015) Self Pumping Paper Based Formic Acid Fuel Cell. Masters thesis, Indian Institute of Technology Hyderabad.

Sahu, K C and Govindarajan, R (2014) Instability of a free-shear layer in the vicinity of a viscosity-stratified layer. Journal of Fluid Mechanics, 752. pp. 626-648. ISSN 0022-1120

Sahu, K C and Matar, O K (2010) Stability of Plane Channel Flow With Viscous Heating. Journal of Fluids Engineering, 132 (1). 7 pp.. ISSN 0098-2202

Sahu, Kirti Chandra (2013) Double diffusive effects on pressure-driven miscible channel flow: Influence of variable diffusivity. International Journal of Multiphase Flow, 55. pp. 24-31. ISSN 0301-9322

Sahu, Kirti Chandra (2016) Double-diffusive instability in core-annular pipe flow. Journal of Fluid Mechanics, 789. pp. 830-855. ISSN 0022-1120

Sahu, Kirti Chandra (2011) The instability of flow through a slowly diverging pipe with viscous heating. Journal of Fluids Engineering, 133 (7). pp. 1-8. ISSN 0098-2202

Sahu, Kirti Chandra (2021) A new linearly unstable mode in the core-annular flow of two immiscible fluids. Journal of Fluid Mechanics, 918 (A11). ISSN 0022-1120

Sahu, Kirti Chandra (2017) A review on rising bubble dynamics in viscosity-stratified fluids. Sadhana, 42 (4). pp. 575-573. ISSN 0256-2499

Sahu, Kirti Chandra and Ding, H and Matar, O K (2010) Numerical simulation of non-isothermal pressure-driven miscible channel flow with viscous heating. Chemical Engineering Science, 65 (10). pp. 3260-3267. ISSN 0009-2509

Sahu, Kirti Chandra and Govindarajan, R (2011) Linear stability of double-diffusive two-fluid channel flow. Journal of Fluid Mechanics, 687. pp. 529-539. ISSN 0022-1120

Sahu, Kirti Chandra and Govindarajan, R (2012) Spatio-temporal linear stability of double-diffusive two-fluid channel flow. Physics of Fluids, 24 (054103). 054103-1. ISSN 1070-6631

Sahu, Kirti Chandra and Govindarajan, R and Tripathi, M (2015) Linear stability analysis and direct numerical simulation of two layer channel flow. In: 68th Annual Meeting of the APS Division of Fluid Dynamics, 22–24 November, 2015, Boston, Massachusetts.

Sahu, Kirti Chandra and Matar, O K (2011) Three-dimensional convective and absolute instabilities in pressure-driven two-layer channel flow. International Journal of Multiphase Flow, 37 (8). pp. 987-993. ISSN 0301-9322

Sahu, Kirti Chandra and Matar, O K (2010) Three-dimensional linear instability in pressure-driven two-layer channel flow of a Newtonian and a Herschel-Bulkley fluid. Physics of Fluids, 22 (11). pp. 1-14. ISSN 1070-6631

Sahu, Kirti Chandra and Vanka, S P (2011) A multiphase lattice Boltzmann study of buoyancy-induced mixing in a tilted channel. Computers and Fluids, 50 (1). pp. 199-215. ISSN 0045-7930

Samavedi, S and Diaz-Rodriguez, P and Erndt-Marino, J D and Hahn, M S (2017) A Three-Dimensional Chondrocyte-Macrophage Coculture System to Probe Inflammation in Experimental Osteoarthritis. Tissue Engineering Part A, 23 (3-4). pp. 101-114. ISSN 1937-3368

Sankar, S and Sharma, Chandra Shekhar and Rath, Subha Narayan and Ramakrishna, S (2016) Electrospun Nanofibers to Mimic Natural Hierarchical Structure of Tissues: Application in Musculoskeletal Regeneration. Journal of Tissue Engineering and Regenerative Medicine. pp. 1-43. ISSN 1932-6254

Sasi, Kiran (2014) Unsteady state model of water content inside membrane of Polymer Electrolyte Membrane Fuel cell. Masters thesis, Indian Institute of Technology, Hyderabad.

Sasmal, Pradip and Challa, Subrahmanya Sastry and Jampana, Phanindra Varma (2015) On the existence of equivalence class of RIP-compliant matrices. In: International Conference on Sampling Theory and Applications (SampTA),, 25-29 May, 2015, Washington, DC.

Shah, K and Balsara, N and Banerjee, S and Chintapalli, M and Cocco, A P and Chiu, W K S and Lahiri, I and Martha, Surendra Kumar and Mistry, A and Mukherjee, P and Ramadesigan, V and Sharma, Chandra Shekhar and Subramanian, V R and Mitra, S and Jain, A (2017) State-of-the-art and Future Research Needs for Multiscale Analysis of Li-ion Cells. Journal of Electrochemical Energy Conversion and Storage, 14 (2). 020801. ISSN 2381-6872

Sharma, Chandra Shekhar and Abhishek, K and Katepalli, H and Sharma, A (2011) Biomimicked superhydrophobic polymeric and carbon surfaces. Industrial and Engineering Chemistry Research, 50 (23). pp. 13012-13020. ISSN 0888-5885

Sharma, Chandra Shekhar and Katepalli, H and Sharma, A and Teixidor, G T and Madou, M J (2014) Fabrication of Resorcinol-Formaldehyde Xerogel based High Aspect Ratio 3-D Hierarchical C-MEMS Structures. ECS Transactions, 61 (7). pp. 45-54. ISSN 1938-5862

Sharma, Chandra Shekhar and Khobragade, L and Ch, Subrahmanyam (2014) Synthesis, characterization and application of cellulose acetate derived electrospun carbon nanofibers. In: 247th National Spring Meeting of the American-Chemical-Society (ACS), 16-20 Mar, 2014, Dallas, TX.

Sharma, Chandra Shekhar and Mattaparthi, S (2014) Canna indica seedpod: An inspiration to fabricate high aspect ratio hierarchical superhydrophobic surfaces. In: 247th National Spring Meeting of the American-Chemical-Society (ACS), 16-20 Mar, 2014, Dallas, TX.

Sharma, Surbhi and Keerthi, Pujari Nagasree and Giri, Lopamudra and Mitra, Kishalay (2023) Toward Performance Improvement of a Baculovirus–Insect Cell System under Uncertain Environment: A Robust Multiobjective Dynamic Optimization Approach for Semibatch Suspension Culture. Industrial & Engineering Chemistry Research, 62 (1). pp. 111-125. ISSN 0888-5885

Shukla, Komal and Agarwalla, Sushama and Duraiswamy, Suhanya and Gupta, Raju Kumar (2021) Recent advances in heterogeneous micro-photoreactors for wastewater treatment application. Chemical Engineering Science, 235. p. 116511. ISSN 0009-2509

Sileri, D and Sahu, Kirti Chandra and Matar, O K (2011) Two-fluid pressure-driven channel flow with wall deposition and ageing effects. Journal of Engineering Mathematics, 71 (1). pp. 109-130. ISSN 0022-0833

Singh, R and Miriyala, S S and Giri, Lopamudra and Mitra, Kishalay and Kareenhalli, V V (2017) Identification of Unstructured model for Subtilin production through Bacillus subtilis using Hybrid Genetic Algorithm. Process Biochemistry, 60. pp. 1-12. ISSN 1359-5113

Sobha, K and Devarai, Santhosh Kumar (2016) Chemistry and Biology of Marine Sponge Collagens. In: Marine Sponges: Chemicobiological and Biomedical Applications. Springer India, pp. 359-372. ISBN 978-81-322-2792-2

Soumitri, M S and Majumdar, Saptarshi and Mitra, Kishalay (2015) Optimization using ANN Surrogates with Optimal Topology and Sample Size. IFAC papers online, 48 (8). pp. 1168-1173. ISSN 1474-6670

Srivastava, H and Dalal, A and Sahu, Kirti Chandra and Biswas, G (2017) Temporal linear stability analysis of an entry flow in a channel with viscous heating. International Journal of Heat and Mass Transfer, 109. pp. 922-929. ISSN 0017-9310

Swain, P A P and Karapetsas, G and Matar, O K and Sahu, Kirti Chandra (2015) Numerical simulation of pressure-driven displacement of a viscoplastic material by a Newtonian fluid using the lattice Boltzmann method. European Journal of Mechanics, B/Fluids, 49 (Part A). pp. 197-207. ISSN 0997-7546

Swaminathan, G and Sahu, K C and Sameen, A and Govindarajan, R (2011) Global instabilities in diverging channel flows. Theoretical and Computational Fluid Dynamics, 25 (1-4). pp. 53-64. ISSN 0935-4964

T

Theeda, P and P U, Praveen Kumar and Challa, Subrahmanya Sastry and Jampana, Phanindra Varma (2015) Optimization of Low-Dose Tomography via Binary Sensing Matrices. In: Combinatorial Image Analysis: 17th International Workshop, IWCIA 2015, Kolkata, India, November 24-27, 2015. Proceedings. Lecture Notes in Computer Science . Springer International Publishing, pp. 337-351. ISBN 978-3-319-26144-7

Tripathi, M K (2015) Rising bubbles and falling drops. PhD thesis, Indian Institute of Technology Hyderabad.

Tripathi, M K and Sahu, K C and Govindarajan, R (2015) Dynamics of an initially spherical bubble rising in quiescent liquid. Nature Communications, 6 (6268). ISSN 2041-1723

Tripathi, M K and Sahu, K C and Govindarajan, R (2014) Why a falling drop does not in general behave like a rising bubble. Scientific Reports, 4 (4771). pp. 1-9. ISSN 2045-2322

Tripathi, M K and Sahu, K C and Karapetsas, G and Matar, O K (2015) Bubble rise dynamics in a viscoplastic material. Journal of Non-Newtonian Fluid Mechanics, 49 (A). pp. 197-207. ISSN 0377-0257 (In Press)

Tripathi, M K and Sahu, K C and Karapetsas, G and Sefiane, K and Matar, O K (2015) Non-isothermal bubble rise: non-monotonic dependence of surface tension on temperature. Journal of Fluid Mechanics, 763. pp. 82-108. ISSN 0022-1120

Tripathi, M K and Sahu, Kirti Chandra (2015) Evaporating Falling Drop. Procedia IUTAM, 15. pp. 201-206. ISSN 2210-9838

V

Vakamalla, T R and Koruprolu, K B R and Arugonda, R and Mangadody, Narasimha (2017) Development of novel hydrocyclone designs for improved fines classification using multiphase CFD model. Separation and Purification Technology, 175. pp. 481-497. ISSN 1383-5866

Vakamalla, T R and Kumbhar, K S and Gujjula, R and Mangadody, Narasimha (2014) Computational and experimental study of the effect of inclination on hydrocyclone performance. Separation and Purification Technology, 138. pp. 104-117. ISSN 1383-5866

Vakamalla, T R and Mangadody, Narasimha (2015) Exploration of hydrocylone designs for improved ultra-fines classification using multiphase CFD model. In: International Comminution and Classification Congress (ICCC), 12-15 August, 2015, San Luis Potosi, Mexico.

Vakamalla, T R and Mangadody, Narasimha (2017) Numerical simulation of industrial hydrocyclones performance: Role of turbulence modelling. Separation and Purification Technology, 176. pp. 23-39. ISSN 1383-5866

Vakamalla, T R and Mangadody, Narasimha (2015) Rheology based CFD modeling of magnetite medium segregation in a dense medium cyclone. Powder Technology, 277. pp. 275-286. ISSN 0032-5910

Vakamalla, T R and Mangadody, Narasimha (2015) What happens when hydrocyclone operates at inclined positions? Detail flow field and performance analysis by CFD and Experiments. In: International Comminution and Classification Congress (ICCC), 12-15 August, 2015, San Luis Potosi, Mexico.

Vakamalla, T R and Vadlakonda, B and Aketi, V A K and Mangadody, Narasimha (2017) Multiphase CFD Modelling of Mineral Separators Performance: Validation Against Tomography Data. Transactions of the Indian Institute of Metals, 70 (2). pp. 323-340. ISSN 0972-2815

Vanka, S P and Shinn, A F and Sahu, Kirti Chandra (2011) Computational fluid dynamics using Graphics Processing Units: Challenges and opportunities. In: International Mechanical Engineering Congress and Exposition, IMECE 2011, 11-17, November 2011, Denver, CO; United States.

Varanasi, S K (2015) Continuous Time Identification of Systems with known and unknown order. Masters thesis, Indian Institute of Technology Hyderabad.

Varanasi, S K and Jampana, Phanindra Varma (2016) Parameter Estimation and Model Order Identification of LTI Systems. IFAC-PapersOnLine, 49 (7). pp. 1002-1007. ISSN 2405-8963

Vargheese, Vibin (2016) Catalytic depolymerzation of lignin over HZSM5. Masters thesis, Indian Institute of Technology Hyderabad.

Verma, R and Lal, S and M, Deepa and Janardhanan, V and Sahu, Kirti Chandra (2016) Sodium Percarbonate Based, Mixed-Media Fuel Cells Supported on Paper with Gold/Nickel Oxide Catalysts. ChemElectroChem. ISSN 2196-0216 (In Press)

Virivinti, N and Mitra, Kishalay (2014) Expected value analysis for an industrial grinding process with fuzzy uncertain parameters. Computer Aided Chemical Engineering, 33. pp. 1453-1458. ISSN 1570-7946

Virivinti, N and Mitra, Kishalay (2014) Fuzzy Expected Value Analysis of an Industrial Grinding Process. Powder Technology, 286. pp. 9-18. ISSN 0032-5910

Virivinti, N and Mitra, Kishalay (2017) Fuzzy robust optimization for handling feed stream and model parameter uncertainties during comminution process. Journal of the Taiwan Institute of Chemical Engineers, 70. pp. 411-425. ISSN 1876-1070

Virivinti, N and Mitra, Kishalay (2015) Intuitionistic Fuzzy Chance Constrained Programming for Handling Parametric Uncertainty: An Industrial Grinding Case Study. Industrial and Engineering Chemistry Research, 54 (24). pp. 6291-6304. ISSN 0888-5885

Virivinti, Nagajyothi (2017) Intuitionistic Fuzzy Logic Based Uncertainty Handling of Industrial Grinding Process. PhD thesis, Indian Institute of Technology Hyderabad.

Vudikala, C (2014) Characterization of Bubble Column Using Electrical Resistance Tomography and Image Processing. Masters thesis, Indian Institute of Technology, Hyderabad.

Vuppala, P (2015) Predicting Liquid-Liquid Equilibrium Using DPD Interaction Parameters. Masters thesis, Indian Institute of Technology Hyderabad.

W

Wakale, A B and K, Venkatasubbaiah and Sahu, Kirti Chandra (2015) A parametric study of buoyancy-driven flow of two-immiscible fluids in a differentially heated inclined channel. Computers and Fluids, 17 (01). pp. 54-61. ISSN 0045-7930

X

Xu, Ze-Lai and Chen, Jun-Yuan and Liu, Hao-Ran and Sahu, Kirti Chandra and Ding, Hang (2021) Motion of self-rewetting drop on a substrate with a constant temperature gradient. Journal of Fluid Mechanics, 915 (A116). ISSN 0022-1120 (In Press)

Y

Yadav, S and Illa, M P and Sharma, Chandra Shekhar (2016) High absorbency cellulose acetate electrospun nanofibers for feminine hygiene application. Applied Materials Today, 4. pp. 62-70. ISSN 2352-9407

Yadav, Shital (2015) Polymer Submicron- and Nano- Fibers: Applications in Healthcare, Drug delivery, Oil Spill Remediation and Print Transfer. Masters thesis, Indian Institute of Technology Hyderabad.

Yadav, V P and Maity, Sunil Kumar and Biswas, P and Singh, R K (2011) Kinetics of esterification of ethylene glycol with acetic acid using cation exchange resincatalyst. Chemical and Biochemical Engineering Quarterly, 25 (3). pp. 359-366. ISSN 0352-9568

Yadav, V P and Maity, Sunil Kumar and Shee, Debaprasad (2016) Etherification of Glycerol with Ethanol over Solid Acid Catalysts: Kinetic Study Using Cation Exchange Resin. Indian Chemical Engineer, 59 (2). pp. 117-135. ISSN 0019-4506 (In Press)

Yenumala, S R and Maity, Sunil Kumar (2011) Reforming of vegetable oil for production of hydrogen: A thermodynamic analysis. International Journal of Hydrogen Energy, 36 (18). pp. 11666-11675. ISSN 0360-3199

Yenumala, S R and Maity, Sunil Kumar (2012) Thermodynamic evaluation of dry reforming of vegetable oils for production of synthesis gas. Journal of Renewable and Sustainable Energy, 4 (043120). ISSN 1941-7012

Yenumala, S R and Maity, Sunil Kumar and Shee, Debaprasad (2016) Hydrodeoxygenation of karanja oil over supported nickel catalysts: influence of support and nickel loading. Catalysis Science and Technology, 6 (9). pp. 3156-3165. ISSN 2044-4753

Yenumala, S R and Maity, Sunil Kumar and Shee, Debaprasad (2016) Reaction mechanism and kinetic modeling for the hydrodeoxygenation of triglycerides over alumina supported nickel catalyst. Reaction Kinetics, Mechanisms and Catalysis. ISSN 1878-5190 (In Press)

This list was generated on Thu Mar 28 20:16:00 2024 IST.