Browse by IITH Authors

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 40.

Article

Mohan, Shashi Ranjan and Khaderi, Syed Nizamuddin and Simhambhatla, Suryakumar (2020) 3D Printing of Components with Tailored Properties Through Hilbert Curve Filling of a Discretized Domain. 3D Printing and Additive Manufacturing, 7 (6). pp. 288-299. ISSN 2329-7662

Matsumoto, Mitsutaka and Hirose, Shingo and Martinsen, Kristian and Simhambhatla, Suryakumar and Reddy, Venkata and Guldbrandsen-Dahl, Sverre (2020) Additive Manufacturing for Circular Manufacturing: Trends and Challenges—A Survey in Japan, Norway, and India. Sustainable Production, Life Cycle Engineering and Management. pp. 517-532. ISSN 2194-0541

Akiwate, Deepak C and Date, Mahendra D and B, Venkatesham and Suryakumar, S (2019) Acoustic characterization of additive manufactured perforated panel backed by honeycomb structure with circular and non-circular perforations. Applied Acoustics, 155 (1). pp. 271-279. ISSN 0003-682X

Akiwate, Deepak C and Venkatesham, B and Suryakumar, S and et al, . (2019) Acoustic characterization of additive manufactured perforated panel backed by honeycomb structure with circular and non-circular perforations. Applied Acoustics, 155. pp. 271-279. ISSN 0003682X

S, Suryakumar and Date, Mahendra D and Balide, Venkatesham and et al, . (2019) Acoustic measurement of additive manufactured concentric tube reverse flow resonators. Mechanics of Advanced Materials and Structures, 26 (1). pp. 56-61. ISSN 1537-6494

Akiwate, Deepak C and Date, Mahendra D and Balide, Venkatesham and S, Suryakumar (2019) Acoustic measurement of additive manufactured concentric tube reverse flow resonators. Mechanics of Advanced Materials and Structures, 26 (1). pp. 56-61. ISSN 1537-6494

Mohan, Shashi Ranjan and S, Suryakumar (2019) Adopting feature resolution and material distribution constraints into topology optimisation of additive manufacturing components. Virtual and Physical Prototyping, 14 (1). ISSN 1745-2759

Mohan, Shashi Ranjan and S, Suryakumar (2019) Adopting feature resolution and material distribution constraints into topology optimisation of additive manufacturing components. Virtual and Physical Prototyping, 14 (1). pp. 79-91. ISSN 1745-2759

Reddy, Santhan and Kumar, Manish and Panchagnula, Jayaprakash Sharma and Parchuri, Pradeep Kumar and S, Suryakumar and Ito, Kazuhiro and Sharma, Abhay (2019) A new approach for attaining uniform properties in build direction in additive manufactured components through coupled thermal-hardness model. Journal of Manufacturing Processes, 40. pp. 46-58. ISSN 1526-6125

Akiwate, Deepak C and Date, Mahendra D and B, Venkatesham and S, Suryakumar (2018) Acoustic properties of additive manufactured narrow tube periodic structures. Applied Acoustics, 136. pp. 123-131. ISSN 0003-682X

Panchagnula, Jayaprakash Sharma and Simhambhatla, S (2018) Manufacture of complex thin-walled metallic objects using weld-deposition based additive manufacturing. Robotics and Computer-Integrated Manufacturing, 49. pp. 194-203. ISSN 0736-5845

Somashekara, M A and Naveenkumar, M and Kumar, A and Chinthapenta, Viswanath and S, Suryakumar (2017) Investigations into effect of weld-deposition pattern on residual stress evolution for metallic additive manufacturing. International Journal of Advanced Manufacturing Technology, 90 (5-8). pp. 2009-2025. ISSN 0268-3768

Somashekara, M A and Simhambhatla, S (2017) Studies on Dissimilar Twin-Wire Weld-Deposition for Additive Manufacturing Applications. Transactions of the Indian Institute of Metals, 70 (8). pp. 2123-2135. ISSN 0972-2815

M Adinarayanappa, S and Simhambhatla, S and Campbell, R. Ian and Gibson, Ian (2017) Twin-wire welding based additive manufacturing (TWAM): manufacture of functionally gradient objects. Rapid Prototyping Journal, 23 (5). pp. 858-868. ISSN 1355-2546

Panchagnula, Jayaprakash Sharma and Simhambhatla, S (2016) Feature based Weld-Deposition for Additive Manufacturing of Complex Shapes. Journal of The Institution of Engineers (India): Series C. pp. 1-8. ISSN 2250-0545 (In Press)

K P, Karunakaran and Simhambhatla, S and U, Chandrasekhar and A, Bernard (2016) Hybrid rapid manufacturing of metallic objects. International Journal of Rapid Manufacturing, 1 (4). p. 2016. ISSN 1757-8817

Panchagnula, Jayaprakash Sharma and Simhambhatla, S (2016) Inclined slicing and weld-deposition for additive manufacturing of metallic objects with large overhangs using higher order kinematics. Virtual and Physical Prototyping, 11 (2). pp. 99-108. ISSN 1745-2759

Simhambhatla, S and Karunakaran, K P (2015) Build strategies for rapid manufacturing of components of varying complexity. Rapid Prototyping Journal, 21 (3). pp. 340-350. ISSN 1355-2546

Simhambhatla, S and Karunakaran, K P and Chandrasekhar, U and Somashekara, M A (2013) A Study of the Mechanical Properties of Objects Built through Weld-Deposition. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. pp. 1-10. ISSN 0954-4054

S, Suryakumar and Karunakaran, K P and Bernard, A and Chandrasekhar, U and Raghavender, N and Sharma, D (2011) Weld bead modeling and process optimization in Hybrid Layered Manufacturing. Computer-Aided Design, 43 (4). pp. 331-344. ISSN 0010-4485

Book Section

Matsumoto, M. and Hirose, S. and Martinsen, K. and Simhambhatla, S. and et al, . (2020) Additive manufacturing for circular manufacturing: trends and challenges—a survey in Japan, Norway, and India. In: EcoDesign and Sustainability. Springer Singapore, Singapore, pp. 517-532. ISBN 978-981-15-6779-7

Conference or Workshop Item

Akiwate, D. and Date, M. and Venkatesham, B. and Suryakumar, S. (2021) Acoustic Properties of Additive Manufactured Porous Material. In: 46th National Symposium on Acoustics, NSA 2017, 28 October 2017 to 30 October 2017, Aligarh.

Akiwate, Deepak C. and Date, Mahendra D. and Venkatesham, B. and Suryakumar, S. (2020) Acoustic Properties of Additive Manufactured Porous Material. In: Lecture Notes in Mechanical Engineering, 28-30 October 2017.

Peddiraju, Vivek Chaitanya and Suryakumar, S and Chatterjee, Subhradeep and et al, . (2019) Weld deposition of nickel on titanium for surface hardening with Ti-Ni-based intermetallic compounds. In: International Conference on Materials and Manufacturing Methods (3M ), 5-7 July 2019, Trichy, India. (In Press)

Mohan, Shashi Ranjan and S, Suryakumar (2018) Fabrication of Gradient Density components through Extrusion based Additive Manufacturing. In: 7th International And 28th All India Manufacturing Technology, Design And Research, 13-15 December 2018, Chennai, India.

Panchagnula, Jayaprakash Sharma and Simhambhatla, S (2016) Additive Manufacturing of Complex Shapes Through Weld-Deposition and Feature Based Slicing. In: ASME International Mechanical Engineering Congress and Exposition (IMECE2015), Nov 13-19, 2015, Houston, TX.

Sharma, Abhay and Suryakumar, S and Sharma, Jayaprakash and et al, . (2016) Investigation on Cooling Strategies during Wire Arc Additive Layer Manufacturing. In: Visual-JW 2016, 17 -18 October 2016, Osaka.

Ansari, S and Date, M and Simhambhatla, S and Rath, Subha Narayan (2016) A Review of Hydrogels in Droplet-based Bio-Fabrication Techniques. In: 2nd International Conference on Digital Fabrication (ICDF 2016), 3-5 Mar, 2016, Tokyo, Japan.

Panchagnula, Jayaprakash Sharma and Sharma, Abhay and Simhambhatla, S (2016) Thermal management in manufacture of thin-walled components produced by arc-based additive manufacturing. In: 10th International Conference on Trends in Welding Research, 11 -14 October 2016, Tokyo, Japan.

Somashekara, M A and Suryakumar, S (2014) Determination of Process Parameter for Twin-Wire Weld-Deposition Based Additive Manufacturing. In: ASME 2014 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 17-20 August 2014, Buffalo, New York, USA.

S, Suryakumar and Somashekara, M A (2013) Manufacturing of functionally gradient materials by using weld-deposition. In: International Joint Symposium on Joining and Welding, 06-08 Nov, 2013, Osaka, Japan.

Suryakumar, S and M A, Somashekara (2013) Preliminary study of process parameters for weld-deposition using twin wire system. In: 3rd International Conference & Exhibition on Additive Manufacturing Technologies AMSI, 7-8 October 2013, Bangalore, India.

Thesis

Pandey, Pushkar Kumar and Suryakumar, S (2019) Manufacturing of Large Metallic Components through Wire and Arc Additive Manufacturing(WAAM). Masters thesis, Indian institute of technology Hyderabad.

Goka, Suresh and S, Suryakumar (2019) Thermo-Mechanical Analysis and Characterization of Wire Arc Additive Manufactured Components. PhD thesis, Indian institute of technology Hyderabad.

Hedau, Mridul and S, Suryakumar (2018) Temperature Distribution during Single Pass Multi-Layer Welding in Additive Manufacturing. Masters thesis, Indian Institute of Technology Hyderabad.

Khare, Vivek Kumar and S, Suryakumar (2018) Thermal Management Approaches for Distortion Control in Metal Additive Manufacturing. Masters thesis, Indian Institute of Technology Hyderabad.

Panchagnula, Jayaprakash Sharma and S, Suryakumar (2017) Additive manufacturing of complex metallic objects with overhanging features: slicing and path planning strategies. PhD thesis, Indian institute of technology Hyderabad.

Balu, Kumthekar Nitin and S, Suryakumar (2017) Experimental Studies on Assessment and Reduction of Surface Waviness for Weld Deposition based Additive Manufacturing. Masters thesis, Indian institute of technology Hyderabad.

M A, Somashekara and S, Suryakumar (2016) MANUFACTURE OF FUNCTIONALLY GRADIENT OBJECTS THROUGH WELD-DEPOSITION. PhD thesis, Indian institute of technology Hyderabad.

P, Vinay kumar and S, Suryakumar (2012) Evaluation of Rapid Manufacturing Solutions for Improved Knee Implants Using Finite Element Analysis. Masters thesis, Indian Institute of Technology Hyderabad.

This list was generated on Thu Aug 11 05:24:18 2022 IST.