Items where Subject is "Others > Aerospace Technology"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: A | B | C | D | E | G | H | J | K | M | N | P | R | S | T | V
Number of items at this level: 39.

A

Abhijith, M. S. and Venkatasubbaiah, K. (2021) NUMERICAL STUDY OF VARIATION IN DRAG AND VIRTUAL MASS FORCES FOR A NANOFLUID FLOW THROUGH A MICROCHANNEL USING EULERIAN-EULERIAN TWO-PHASE MODEL. Computational Thermal Sciences: An International Journal, 13 (2). pp. 57-73. ISSN 1940-2503

Andraju, L. B. and Ramji, M. and et al, . (2021) Snap-buckling and failure studies on CFRP laminate with an embedded circular delamination under flexural loading. Composites Part B: Engineering, 214. p. 108739. ISSN 13598368

Athkuri, Sai Saketha Chandra and Eswaran, Vinayak (2020) A new auxiliary volume-based gradient algorithm for triangular and tetrahedral meshes. Journal of Computational Physics, 422. p. 109780. ISSN 00219991

B

Babu, G. V. N. Yatendra and Sarkar, Vaskar (2020) Transient Instability Mitigation via Repetitive Corrective Actions Based Upon the Real-Time Macrocoherency Evaluation. IEEE Systems Journal, 14 (4). pp. 5084-5095. ISSN 1932-8184

Bhagat, Apurva and Gijare, Harshal and Dongari, Nishanth (2019) Modeling of a reaction control jet interacting with high-speed cross-flow in slip flow regime. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering. 095441001983690. ISSN 0954-4100

Bhatnagar, S and Mullick, S and Gopinath, M (2021) A lumped parametric analytical model for predicting molten pool temperature and clad geometry in pre-placed powder laser cladding. Optik, 247. p. 168015. ISSN 0030-4026

C

Chakraborty, Debasis and Eswaran, Vinayak and Sharma, Vatsalya (2020) Computational Analysis of Transverse Sonic Injection in Supersonic Crossflow Using RANS Models. Journal of Fluids Engineering, 142 (6). ISSN 0098-2202

Choudhury, Anjishnu and Dey, Mohar and Dixit, Harish N. and Feng, James J. (2021) Tear-film breakup: The role of membrane-associated mucin polymers. Physical Review E, 103 (1). ISSN 2470-0045

D

D. Ratolikar, Mangesh and R, Prasanth Kumar (2020) Optimal 5R parallel leg design for quadruped robot gait cycle. In: 49th International Conference on Vibroengineering, 26-28 November 2020, Almaty.

E

Ellyana Roslan, Rose Alifah and Mamat, Sarizam and Teo, Pao Ter and Mohamad, Firdaus and Gudur, Srinath and Toshifumi, Yuji and Tashiro, Shinichi and Tanaka, Manabu (2020) Observation of Arc Behaviour in TIG/MIG Hybrid Welding Process. In: International Conference on Science and Technology 2020, ICoST 2020, 10 September 2020, Virtual, Online.

G

Godbole, Kirtiratan and Das, C. R. and Joardar, J. and Albert, S. K. and Ramji, M. and Panigrahi, Bharat B. (2020) Toughening of AISI 410 Stainless Steel Through Quenching and Partitioning and Effect of Prolonged Aging on Microstructure and Mechanical Properties. Metallurgical and Materials Transactions A, 51 (7). pp. 3377-3383. ISSN 1073-5623

H

Harish, R and Venkatasubbaiah, K (2013) Numerical Simulation of fire spread in elevator shaft connected to adjacent lobby in tall building. In: 13th International conference on Fire Science and Engineering, 24-26 June 2013, University of London, UK.

J

Joy, Nikhita and Anuraj, R. and Viravalli, Amartya and Dixit, Harish N. and Samavedi, Satyavrata (2021) Coupling between voltage and tip-to-collector distance in polymer electrospinning: Insights from analysis of regimes, transitions and cone/jet features. Chemical Engineering Science, 230. p. 116200. ISSN 00092509

K

Kalkote, Nikhil and Assam, Ashwani and Eswaran, Vinayak (2020) Toward the implementation of a multi-component framework in a density-based flow solver for handling chemically reacting flows. International Journal of Numerical Methods for Heat & Fluid Flow, ahead- (ahead-). ISSN 0961-5539

Kalkote, Nikhil Narayan and Kumar, Ashutosh and Eswaran, Vinayak and et al, . (2020) Performance of the k-kL model for aerodynamics applications. International Journal of Numerical Methods for Heat & Fluid Flow, 22 (7). pp. 3985-4011. ISSN 0961-5539

Karanam, Madhu Kiran and Gulivindala, Gopi and Chinthapenta, Viswanath R. (2021) Effect of anisotropy on the ductile fracture in metal reinforcements of brittle matrix composites. Theoretical and Applied Fracture Mechanics, 112 (102923). ISSN 01678442

Katre, Pallavi and Banerjee, Sayak and Balusamy, Saravanan and Sahu, Kirti Chandra (2021) Fluid dynamics of respiratory droplets in the context of COVID-19: Airborne and surfaceborne transmissions. Physics of Fluids, 33 (8). 081302. ISSN 1070-6631

Kochar, Prashant and Sharma, Abhay and Suga, Tetsuo and et al, . (2019) Prediction and Control of Asymmetric Bead Shape in Laser-Arc Hybrid Fillet-Lap Joints in Sheet Metal Welds. Lasers in Manufacturing and Materials Processing, 6 (1). pp. 67-84. ISSN 2196-7229

Konka, P. and Lingam, R. and Singh, U. A. and Shivaprasad, CH. and Reddy, N. V. (2020) Enhancement of accuracy in double sided incremental forming by compensating tool path for machine tool errors. The International Journal of Advanced Manufacturing Technology, 111 (3-4). pp. 1187-1199. ISSN 0268-3768

Kumar, Manish and Quadir Moinuddin, Syed and Kumar, S. Surya and Sharma, Abhay (2021) Discrete wavelet analysis of mutually interfering co-existing welding signals in twin-wire robotic welding. Journal of Manufacturing Processes, 63. pp. 139-151. ISSN 15266125

M

M.S, A. and Venkatasubbaiah, K. (2020) Numerical investigation of jet impingement flows with different nanofluids in a mini channel using Eulerian-Eulerian two-phase method. Thermal Science and Engineering Progress, 19. p. 100585. ISSN 24519049

MS, A. and Venkatasubbaiah, K. (2021) Numerical investigation on laminar forced convection of MEPCM-water slurry flow through a micro-channel using Eulerian-Eulerian two-phase model. Thermal Science and Engineering Progress, 22. p. 100803. ISSN 24519049

Mishra, Rajnish and Pillai, Anoop and Imam, Murshid and Chinthapenta, Viswanath and et al, . (2022) Experimental and Numerical Investigation of Double Pass Overlapping Beads by Twin-Wire Welding Additive Manufacturing Process. Transactions of the Indian Institute of Metals. ISSN 0972-2815

Mishra, Sumeet and Yazar, K. U. and Kar, Amlan and Lingam, R. and Reddy, N. V. and Prakash, Om and Suwas, Satyam (2021) Texture and Microstructure Evolution During Single-Point Incremental Forming of Commercially Pure Titanium. Metallurgical and Materials Transactions A, 52 (1). pp. 151-166. ISSN 1073-5623

Mohan, Shashi Ranjan and Khaderi, Syed Nizamuddin and Simhambhatla, Suryakumar (2020) 3D Printing of Components with Tailored Properties Through Hilbert Curve Filling of a Discretized Domain. 3D Printing and Additive Manufacturing, 7 (6). pp. 288-299. ISSN 2329-7662

N

N, Rajesh and K, Venkatasubbaiah (2017) Two-phase analysis on the conjugate heat transfer performance of microchannel with Cu, Al, SWCNT and hybrid nanofluids. Journal of Thermal Science and Engineering Applications, 9 (4). 041011-041021. ISSN 1948-5085

P

Potukuchi, Sasidhar and Chinthapenta, Viswanath and Raju, Gangadharan (2022) A review of NDE techniques for hydrogels. Nondestructive Testing and Evaluation. pp. 1-33. ISSN 1058-9759

R

Rajan, H and Venkatasubbaiah, K (2013) Entrainment effects through horizontal and vertical vents on turbulent natural convection flows. In: 22nd National and 11th International ISHMT-ASME Heat and Mass Transfer Conference, 28-31 december 2013, IIt Kharagpur, India.

Ranjan, Prabhat and Pandey, Ashok Kumar (2021) Modeling of pinning phenomenon in Iwan model for bolted joint. Tribology International, 161. p. 107071. ISSN 0301679X

Reddy, Veerabhadra and Venkatesham, B. and Narayana Murthy, Vijaya (2020) Prediction of acoustic modal characteristics of two dimensional irregular shaped cavities by impedance mobility compact matrix (IMCM) approach. Journal of Theoretical and Applied Mechanics, 59 (1). pp. 95-107. ISSN 1429-2955

S

Satish, N. and Venkatasubbaiah, K. (2020) Conjugate heat transfer analysis of liquid metal turbulent flow through a horizontal channel by LES. Numerical Heat Transfer, Part A: Applications, 78 (4). pp. 140-157. ISSN 1040-7782

Sriramoju, S K and Kumar, D and Majumdar, Saptarshi and Dash, P S and Shee, Debaprasad and Banerjee, Raja (2021) Sustainability of coal mines: Separation of clean coal from the fine-coal rejects by ultra-fine grinding and density-gradient-centrifugation. Powder Technology, 383. pp. 356-370. ISSN 0032-5910

Swami, Aakash and Pandey, Ashok Kumar (2020) Vibration Analysis of a Tire Under Static Loading Using Flexible Ring-Based Model. Journal of Vibration and Acoustics, 143 (1). pp. 1-11. ISSN 1048-9002

T

Tekure, V. and Venkatasubbaiah, K. (2021) Effect of Mach number and plate thickness on the flow field and heat transfer characteristics of supersonic turbulent flow over a flat plate at different thermal boundary conditions. European Journal of Mechanics - B/Fluids, 88. pp. 160-177. ISSN 09977546

Tekure, V. and Venkatasubbaiah, K. (2021) Numerical investigation on the extrusive and intrusive subcavity types and their location on the primary recirculation zone for the supersonic turbulent flow through cavity type flameholders. Thermal Science and Engineering Progress, 25. p. 100987. ISSN 24519049

Tiwari, Sankalp and Vyasarayani, C. P. and Chatterjee, Anindya (2021) Data suggest COVID-19 affected numbers greatly exceeded detected numbers, in four European countries, as per a delayed SEIQR model. Scientific Reports, 11 (1). ISSN 2045-2322

Tripathi, Manish and Misra, Ajay and M S, Mahesh (2019) Effect of Planar Member Cross-Section on Cascade Fin Aerodynamics. Journal of Spacecraft and Rockets, 56 (3). pp. 744-760. ISSN 0022-4650

V

Vaishya, Shri and Abhyankar, Abhijit and Sarkar, Vaskar (2020) Marginal Loss Modeling based DCOPF and LMP Calculations for an Integrated AC and Multi-terminal HVDC System. IEEE Transactions on Power Systems, 36 (3). p. 1. ISSN 0885-8950

Vamsi Krishna, G. and Viswanath, C. and Pandey, Ashok Kumar (2020) Performance of Bolted Joint Modelling Using Master Element. Lecture Notes in Mechanical Engineering. pp. 595-605. ISSN 2195-4356

This list was generated on Fri Mar 29 11:44:58 2024 IST.