Items where Division is "Department of Mechanical & Aerospace Engineering" and Year is 2019

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | E | G | H | J | K | L | M | N | P | R | S | T | V | Y
Number of items: 118.

A

Abraham, Anoop Sam and Banerjee, Raja (2019) Development of a Non-Reacting LES Solver for Unstructured Grid. Masters thesis, Indian institute of technology Hyderabad.

Agrawal, Govind and Vyasarayani, C P (2019) Simulation and modeling the heat exchanger tubes under cross flow fluid condition. Masters thesis, Indian institute of technology Hyderabad.

Akiwate, Deepak C and B, Venkatesham (2019) Acoustic Analysis of Additive Manufactured Multilayer Periodic Structures. PhD thesis, Indian Institute of Technology Hyderabad.

Akiwate, Deepak C and Date, Mahendra D and B, Venkatesham and Suryakumar, S (2019) Acoustic characterization of additive manufactured perforated panel backed by honeycomb structure with circular and non-circular perforations. Applied Acoustics, 155 (1). pp. 271-279. ISSN 0003-682X

Akiwate, Deepak C and Date, Mahendra D and Balide, Venkatesham and S, Suryakumar (2019) Acoustic measurement of additive manufactured concentric tube reverse flow resonators. Mechanics of Advanced Materials and Structures, 26 (1). pp. 56-61. ISSN 1537-6494

Akiwate, Deepak C and Venkatesham, B and Suryakumar, S and et al, . (2019) Acoustic characterization of additive manufactured perforated panel backed by honeycomb structure with circular and non-circular perforations. Applied Acoustics, 155. pp. 271-279. ISSN 0003682X

Andraju, Lala Bahadur and Raju, Gangadharan (2019) Modeling and Simulation of Delamination in Composite Laminates using Hybrid Brick Elements - CFRAC 2019. In: VI International Conference on Computational Modeling of Fracture and Failure of Materials and Structures, 12-14 June 2019, Braunschweig, Germany.

Ashok, Akarapu and Nighot, Rohit Prakash and Sahu, Nagesh Kumar and et al, . (2019) Design and analysis of microcantilever beams based on arrow shape. Microsystem Technologies. ISSN 0946-7076 (In Press)

Ashok, Akarapu and Pandey, Ashok Kumar and Pal, Prem and et al, . (2019) Design and analysis of microcantilever beams based on arrow shape. Microsystem Technologies. ISSN 0946-7076

Ashok, B and Jeevanantham, A K and Nanthagopal, K and B, Saravanan and M, Senthil Kumar and Johny, Ajith and Mohan, Aravind and Kaisan, Muhammad Usman and Abubakar, Shitu (2019) An experimental analysis on the effect of n-pentanol- Calophyllum Inophyllum Biodiesel binary blends in CI engine characteristcis. Energy, 173. pp. 290-305. ISSN 0360-5442

Assam, Ashwani and Eswaran, Vinayak (2019) Development of an Unstructured CFD Solver for External Aerothermodynamics and Nano/Micro Flows. PhD thesis, Indian institute of technology Hyderabad.

Assam, Ashwani and Kalkote, Nikhil Narayan and Dongari, Nishanth and Eswaran, Vinayak (2019) Investigation of non-equilibrium boundary conditions considering sliding friction for micro/nano flows. International Journal of Numerical Methods for Heat & Fluid Flow, ahead- (ahead-). ISSN 0961-5539 (Submitted)

B

Balide, Venkatesham and Nidheesh, V and Jade, Nagaraja (2019) Influence of Duct Joint on Modal Parameters of Rectangular Duct. Journal of Vibration Testing and System Dynamics,, 3. pp. 25-37. ISSN 2475-482X

Banerjee, Sayak and Balusamy, Saravanan and Sahu, Kirti Chandra and et al, . (2019) Evaporation of ethanol-water sessile droplet on an inclined substrate at an elevated temperature. In: 72nd Annual Meeting of the APS Division of Fluid Dynamics, 23–26 November 2019, Seattle, Washington.

Bhagat, A and Gijare, H and Dongari, Nishanth (2019) Modeling of Knudsen Layer Effects in the Micro-Scale Backward-Facing Step in the Slip Flow Regime. Micromachines, 10 (2). pp. 1-15. ISSN 2072-666X

Bhagat, Apurva and Gijare, Harshal and Dongari, Nishanth (2019) Implementation of Knudsen Layer Phenomena in Rarefied High-Speed Gas Flows. Journal of Aerospace Engineering, 32 (6). 04019100. ISSN 0893-1321

Bhagat, Apurva and Gijare, Harshal and Dongari, Nishanth (2019) Modeling of a reaction control jet interacting with high-speed cross-flow in slip flow regime. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering. 095441001983690. ISSN 0954-4100

Bhagat, Apurva and Gijare, Harshal and Dongari, Nishanth (2019) Numerical modeling of Knudsen layer effects in high-speed microscale gas flows. In: 31st International Symposium on Rarefied Gas Dynamics, RGD, 23-27 July 2018, University of Strathclyde Glasgow, United Kingdom.

Bharti, Mohit and Kolhe, Pankaj (2019) Spray Characterization of twin-fluid atomizer using Phase Doppler Particle Analyzer. Masters thesis, Indian institute of technology Hyderabad.

Bhupendrakumar, Joshi Vasu and Kumar, R Prasanth (2019) Design and implementation of vacuum-cleaning mechanism on a multi-rotor. Masters thesis, Indian institute of technology Hyderabad.

Biswal, Abinash and Kale, Rakesh and Balusamy, Saravanan and Banerjee, Raja and Kolhe, Pankaj (2019) Lemon peel oil as an alternative fuel for GDI engines: A spray characterization perspective. Renewable Energy. ISSN 09601481

Bragadeshwaran, Ashok and Kasianantham, Nanthagopal and Anand, Vivek and K M, Aravind and A K, Jeevanantham and B, Saravanan (2019) Effects of n-octanol as a fuel blend with biodiesel on diesel engine characteristics. Fuel, 235. pp. 363-373. ISSN 00162361

Bragadeshwaran, Ashok and Kasianantham, Nanthagopal and B, Saravanan and Azad, Kalam and Patel, Deepam and B, Sudarshan and Aaditya Ramasamy, R (2019) Study on isobutanol and Calophyllum inophyllum biodiesel as a partial replacement in CI engine applications. Fuel, 235. pp. 984-994. ISSN 0016-2361

C

Chakraborty, Sayan and Kandala, Shanti Swaroop and Vyasarayani, C P (2019) Reduced ordered modelling of time delay systems using galerkin approximations and eigenvalue decomposition. International Journal of Dynamics and Control, 7 (3). pp. 1065-1083. ISSN 2195-268X

Chaudhary, Amit and Ramesh, Chiranthan and Chinthapenta, Viswanath and et al, . (2019) Tool Durability and Weldability in Hybrid Friction Stir Welding of High-Strength Materials. In: Advances in Computational Methods in Manufacturing. Springer, Singapore, pp. 145-152.

D

Dey, Mohar and Vivek, Atul S and Dixit, Harish Nagaraj and Richhariya, Ashutosh and Feng, James J (2019) A model of tear-film breakup with continuous mucin concentration and viscosity profiles. Journal of Fluid Mechanics, 858. pp. 352-376. ISSN 0022-1120

Dhanjal, Rishipal Singh and Raju, Gangadharan (2019) Design and fabrication of automated tape laying placement head for composite manufacturing. Masters thesis, Indian institute of technology Hyderabad.

Dixit, Harish Nagaraj (2019) On the role of variable surface viscosity in free viscous films. arXiv.

Dixit, Rahul and Kumar, R Prasanth (2019) Cable Stiffened Flexible Link Manipulator: Theory and Experiments. PhD thesis, Indian institute of technology Hyderabad.

Dongari, Nishanth (2019) IIT- Incubated startup set to launch electric two-wheelers. The Hindu.

Dongari, Nishanth (2019) IIT- Incubated startup set to launch electric two-wheelers. EEnadu.

Dongari, Nishanth (2019) IIT- Incubated startup set to launch electric two-wheelers. Times of India.

Dongari, Nishanth (2019) IIT- incubated startup set to launch electric two-wheelers. EEnadu.

Dongari, Nishanth (2019) IIT-incubated startup set to launch electric two-wheelers. [Video]

Dongri, Karthik and Kolanu, Naresh Reddy and Varaprasad, K and Raju, Gangadharan (2019) Experimental and numerical studies on the damage behavior of open hole CFRP composite specimen subjected to compression.

E

Erravelly, Indrasena Reddy and Pandey, Ashok Kumar (2019) Frequency analysis of microbeams with axial pretension. Masters thesis, Indian institute of technology Hyderabad.

G

Gajbhiye, Narendra Laxman and Eswaran, Vinayak (2019) Effect of radial magnetic field on the natural convection in a semi-circular curved enclosure for different aspect ratios. Sadhana, 44 (4). ISSN 0256-2499

Gangele, Aparna and Pandey, Ashok Kumar (2019) Frequency analysis of carbon and silicon nanosheet with surface effects. Applied Mathematical Modelling, 76. pp. 741-758. ISSN 0307904X

Gangele, Aparna and Pandey, Ashok Kumar (2019) Static and Dynamic Characteristics of Nano and Microstructures. PhD thesis, Indian institute of technology Hyderabad.

Gangele, Aparna and Sharma, Chandra Shekhar and Pal, Prem and et al, . (2019) Frequency analysis of hexagonal microbeam with 2D nanofiber mat. Materials Research Express, 6 (8). 085631. ISSN 2053-1591

Ganji, Chetan and Kumar, R Prasanth (2019) A WEARABLE ARM ORTHOSIS FOR PASSIVE GRAVITY COMPENSATION TO SUPPORT HUMAN ARM REHABILITATION. Masters thesis, Indian institute of technology Hyderabad.

Gijare, H and Bhagat, A and Dongari, Nishanth (2019) Numerical investigation of a chemically reacting and rarefied hypersonic flow field. Shock Waves. pp. 1-15. ISSN 0938-1287

Gijare, Harshal and Bhagat, Apurva and Dongari, Nishanth (2019) Effect of Knudsen Layer on the heat transfer in hypersonic rarefied gas flows. International Journal of Thermal Sciences, 142. pp. 134-141. ISSN 12900729

Gijare, Harshal and Bhagat, Apurva and Dongari, Nishanth (2019) The effect of Knudsen layer on rarefied hypersonic gas flows. In: AIP Conference Proceedings, 2019.

Goka, Suresh and S, Suryakumar (2019) Thermo-Mechanical Analysis and Characterization of Wire Arc Additive Manufactured Components. PhD thesis, Indian institute of technology Hyderabad.

Gurrala, Pradeep and Katre, Pallavi and Balusamy, Saravanan and et al, . (2019) Effect of substrate temperature on evaporation of ethanol-water sessile droplet. In: Proceedings of the 16th Asian Congress of Fluid Mechanics, 13-17 December 2019, Bengaluru, India.

H

Hemanth, Mutyala and Kumar, R Prasanth (2019) Development of Self Balancing Autonomous Bicycle. Masters thesis, Indian institute of technology Hyderabad.

Hoskoti, Lokanna and Misra, Ajay and M S, Mahesh (2019) Lock-In Phenomenon of a Pitching and Plunging Airfoil. In: AIAA Scitech, 7-11 January 2019, San Diego, California.

J

Jade, Nagaraja and Balide, Venkatesham (2019) Effect of a joint on breakout noise characteristics of rectangular duct. Building Acoustics. 1351010X1985702. ISSN 1351-010X

Joshi, Amit and Eswaran, Vinayak (2019) Implementation of a Generalized Wall Function for the Spalart Allmaras Turbulence Model. Masters thesis, Indian institute of technology Hyderabad.

Joshi, Amit and Nived, M R and Eswaran, Vinayak and et al, . (2019) A generalised wall function including compressibility and pressure-gradient terms for the Spalart–Allmaras turbulence model. Journal of Turbulence, 20 (10). pp. 626-660. ISSN 1468-5248 (In Press)

Joshi, Vishwas and Khaderi, Syed Nizamuddin (2019) Modelling and Analysis of Magnetosensitive Elastomers. Masters thesis, Indian institute of technology Hyderabad.

K

Kala, Shivaprasad and B, Venkatesham (2019) Effect of Membrane Flexibility on Acoustic Properties in Periodic Structures. Masters thesis, Indian institute of technology Hyderabad.

Kale, Rakesh and Banerjee, Raja (2019) Experimental investigation on GDI spray behavior of isooctane and alcohols at elevated pressure and temperature conditions. Fuel, 236. pp. 1-12. ISSN 0016-2361

Kale, Rakesh and Banerjee, Raja (2019) Understanding GDI Spray Characteristics of Isooctane and Alcohols and its Effect on In-cylinder Combustion. PhD thesis, Indian institute of technology Hyderabad.

Kale, Rakesh and Banerjee, Raja (2019) Understanding spray and atomization characteristics of butanol isomers and isooctane under engine like hot injector body conditions. Fuel, 237. pp. 191-201. ISSN 00162361

Kalkote, Nikhil Narayan and Assam, Ashwani and Nived, M R and Eswaran, Vinayak (2019) Investigation of All-Speed SLAU Scheme in Incompressible Limit. In: Fifth International Conference on Computational Methods for Thermal Problems, 9-11 July 2018, Indian Institute of Science, Bangalore, India.

Kambam, Dharma Teja (2019) HYPER VELOCITY OBLIQUE IMPACT OF SPHERICAL PROJECTILE ON THIN WALLED TARGET. Masters thesis, Indian institute of technology Hyderabad.

Kandala, Shanti Swaroop and Chakraborty, S and Vyasarayani, C P (2019) Comparing method of receptances and optimization-based techniques for pole placement of time-delayed systems. In: 5th Indian Control Conference, ICC, 9-11 January 2019, Delhi, India.

Kandala, Shanti Swaroop and Uchida, Thomas K and Vyasarayani, C P (2019) Pole placement for time-delayed systems using Galerkin approximations. Journal of Dynamic Systems, Measurement, and Control. ISSN 0022-0434

Kandala, Shanti Swaroop and Vyasarayani, C P (2019) Pole Placement and Reduced-Order Modelling for Time-Delayed Systems Using Galerkin Approximations. PhD thesis, Indian Institute of Technology Hyderabad.

Kant, K and Kumar, M and Banerjee, Raja and Mangadody, Narasimha and et al, . (2019) Numerical study of primary jet breakup in a simplex swirl atomizer using dual grid coupled level set Vof method. In: ASME 2019 Gas Turbine India Conference, GTINDIA, 5-6 December 2019, Tamil Nadu, India.

Karthik, Dongri and M, Ramji (2019) A comprehensive study on failure of the adhesively bonded CFRP joints using cohesive zone modeling. Masters thesis, Indian institute of technology Hyderabad.

Katiyar, Rajat Kumar and Karri, Badarinath (2019) Experimental Study of the Dynamics of Upward Propelled Droplets. Masters thesis, Indian institute of technology Hyderabad.

Kaveenraj, H and Venkatasubbaiah, K (2019) Hybrid RANS/LES of Turbulent forced convection flow over tandem square cylinders. Masters thesis, Indian institute of technology Hyderabad.

Khaderi, Syed Nizamuddin and Kumar, Nitish and Rao, Koka Tirumala (2019) Impact on auxetic and metal foams. Vibroengineering PROCEDIA, 29. pp. 255-259. ISSN 2345-0533

Kochar, Prashant and Sharma, Abhay and Suga, Tetsuo and et al, . (2019) Prediction and Control of Asymmetric Bead Shape in Laser-Arc Hybrid Fillet-Lap Joints in Sheet Metal Welds. Lasers in Manufacturing and Materials Processing, 6 (1). pp. 67-84. ISSN 2196-7229

Kolanu, Naresh Reddy and Tripathy, Swaraj Kumar and Raju, Gangadharan (2019) Linear Least Square Approach for the Estimation of Crack Tip Fracture Parameters Using Isopachic Data from Thermoelastic Stress Analysis. Transactions of the Indian Institute of Metals. ISSN 0972-2815

Kolhe, Pankaj and Kirar, Pavan Kumar and Sahu, Kirti Chandra (2019) Coalescence dynamics of a droplet on a heated pool. In: 72nd Annual Meeting of the APS Division of Fluid Dynamics, 23–26 November 2019, Seattle, Washington.

Kotturu, Sridath and Chinthapenta, Viswanath (2019) Friction Stir Processing on Two Overlapping (side by side) Metal Beads of Wire Arc Additive Manufacturing. Masters thesis, Indian institute of technology Hyderabad.

Krishna, P Murali and Kumar, R Prasanth (2019) Passive Dynamic Bounding Control using Symmetry Condition Control Laws. IJSRSET, 6. pp. 451-457. ISSN 2394-4099

Kumar, Ashutosh and Eswaran, Vinayak (2019) Aerodynamic Investigation of k − kL Turbulence Model. Masters thesis, Indian institute of technology Hyderabad.

L

Lingam, R and Reddy, N Venkata (2019) TOOL PATH GENERATION SYSTEM FOR DOUBLE SIDED INCREMENTAL FORMING. PhD thesis, Indian institute of technology Hyderabad.

Lobo, Clarence F and Akiwate, Deepak C and Balide, Venkatesham and et al, . (2019) A Performance Study on Indirect Static Flow Resistivity Measurement Methods for Acoustic Materials. NOISE Theory and Practice. ISSN 2412-8627

M

Maloth, Ganesh and Venkatasubbaiah, K (2019) Two-Phase Analysis of Nanofluid Flow Through A Channel With Heat Transfer. Masters thesis, Indian institute of technology Hyderabad.

Mathews, Jobin T and M, Ramji and Khaderi, Syed Nizamuddin (2019) Numerical evaluation of the interaction of rigid line inclusions using strain intensity factors. International Journal of Mechanical Sciences. ISSN 0020-7403 (In Press)

Matta, Seshadri and Kolanu, Naresh Reddy and Chinthapenta, Viswanath and Manjunatha, C M and M, Ramji (2019) Progressive damage analysis of adhesively bonded patch repaired carbon fibre–reinforced polymer specimen under compression involving cohesive zone model. International Journal of Damage Mechanics. ISSN 1056-7895

Michael, E and Keerthi, S K and Kolhe, Pankaj and et al, . (2019) Effect of liquid/gas density ratio on primary jet breakup of pressure swirl atomizer: Experimental & numerical study. In: ASME 2019 Gas Turbine India Conference, GTINDIA, 5-6 December 2019, Tamil Nadu, India.

Mohan, Shashi Ranjan and S, Suryakumar (2019) Adopting feature resolution and material distribution constraints into topology optimisation of additive manufacturing components. Virtual and Physical Prototyping, 14 (1). ISSN 1745-2759

Mohan, Shashi Ranjan and S, Suryakumar (2019) Adopting feature resolution and material distribution constraints into topology optimisation of additive manufacturing components. Virtual and Physical Prototyping, 14 (1). pp. 79-91. ISSN 1745-2759

Mujeeb, Shaik and Karri, Badarinath (2019) Experimental Validation of Composite Solid Propellant Burning Rate Prediction Model (He-Qu-1D) using Ultrasonic Burning Rate (UBR). Masters thesis, Indian institute of technology Hyderabad.

Murugan, Raju and Sellan, Dhanalakshmi and Kolhe, Pankaj (2019) Experimental investigation of flow blurring atomizer at near field using particle image velocimetry. In: ASME 2019 Gas Turbine India Conference, GTINDIA, 5-6 December 2019, Tamil Nadu, India.

Murugan, Raju and Sellan, Dhanalakshmi and Kolhe, Pankaj (2019) Experimental study of flow field effect on spray and flame structure in swirl stabilized combustor. In: ASME 2019 Gas Turbine India Conference, GTINDIA, 5-6 December 2019, Tamil Nadu, India.

N

N, Satish and K, Venkatasubbaiah (2019) Numerical investigations of flow and heat transfer characteristics between turbulent double jet impingement and a moving plate. Journal of Thermal Science and Engineering Applications. ISSN 1948-5085

Nair, Amal M and Muvvala, Gopinath and Nath, Ashish Kumar (2019) A study on in-situ synthesis of TiCN metal matrix composite coating on Ti–6Al–4V by laser surface alloying process. Journal of Alloys and Compounds, 810. p. 151901. ISSN 09258388

Nanthagopal, K and Ashok, B and B, Saravanan and M, Ramesh Pathy and G, Sahil and A, Ramesh and Md, Nurun Nabi and Mpohammed, Golam Rasul (2019) Study on decanol and Calophyllum Inophyllum biodiesel as ternary blends in CI engine. Fuel, 239. pp. 862-873. ISSN 0016-2361

P

Panchasara, Heena and Kolhe, Pankaj and Agrawal, Ajay K (2019) Spray Flame Characteristics of Bio-Derived Fuels in a Simulated Gas Turbine Burner. In: ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition, GT, 17-21 June 2019, Phoenix, United States.

Pandey, Pushkar Kumar and Suryakumar, S (2019) Manufacturing of Large Metallic Components through Wire and Arc Additive Manufacturing(WAAM). Masters thesis, Indian institute of technology Hyderabad.

Pawar, Vishal and Pandey, Ashok Kumar (2019) Modeling and Analysis of Fabrication Defects in MEMS based Comb Actuators. Masters thesis, Indian institute of technology Hyderabad.

Peddiraju, Vivek Chaitanya and Suryakumar, S and Chatterjee, Subhradeep and et al, . (2019) Weld deposition of nickel on titanium for surface hardening with Ti-Ni-based intermetallic compounds. In: International Conference on Materials and Manufacturing Methods (3M ), 5-7 July 2019, Trichy, India. (In Press)

Pegallapati, Abhijith and Raju, Gangadharan (2019) Development of Finite Element Model based on Carrera Unified Formulation for Laminated Composites. Masters thesis, Indian institute of technology Hyderabad.

Pillarisetti, Lalith Sai Srinivas and Talreja, Ramesh (2019) On quantifying damage severity in composite materials by an ultrasonic method. Composite Structures, 216. pp. 213-221. ISSN 0263-8223

R

Raut, Harshal Suresh and Dixit, Harish Nagaraj (2019) Vortex shedding patterns in flow past a streamwise oscillating square cylinder at low Reynolds number using dynamic meshing. Physics of Fluids, 31 (11). p. 113605. ISSN 1070-6631

Ravi, Vadthyavath and Raju, Gangadharan (2019) Impact Damage Assessment in CFRP laminates using Phased Array Ultrasonics. Masters thesis, Indian institute of technology Hyderabad.

Razdan, Sanket and Dongari, Nishanth (2019) Numerical Analysis of Hypersonic Flow Coupled with Radiation around Blunt-Nosed Models. Masters thesis, Indian institute of technology Hyderabad.

Reddy, G D (2019) A class of parameter choice rules for stationary iterated weighted Tikhonov regularization scheme. Applied Mathematics and Computation, 347. pp. 464-476. ISSN 0096-3003

Reddy, V R K and Subbiah, M (2019) On Neutral and Unstable Modes and on the Role of Reynolds Stress in the Stability Problem of Density Stratified Shear Flows in Channels with Variable Bottom. Proceedings of the National Academy of Sciences, India Section A: Physical Sciences, 89 (4). pp. 777-790. ISSN 0369-8203

Ruikar, Mandar and Dongari, Nishanth (2019) Numerical Analysis of a Scramjet Inlet using OpenFOAM. Masters thesis, Indian institute of technology Hyderabad.

S

S, Suryakumar and Date, Mahendra D and Balide, Venkatesham and et al, . (2019) Acoustic measurement of additive manufactured concentric tube reverse flow resonators. Mechanics of Advanced Materials and Structures, 26 (1). pp. 56-61. ISSN 1537-6494

Samukham, Surya and Raju, Gangadharan and Vyasarayani, C P and Weaver, Paul M (2019) Dynamic instability of curved variable angle tow composite panel under axial compression. Thin-Walled Structures, 138. pp. 302-312. ISSN 0263-8231

Samukham, Surya and Raju, Gangadharan and Wu, Zhangming and Vyasarayani, C P (2019) Dynamic instability analysis of variable angle tow composite plate with delamination around a cut-out. Mechanics of Advanced Materials and Structures, 26 (1). pp. 62-70. ISSN 1537-6494

Samukham, Surya and Vyasarayani, C P (2019) Parametric instabilities in variable angle tow composite panels. PhD thesis, Indian Institute of Technology Hyderabad.

Saritha, G and Banerjee, Raja (2019) Development and application of a high density ratio pseudopotential based two-phase LBM solver to study cavitating bubble dynamics in pressure driven channel flow at low Reynolds number. European Journal of Mechanics, B/Fluids, 75. pp. 83-96. ISSN 0997-7546

Satish, N and Venkatasubbaiah, K (2019) Numerical investigations of turbulent multiple jet impingement on a heated square block in a confined channel. Thermal Science and Engineering Progress. p. 100415. ISSN 24519049 (In Press)

Saxena, Prashant and Reddy, N H and Pradhan, S P (2019) Analysis of Instabilities in the Deformation of Magnetoelastic Membranes. In: 4th Indian Conference on Applied Mechanics, 3-5 July 2019, Bangalore, India.

Saxena, Prashant and Reddy, Narravula Harshavardhan and Pradhan, Satya Prakash (2019) Magnetoelastic deformation of a circular membrane: Wrinkling and limit point instabilities. International Journal of Non-Linear Mechanics, 116. pp. 250-261. ISSN 00207462

Singh, Saurabh and Reddy, N Venkata (2019) Electric Pulse Aided Draw Bending. Masters thesis, Indian institute of technology Hyderabad.

Sunkari, Upender and Chatterjee, Subhradeep and Bhattacharjee, Pinaki Prasad and et al, . (2019) Microstructure and properties of intermetallic strengthened CoCrFeNi2.1Nbx high entropy alloys. In: Proceedings Intermetallics, 2019, Bad Staffelstein, Germany.

T

Tamboli, Nikhil Kumar and Balusamy, Saravanan (2019) Experimental and Numerical Investigation into Buoyancy Induced Instabilities in Laminar Methane Diffusion Flame. Masters thesis, Indian institute of technology Hyderabad.

Teja, Golakoti Ravi and Balusamy, Saravanan (2019) AN EXPERIMENTAL STUDY OF LEMON PEEL OIL/GASOLINE BLEND IN A PFI ENGINE. Masters thesis, Indian institute of technology Hyderabad.

Tripathi, Manish and M S, Mahesh and Misra, Ajay (2019) Flow Field Characterization and Visualization of Grid Fin Subsonic Flow. Journal of Fluids Engineering, 141 (10). p. 101401. ISSN 0098-2202

Tripathi, Manish and Misra, Ajay and M S, Mahesh (2019) Effect of Planar Member Cross-Section on Cascade Fin Aerodynamics. Journal of Spacecraft and Rockets, 56 (3). pp. 744-760. ISSN 0022-4650

V

Varma, R Mahesh and Reddy, N Venkata (2019) Studies on Extrusion – Based Additive Manufacturing of Poly-Ether-Ether-Keton (PEEK). Masters thesis, Indian institute of technology Hyderabad.

Vemula, N V Prasanth and Dixit, Harish Nagaraj (2019) Finite Element Modeling of Multiphase Flows using Arbitrary Lagrangian Eulerian Approach. Masters thesis, Indian institute of technology Hyderabad.

Vyasarayani, C P and Manikantan, R and Chakraborty, Sayan (2019) Unknown input reconstruction in non-linear dynamical systems using homotopy optimization. Vibroengineering PROCEDIA, 29. pp. 279-284. ISSN 2345-0533

Vyasarayani, C P and Samukham, Surya and Khaderi, Syed Nizamuddin (2019) Nonsmooth modeling of distributed impacts in spatially discretized continuous structures using the Ivanov transformation. arXiv.org.

Vyasarayani, Chandrika Prakash and Chakraborty, Sayan and Kandala, Shanti Swaroop (2019) Comparing method of receptances and optimization-based techniques for pole placement of time-delayed systems. In: Indian Control Conference (ICC), 9-11 January 2019, IIT Delhi,India.

Y

Yoganandh, Madhuranthkam and Nagaraja, Jade and Balide, Venkatesham (2019) Prediction of insertion loss of lagging in rectangular duct using statistical energy analysis. Noise Control Engineering Journal, 67 (6). pp. 438-446. ISSN 0736-2501

This list was generated on Thu Mar 28 19:06:07 2024 IST.