Items where Subject is "Materials Engineering > Materials engineering"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: A | B | C | D | E | G | H | I | J | K | L | M | N | P | R | S | T | U | V | W | Y | Z
Number of items at this level: 283.

A

Adepu, S and Gaydhane, M K and Kakunuri, M and Sharma, Chandra Shekhar and Khandelwal, Mudrika and Eichhorn, S J (2017) Effect of micropatterning induced surface hydrophobicity on drug release from electrospun cellulose acetate nanofibers. Applied Surface Science. ISSN 0169-4332 (In Press)

Adepu, Shivakalyani and Khandelwal, Mudrika (2017) Broad-spectrum antimicrobial activity of bacterial cellulose silver nanocomposites with sustained release. Journal of Materials Science. pp. 1-14. ISSN 0022-2461 (In Press)

Ahmed, M Z (2014) Evolution of Microstructure and Crystallographic Texture during Thermo-Mechanical Processing by Warm-rolling In A Duplex Stainless Steel. PhD thesis, Indian Institute of Technology Hyderabad.

Ahmed, M Z and Bhattacharjee, Pinaki Prasad (2015) Evolution of microstructure and texture during isothermal annealing of a heavily warm-rolled duplex steel. Isij International, 54 (12). pp. 2844-2853. ISSN 0915-1559

Ahmed, M Z and Bhattacharjee, Pinaki Prasad (2016) Microstructure, Texture, and Tensile Properties of a Severely Warm-Rolled and Annealed Duplex Stainless Steel. Steel Research International, 87 (4). pp. 472-483. ISSN 1611-3683

Akkisetty, B (2014) Molybdenum Oxide and Tin Oxide/Sulfide Nanostructured Materials for Anodes in Lithium Ion Batteries. PhD thesis, Indian Institute of Technology, Hyderabad.

Anand, D and Khandelwal, Mudrika (2015) Novel conducting paper from bacterial cellulose and poly aniline. Project Report. Technical volume in 29th Engineering Congress, Hyderabad under the sub-theme “Manufacturing” Technical Session V, Hyderabad.

Anand, D and Khandelwal, Mudrika (2015) Route to conducting nanocomposites by simultaneous in situ polymerization of aniline and matrix assembly from bacterial cellulose nanowhiskers. Project Report. International Conference "Plast India-2015", Gandhinagar.

Anand, Divya and Khandelwal, Mudrika (2015) Conducting flexible paper based on Bacterial cellulose and Polyaniline composites. Masters thesis, Indian Institute of Technology Hyderabad.

Anbarasu, V and Manigandan, A and Karthik, T and Sivakumar, K (2012) Inducing multiferroic behaviour in the diamagnetic Y2O3 system. Journal of Materials Science-Materials in Electronics, 23 (6). pp. 1201-1209. ISSN 0957-4522

Asgar, J and Lingam, R and Reddy, V N (2013) Tool path influence on electric pulse aided deformation during incremental sheet metal forming. In: The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, 6–10 January 2014, Melbourne, Australia.

B

B, Mallesham and B, Viswanath and Ramadurai, Ranjit (2016) Effect of crystal structure and cationic order on phonon modes across ferroelectric phase transformation in Pb(Fe0.5-xScxNb0.5)O3 bulk ceramics. AIP Advances, 6 (1). pp. 1-8. ISSN 2158-3226

B, Santhosh and Chatterjee, Subhradeep (2018) Recyclability of Mixed Maraging and Stainless Steel Scraps. Masters thesis, Indian Institute of Technology Hyderabad.

Bandi, Mallesham (2017) Structure, Cation Ordering and Phonon studies of Pb(Fe 0.5-x Sc x Nb 0.5 )O 3 , a Multiferroic Relaxor : Bulk and Thin Films. PhD thesis, Indian Institute of Technology Hyderabad.

Bandyopadhyay, Soumya and Jogi, Tushar and Miriyala, Kumaraswamy and Ramadurai, Ranjit and Bhattacharya, Saswata (2016) A phase-field study of domain dynamics in ferroelectric BCT-BZT system. MRS Advances, 1 (40). pp. 2783-2788. ISSN 2059-8521

Basanth Kumar, K and Saxena, Kuldeep K and Dey, Suhash Ranjan and Pancholi, Vivek and Bhattacharjee, Amit (2017) Peak stress studies of hot compressed TiHy 600 alloy. Materials Today: Proceedings, 4 (8). pp. 7365-7374. ISSN 2214-7853

Bhadak, B V (2014) Electron Back Scattered Diffraction Study of Deformation and Recrystallization Textures of Constituent Phases in a Ferritic-ustenitic Duplex Steel. Masters thesis, Indian Institute of Technology, Hyderabad.

Bhagath Singh, G V P and K V L, Subramaniam and Biernack, J (2017) Method for Direct Determination of Glassy Phase Dissolution in Hydrating Fly Ash-Cement System Using X-ray Diffraction. Journal of the American Ceramic Society, 100 (1). pp. 403-412. ISSN 0002-7820

Bhattacharjee, P P and Joshi, M and Chaudhary, V P and Gatti, J R and Zaid, M (2013) Texture evolution during cross rolling and annealing of high-purity nickel. Metallurgical and Materials Transactions A, 44 (6). pp. 2707-2716. ISSN 1073-5623

Bhattacharjee, P P and Sathiaraj, G D and Zaid, M and Gatti, J R and Lee, C and Tsai, C W and Yeh, J W (2014) Microstructure and texture evolution during annealing of equiatomic CoCrFeMnNi high-entropy alloy. Journal of Alloys and Compounds, 587. pp. 544-552. ISSN 0925-8388

Bhattacharjee, P P and Takatsuji, Y and Miyajima, Y and Terada, D and Tsuji, N (2013) Recrystallization Texture of Heavily Cold Rolled Polycrystalline Nickel Sheets With and Without Strong Starting Cube Texture. In: 5th International Conference on Recrystallization and Grain Growth, ReX and GG 2013, 5-10, May 2013, Sydney, NSW; Australia.

Bhattacharjee, P P and Zaid, M and Sathiaraj, G D and Bhadak, B (2014) Evolution of Microstructure and Texture during Warm Rolling Of a Duplex Steel. Metallurgical and Materials Transactions A, 45 (4). pp. 2180-2191. ISSN 1073-5623

Bhattacharjee, Pinaki Prasad and Joshi, M and Chaudhary, V P and Zaid, M (2013) The Effect of Starting Grain Size on the Evolution of Microstructure and Texture in Nickel during Processing by Cross-Rolling. Materials Characterization, 76. pp. 21-27. ISSN 1044-5803

Bhattacharjee, Pinaki Prasad and Ray, R K and Tsuji, N (2010) Evolution of deformation and recrystallization textures in high-purity Ni and the Ni-5 at. pct W alloy. Metallurgical and Materials Transactions A, 41 (11). pp. 2856-2870. ISSN 1073-5623

Bhattacharjee, Pinaki Prasad and Saha, S and Gatti, J R (2014) Effect of change in strain path during cold rolling on the evolution of microstructure and texture in Al and Al-2.5%Mg. Journal of Materials Engineering and Performance, 23 (2). pp. 458-468. ISSN 1059-9495

Bhattacharjee, Pinaki Prasad and Takatsuji, Y and Miyajima, Y and Terada, D and Tsuji, N (2012) Evolution of microstructure and texture during cold rolling and annealing of a highly cube-textured ({001}(100)) polycrystalline nickel sheet. Metallurgical and Materials Transactions A, 43 (7). pp. 2442-2452. ISSN 1073-5623

Bhattacharjee, Pinaki Prasad and Tsuji, N (2011) Development of highly cube textured nickel superconductor substrate tapes by accumulative roll bonding (ARB). International Journal of Materials Research, 102 (2). pp. 173-182. ISSN 1862-5282

Bhattacharjee, Pinaki Prasad and Tsuji, N (2011) Development of textured coated superconductor substrate tapes by severe plastic deformation processing. In: 5th International Conference on Nanomaterials by Severe Plastic Deformation, NanoSPD5, 21-25, March 2011, Nanjing; China.

Bhattacharjee, Pinaki Prasad and Tsuji, N (2012) Effect of ultrahigh straining on the evolution of cube texture ({100}<100>) in high purity nickel. In: International Conference on Textures of Materials, 12-17, December 2011, Mumbai; India.

Bhattacharjee, Pinaki Prasad and Tsuji, N and Ray, R K (2011) Effect of initial grain size on the evolution of {001}<001> texture in severely deformed and annealed high-purity nickel. Metallurgical and Materials Transactions A, 42 (9). pp. 2769-2780. ISSN 1073-5623

Bhattacharjee, T and Zheng, R and Chong, Y and Sheikh, S and Guo, S and Clark, I T and Okawa, T and Wani, I S and Bhattacharjee, Pinaki Prasad and Shibata, A and Tsuji, N (2017) Effect of low temperature on tensile properties of AlCoCrFeNi2.1 eutectic high entropy alloy. Materials Chemistry and Physics. ISSN 0254-0584 (In Press)

Bhattacharya, Saswata and Bandyopadhyay, S and Choudhury, A (2016) Phase-field modeling of electrochemical phenomena. Journal of the Indian Institute of Science, 96 (3). pp. 257-268. ISSN 0970-4140

Bodapati, Bolla Reddy and Bhattacharjee, Pinaki Prasad (2019) Uniaxial compression and spherical indentation behavior of porous copper. PhD thesis, Indian institute of technology Hyderabad.

Bruyer, E. and Sayede, A. and Ramadurai, Ranjit and et al, . (2015) Insight on the ferroelectric properties in a (BiFeO3)2(SrTiO3)4 superlattice from experiment and ab initio calculations. Applied Physics Letters, 107 (4). 042904. ISSN 0003-6951

C

C, Elango (2013) Effect of Stacking Fault Energy on Microstructure and Texture Evolution in Ni-Co Alloys during Severe Plastic Deformation by High Pressure Torsion. Masters thesis, Indian Institute of Technology Hyderabad.

Cao, Y and Bhattacharya, Saswata and Shen, J and Randall, C A and Chen, L Q (2013) Role of polaron hopping in leakage current behavior of a SrTiO3 single crystal. Journal of Applied Physics, 114 (22). pp. 1-7. ISSN 0021-8979

Chadha, Kanwal (2013) The Effect of Strain Reversal during High Pressure Torsion on the Evolution of Microstructure, Texture and Hardness Properties of Aluminum Alloys. Masters thesis, Indian Institute of Technology Hyderabad.

Chadha, Kanwal and Shahriari, D and Tremblay, R and Bhattacharjee, Pinaki Prasad and Jahazi, M (2017) Deformation and Recrystallization Behavior of the Cast Structure in Large Size, High Strength Steel Ingots: Experimentation and Modeling. Metallurgical and Materials Transactions A, 48 (9). pp. 4297-4313. ISSN 1073-5623

Chandrakant, Chandrakant and Panigrahi, Bharat Bhooshan (2019) Electro-Spark Coating of High Entropy Alloys on AISI 410 Stainless Steel Substrates to Improve the Surface Properties and Wear Resistance. Masters thesis, Indian institute of technology Hyderabad.

Chatterjee, Sourav and Bhattacharjee, Pinaki Prasad and Butterfoss, Glenn L and et al, . (2019) Establishment of atropisomerism in 3-indolyl furanoids: a synthetic, experimental and theoretical perspective. RSC Advances, 9 (39). pp. 22384-22388. ISSN 2046-2069

Chatterjee, Subhradeep and Abinandanan, T A and Reddy, G M and Chattopadhyay, K (2016) Microstructure Formation in Dissimilar Metal Welds: Electron Beam Welding of Ti/Ni. Metallurgical and Materials Transactions A, 47 (2). pp. 769-776. ISSN 1073-5623

Chaudhari, S and Kannan, P K and Dey, Suhash Ranjan (2016) Effects of triethanolamine on the formation of CZTS films using a simple dip coating technique. In: IEEE 43rdPhotovoltaic Specialists Conference (PVSC), 5-10 June 2016.

Chaudhari, S and Kannan, P K and Dey, Suhash Ranjan (2017) Influence of stabilizing agent on dip coating of Cu 2 ZnSnS 4 thin film. Thin Solid Films, 636. pp. 144-149. ISSN 0040-6090

Chaudhari, S and Kannan, P K and Dey, Suhash Ranjan (2016) Investigation of optimum annealing parameters for formation of dip coated Cu2ZnSnS4 thin film. Thin Solid Films, 612. pp. 456-462. ISSN 0040-6090

Chaudhari, S and Palli, S and Kannan, P K and Dey, Suhash Ranjan (2016) Pulsed electrodeposition of Cu2ZnSnS4 absorber layer precursor for photovoltaic application. Thin Solid Films, 600. pp. 169-174. ISSN 0040-6090

Chaudhari, Sushmita and Dey, Suhash Ranjan (2018) Dip coating of Cu2ZnSn(SxSe1-x)4 Absorber Layer for Solar Photovoltaic Applications. PhD thesis, Indian Institute of Technology Hyderabad.

Chaudhari, Sushmita and Kannan, P K and Dey, Suhash Ranjan (2019) Effect of Annealing Atmosphere and Stabilizing Agent on the Formation of CZTS Film Using a Simple Dip Coating Technique. In: 32nd European Photovoltaic Solar Energy Conference and Exhibition, 20-24 June 2016, Munich, Germany.

Chaudhary, Vijay Prakash and Bhattacharjee, Pinaki Prasad (2012) Effect of Change in Strain Path During Cold Rolling on the Evolution of Microstructure, Texture And Hardness Properties of Nickel With Extremely Coarse Initial Grain Size. Masters thesis, Indian Institute of Technology Hyderabad.

Chen, L and Chen, J and Lebensohn, R A and Yi, Y Z and Heo, T W and Bhattacharjee, S and Chang, K and Mathaudhu, S and Liu, Z K and Chen, L Q (2015) An integrated fast Fourier transform-based phase-field and crystal plasticity approach to model recrystallization of three dimensional polycrystals. Computer Methods in Applied Mechanics and Engineering, 285. pp. 829-848. ISSN 0045-7825

D

D, Davis and M, Srivastava and M, Malathi and Panigrahi, Bharat Bhooshan and Singh, S (2018) Effect of Cr2AlC MAX phase addition on strengthening of Ni-Mo-Al alloy coating on piston ring: Tribological and twist-fatigue life assessment. Applied Surface Science. ISSN 0169-4332 (In Press)

DESURU, SREEJAGADEESH and Chatterjee, Subhradeep (2018) Surface Alloying of Titanium with Nickel using Customized Automated GMAW process. Masters thesis, Indian Institute of Technology Hyderabad.

Das, Asim and V, Kanchana (2014) Understanding Thermoelectric Properties from Density Functional Theory. Masters thesis, Indian Institute of Technology, Hyderabad.

Das, K C and Ghosh, S P and Tripathy, N and Bose, G and Ashok, A and Pal, Prem and Kim, D H and Lee, T I and Myoung, J M and Kar, J P (2015) Surface and interface studies of RF sputtered HfO2 thin films with working pressure and gas flow ratio. Journal of Materials Science: Materials in Electronics, 26 (8). pp. 6025-6031. ISSN 0957-4522

Davis, Deepak and Shah, A Farhaan and Panigrahi, Bharat Bhooshan and Singh, Sheela (2019) Effect of Cr2AlC nanolamella addition on tribological properties of 5W-30 engine oil. Applied Surface Science. ISSN 01694332

Deshpande, Atul Suresh (2019) జీవ ఇంధనాన్నికి కొత్త ఉత్ప్రేరకం. Eenadu, Hyderabad.

Devarakonda, Damodar and Kumar, S Krishna and Martha, Surendra Kumar and Deshpande, Atul Suresh (2018) Nitrogen-doped Graphene-like Carbon Nanosheets from Commercial Glue: Morphology, Phase Evolution and Li-ion Battery Performance. Dalton Transactions. ISSN 1477-9226

Dey, S R and Hollang, L and Beausir, B and Hieckmann, E (2013) Formation of micro shear bands during cyclic deformation of sub-microcrystalline nickel. Scripta Materialia, 68 (8). pp. 631-634. ISSN 1359-6462

Dey, Suhash Ranjan and Hollang, L and Beausir, B and Hieckmann, E and Skrotzki, W (2013) Reprint of: Shear banding in sub-microcrystalline nickel at 4 K. Mechanics of Materials, 67. pp. 53-58. ISSN 0167-6636

Dhivya, Egambaram and Magadevan, Deviga and Palguna, Yasam and et al, . (2019) Synthesis of titanium based hetero MOF photocatalyst for reduction of Cr (VI) from wastewater. Journal of Environmental Chemical Engineering, 7 (4). p. 103240. ISSN 22133437

Dinesh, Dinesh and Dey, Suhash Ranjan (2019) Dip Coating of Cu2ZnSnS4 on Flexible Mo foil and its Flexibility measurements. Masters thesis, Indian institute of technology Hyderabad.

Dudala, Srinivas and Korla, Rajesh (2018) Effect of Microstructural Evolution on Flow behavior of Al0.2CoCrFeNi HEA. Masters thesis, Indian Institute of Technology Hyderabad.

Durga Rao, T and Karthik, T and Srinivas, A and Asthana, Saket (2012) Study of structural, magnetic and electrical properties on Ho-substituted BiFeO 3. Solid State Communications, 152 (23). pp. 2071-2077. ISSN 0038-1098

Durga Rao, T and Ramadurai, Ranjit and Asthana, Saket (2014) Enhanced magnetization and improved insulating character in Eu substituted BiFeO3. Journal of Applied Physics, 115 (12). ISSN 0021-8979

E

Eleti, R R and Bhattacharjee, T and Zhao, L and Bhattacharjee, Pinaki Prasad and Tsuji, N (2017) Hot Deformation behavior of CoCrFeMnNi FCC High Entropy Alloy. Materials Chemistry and Physics. ISSN 0254-0584 (In Press)

Eleti, R R and Raju, V and Veerasham, M and Reddy, S R and Bhattacharjee, Pinaki Prasad (2018) Influence of strain on the formation of cold-rolling and grain growth textures of an equiatomic HfZrTiTaNb refractory high entropy alloy. Materials Characterization, 136. pp. 286-292. ISSN 1044-5803

Eleti, Rajeshwar Reddy (2015) Hot deformation behavior of CrMnFeCoNi equiatomic FCC High Entropy Alloy. Masters thesis, Indian Institute of Technology Hyderabad.

Equbal, A (2015) Synthesis and Sintering Kinetics of Mechanically Alloyed FeCrCoMnNi High Entropy Alloy Powders. Masters thesis, Indian Institute of Technology Hyderabad.

G

G D, Sathiaraj and Bhattacharjee, Pinaki Prasad (2015) Effect of starting grain size on the evolution of microstructure and texture during thermo-mechanical processing of CoCrFeMnNi high entropy alloy. Journal of Alloys and Compounds, 647. pp. 82-96. ISSN 0925-8388

G S, Bharathi Ganesh (2017) Phase Field Modelling of Eutectoid Transformation in Fe - C Alloy System. Masters thesis, Indian Institute of Technology Hyderabad.

Ganguly, Ronit and Gunasekaran, Vijayabhaskar and Miriyala, Kumaraswamy and Bandyopadhyay, Soumya and Bhattacharya, Saswata and Acharyya, Amit and Ramadurai, Ranjit (2017) Tunable polarization components and electric field induced crystallization in polyvinylidenefluoride (PVDF); a piezo polymer. arXiv.

Gatti, J R and Bhattacharjee, P P (2014) Evolution of Microstructure and Texture during Severe Cold Rolling and Annealing Of Al-2.5%Mg and Al-2.5%Mg-0.2%Sc Alloys. In: TMS Light Metals, 16-20, February 2014, San Diego, CA; United States.

Gatti, J R and Bhattacharjee, P P (2014) Microstructure and Texture of Al-2.5wt.%Mg Processed by Combining Accumulative Roll Bonding and Conventional Rolling. Journal of Materials Engineering and Performance. 10p. ISSN 1059-9495

Gatti, J R and Bhattacharjee, Pinaki Prasad (2014) Annealing textures of severely cold and warm-rolled Al-2.5 wt.%Mg alloy. Journal of Alloys and Compounds, 615. pp. 950-961. ISSN 0925-8388

Gatti, J R and Bhattacharjee, Pinaki Prasad (2015) Effect of Prior Recovery Treatment on the Evolution of Cube Texture During Annealing of Severely Warm-Rolled Al-2.5 wt pctMg Alloy. Metallurgical and Materials Transactions A, 46 (11). pp. 4966-4977. ISSN 1073-5623

Gatti, J R and Bhattacharjee, Pinaki Prasad (2015) Evolution of microstructure and texture during annealing of Al-2.5%Mg-0.2%Sc severely deformed by a combination of accumulative roll bonding (ARB) and conventional rolling. In: 17th International Conference on Textures of Materials, 24-29 August, 2014, Dresden; Germany.

Gatti, Jagg Rao (2015) Understanding and Control of Recrystallization Texture in Severely Deformed Al – 2.5wt.%Mg Alloys. PhD thesis, Indian Institute of Technology Hyderabad.

Ghodke, S C (2013) Fabrication and Studies of Organic-Inorganic Hybrid Composites For Piezoelectric Based Vibration Sensors. Masters thesis, Indian Institute of Technology Hyderabad.

Ghosh, Subhadip and Pradeep, V N S and Muhuri, Sudipto and Pagonabarraga, Ignacio and Chaudhuri, Debasish (2017) Bidirectional motion of filaments: the role of motor proteins and passive cross linkers. Soft Matter, 13 (39). pp. 7129-7140. ISSN 1744-683X

Gottuparthi, V (2014) Studies on Structural and Physical Properties of Zr Substituted Na0.5Bi0.5TiO3 and Na0.5Bi0.5TiO3-BaTiO3 Solid Solution for Vibration Sensor Application. Masters thesis, Indian Institute of Technology, Hyderabad.

H

Hong, L and Liang, L and Bhattacharyya, Saptashwa et. al. (2016) Anisotropic Li intercalation in a LixFePO4 nano-particle: a spectral smoothed boundary phase-field model. Physical Chemistry Chemical Physics, 18 (14). pp. 9537-9543. ISSN 1463-9076

Hoskoti, Lokanna and Misra, Ajay and M S, Mahesh (2018) Frequency lock-in during vortex induced vibration of a rotating blade. Journal of Fluids and Structures, 80. pp. 145-164. ISSN 0889-9746

I

I, Srikanth (2014) Effect of Carbon nanotubes/nanofibers Reinforcement on Mechanical and Thermal Properties of CFRPs. PhD thesis, Indian Institute of Technology Hyderabad.

I, Srikanth and Kumar, Suresh and Singh, V and B, Rangababu and Ghosal, P and Ch, Subrahmanyam (2015) Effect of carbon nanofibre addition on the mechanical properties of different Vf carbon-epoxy composites. Bulletin of Materials Science, 38 (2). pp. 309-317. ISSN 0250-4707

I, Srikanth and N, Padmavathi and Kumar, Suresh and Ghosal, P and Kumar, Anil and Ch, Subrahmanyam (2013) Mechanical, thermal and ablative properties of zirconia, CNT modified carbon/phenolic composites. Composites Science and Technology, 80. pp. 1-7. ISSN 0266-3538

Illa, Mani Pujitha and Khandelwal, Mudrika and Sharma, Chandra Shekhar (2018) Bacterial cellulose-derived carbon nanofibers as anode for lithium-ion batteries. Emergent Materials. pp. 1-16. ISSN 2522-5731

Illa, Mani Pujitha and Khandelwal, Mudrika and Sharma, Chandra Shekhar (2019) Modulated Dehydration for Enhanced Anodic Performance of Bacterial Cellulose derived Carbon Nanofibers. ChemistrySelect, 4 (21). pp. 6642-6650. ISSN 2365-6549

Ishtiyak, Mohd and Jana, Subhendu and Bhattacharjee, Pinaki Prasad and Jai, Prakash et. al. (2019) Intrinsic extremely low thermal conductivity in BaIn2Te4: Synthesis, crystal structure, Raman spectroscopy, optical, and thermoelectric properties. Journal of Alloys and Compounds. ISSN 09258388

J

J R, Gatti and Bhattacharjee, Pinaki Prasad (2015) Nucleation behavior and formation of recrystallization texture in pre-recovery treated heavily cold and warm-rolled Al–2.5 wt.%Mg alloy. Materials Characterization, 106. pp. 141-151. ISSN 1044-5803

Jogi, T D (2014) Alumina Copper Composites for Thermoelectric Applications. Masters thesis, Indian Institute of Technology Hyderabad.

Jogi, T and Bhattacharya, Saswata (2016) Evolution of Interfacial Dislocation Networks in Particle-Strengthened Alloy Systems During High Temperature Creep: A Discrete Dislocation Dynamics Study. Transactions of the Indian Institute of Metals, 69 (2). pp. 507-512. ISSN 0972-2815

Jogi, Tushar and Bhattacharya, Saswata (2016) Evolution of Interfacial Dislocation Networks in Particle-Strengthened Alloy Systems During High Temperature Creep: A Discrete Dislocation Dynamics Study. In: Transactions of the Indian Institute of Metals, 2016.

Jose, M J and Kumar, S S and Sharma, Abhay (2016) Vibration assisted welding processes and their influence on quality of welds. Science and Technology of Welding and Joining, 21 (4). pp. 243-258. ISSN 1362-1718

Joshi, A M (2014) Sintering Kinetics of Cr2AlC Powder. Masters thesis, Indian Institute of Technology, Hyderabad.

Joshi, Mohit and Bhattacharjee, Pinaki Prasad (2012) Effect of Strain Path Change during Cold Rolling On the Evolution of Deformation and Recrystallization Textures of High Purity Nickel. Masters thesis, Indian Institute of Technology Hyderabad.

Jung, Minwoo and Gupta, Shourya Dutta and Dabidian, Nima and Brener, Igal and Shcherbakov, Maxim and Shvets, Gennady (2018) Polarimetry Using Graphene-Integrated Anisotropic Metasurfaces. ACS Photonics, 5 (11). pp. 4283-4288. ISSN 2330-4022

K

K, Basanth Kumar and Dey, Suhash Ranjan (2018) Thermomechanical Processing, Microstructure and Texture Studies of TiHy 600 Alloy (a Near Alpha Titanium Alloy). PhD thesis, Indian institute of technology Hyderabad.

K, Rajamallu and Dey, Suhash Ranjan (2018) Design and Development of β Ti Alloys Through First Principles Calculations and Powder Metallurgy Route for Biomedical Applications. PhD thesis, Indian Institute of Technology Hyderabad.

K., Rajamallu and Niranjan, Manish K and Dey, Suhash Ranjan and et al, . (2016) Fabrication of Biocompatible Ti-Nb-Sn Through Powder Metallurgy Route for Orthopedic Implants. In: 13th World Conference Titanium, 2015, San Diego, USA.

KARRI, SRI NAGA SESHA and Ramadurai, Ranjit and Bhattacharjee, Pinaki Prasad (2018) Pulsed laser deposition of CoCrFeMnNi High Entropy Alloy and its stability. Masters thesis, Indian Institute of Technology Hyderabad.

Kakunuri, M and Khandelwal, Mudrika and Sharma, Chandra Shekhar and Eichhorn, S J (2017) Fabrication of Bio-inspired Hydrophobic Self-Assembled Electrospun Nanofiber Based Hierarchical Structures. Materials Letters, 196. pp. 339-342. ISSN 0167-577X

Kakunuri, M and Wanasekara, N D and Sharma, Chandra Shekhar and Khandelwal, Mudrika and Eichhorn, S J (2017) Three-dimensional electrospun micropatterned cellulose acetate nanofiber surfaces with tunable wettability. Journal of Applied Polymer Science, 134 (15). p. 44709. ISSN 0021-8995

Kandan, K and Khaderi, Syed Nizamuddin and Wadley, H N G and Deshpande, V S (2017) Surface instabilities in shock loaded granular media. Journal of the Mechanics and Physics of Solids, 109. pp. 217-240. ISSN 0022-5096

Kannan, P K and Chaudhari, Sushmita and Dey, Suhash Ranjan (2018) Detailed investigations on influence of precursor stacking and sulfurization for Cu 2 ZnSnS 4 film formation. Thin Solid Films. ISSN 0040-6090 (In Press)

Kannan, P K and Chaudhari, Sushmita and Dey, Suhash Ranjan (2019) Impact of sulphurization environment on formation of $$\hbox {Cu}_{2}\hbox {ZnSnS}_{4}$$ Cu 2 ZnSnS 4 films using electron beam evaporated stacked metallic precursors. Bulletin of Materials Science, 42 (1). ISSN 0250-4707

Kannan, Y S and Karri, Badarinath and Sahu, Kirti Chandra (2018) Letter: Entrapment and interaction of an air bubble with an oscillating cavitation bubble. Physics of Fluids, 30 (4). 041701. ISSN 1070-6631

Kanwal, C and Bhattacharjee, Pinaki Prasad and Mohammad, J (2015) Characterization of Minerals, Metals, and Materials. In: TMS Annual Meeting, January, 2015.

Karre, R and Niranjan, M K and Dey, Suhash Ranjan (2015) First principles theoretical investigations of low Young's modulus beta Ti-Nb and Ti-Nb-Zr alloys compositions for biomedical applications. Materials Science and Engineering: C, 50. pp. 52-58. ISSN 0928-4931

Karre, Rajamallu and Kodli, Basanth Kumar and Rajendran, Archana and J, Nivedhitha and Pattanayak, Deepak K and Ameyama, Kei and Dey, Suhash Ranjan (2019) Comparative study on Ti-Nb binary alloys fabricated through spark plasma sintering and conventional P/M routes for biomedical application. Materials Science and Engineering: C, 94. pp. 619-627. ISSN 0928-4931

Karre, Rajamallu and Niranjan, Manish K and Dey, Suhash Ranjan (2015) Development of β Ti-xNb alloys through firstprinciples DFT analysis and P/M route for orthopedic implants. Transactions of PMAI, 41 (2). pp. 51-54. ISSN 0377-9416

Karthik, T and Asthana, Saket (2017) Enhanced mechanical and ferroelectric properties through Grain size refinement in site specific substituted lead free Na0.5-xKxBi0.5TiO3 (x = 0 – 0.10) ceramics. Materials Letters, 190. pp. 273-275. ISSN 0167-577X

Karthik, T and Radhakrishanan, Dhanya and Narayana, Chandrabhas and Asthana, Saket (2018) Nature of electric field driven ferroelectric phase transition in lead-free Na 1/2 Bi 1/2 TiO 3 : In-situ temperature dependent ferroelectric hysteresis and Raman scattering studies. Journal of Alloys and Compounds, 732 (25). pp. 945-951. ISSN 0925-8388

Kashfuddoja, M and M, Ramji (2015) Assessment of local strain field in adhesive layer of an unsymmetrically repaired CFRP panel using digital image correlation. International Journal of Adhesion and Adhesives, 57. pp. 57-69. ISSN 0143-7496

Kelp, G and Arju, N and Lee, A and Esquivel, E and Delgado, R and Yu, Y and Gupta, S D and Sokolov, K. and Shvets, G. (2019) Application of metasurface-enhanced infra-red spectroscopy to distinguish between normal and cancerous cell types. Analyst, 144 (4). pp. 1115-1127. ISSN 0003-2654

Kesavan, P K Pidugu and Chaudhari, Sushmita and Dey, Suhash Ranjan (2016) Effects of Stacking Sequences in the Formation of CZTS Thin Film Using Electron Beam Evaporation. In: 32nd European Photovoltaic Solar Energy Conference and Exhibition, 20-24 June 2016, Munich, Germany.

Khandelwal, M and Windle, A (2014) Origin of chiral interactions in cellulose supra-molecular microfibrils. Carbohydrate Polymers, 106 (1). pp. 128-131. ISSN 0144-8617

Khandelwal, Mudrika and Aggarwal, Kadam (2016) Contextualising Engineering Education to 21st Century - MBA Style Education for Engineering. In: Journal of Engineering Education Transformations, 2016.

Khandelwal, Mudrika and Deshpande, Atul Suresh (2019) IIT Hyderabad scientists convert fly ash into waterproofing material. Down to Earth, Hyderabad.

Khandelwal, Mudrika and Windle, A H and Hessler, N (2016) In situ tunability of bacteria produced cellulose by additives in the culture media. Journal of Materials Science, 51 (10). pp. 4839-4844. ISSN 0022-2461

Kodli, B K and Saxena, K K and Dey, Suhash Ranjan and Pancholi, V and Bhattacharjee, A (2015) Texture studies of hot compressed near alpha titanium alloy (IMI 834) at 1000°C with different strain rates. In: 17th International Conference on Textures of Materials, 24-29 August, 2014, Dresden; Germany.

Kodli, Basanth Kumar and Karre, Rajamallu and Saxena, Kuldeep K and Pancholi, Vivek and Dey, Suhash Ranjan and Bhattacharjee, Amit (2017) Flow behaviour of TiHy 600 alloy under hot deformation using gleeble 3800. Advances in Materials and Processing Technologies, 3 (4). pp. 490-510. ISSN 2374-068X

Kolanu, Naresh Reddy (2016) Material Characterisation at Elevated Temperatures Involving Digital Image Correlation (DIC). Masters thesis, Indian Institute of Technology Hyderabad.

Kolanu, Naresh Reddy and Raju, Gangadharan and M, Ramji (2018) Experimental and numerical studies on the buckling and post-buckling behavior of single blade-stiffened CFRP panels. Composite Structures. ISSN 0263-8223 (In Press)

Kotnana, G and J, Suryanarayana (2015) Band gap tuning and orbital mediated electron–phonon coupling in HoFe1−xCrxO3 (0 ≤ x ≤ 1). Journal of Applied Physics, 118 (124101). pp. 1-7. ISSN 0021-8979

Koundinya, N T B N and E, Nandha Kumar and Chawake, Niraj and Korla, Rajesh and Kottada, Ravi Sankar (2018) A simple and versatile machine for creep testing at low loads (6–300 N) and on miniaturized specimens: Application to a Mg-base alloy. Review of Scientific Instruments, 89 (10). pp. 1-10. ISSN 0034-6748

Kumar, Abhinav and Asthana, Saket (2015) Synthesis and characterization of BaTiO3/CoFe2O4 bulk magneto-electric composite system. Masters thesis, Indian Institute of Technology Hyderabad.

Kumar, Basant and Dey, Suhash Ranjan and Saxena, Kuldeep K et. al (2016) Microstructural evolution in hot compressed TiHy 600 titanium alloy. Journal of Metallurgy and Materials Science. ISSN 0974-1267

Kumar, Harendra and Dey, Suhash Ranjan (2018) Effects of Ball Milling on β(Beta) Titanium Alloys for Biomedical Applications. Masters thesis, Indian Institute of Technology Hyderabad.

Kumar, K B and Saxena, K K and Dey, Suhash Ranjan and Pancholi, V and Bhattacharjee, A (2017) Processing map-microstructure evolution correlation of hot compressed near alpha titanium alloy (TiHy 600). Journal of Alloys and Compounds, 691. pp. 906-903. ISSN 0925-8388

Kumar K, Basanth and Karre, Rajamallu and Dey, Suhash Ranjan (2016) Correlation Between Processing Map Domains and Microstructure of 50% Hot Compressed IMI 834 Ti Alloy. In: Proceedings of the 13th World Conference on Titanium, San Diego, USA.

Kumar Makineni, Surendra and Sugathan, Sandeep and Meher, Subhashish and Banerjee, Rajarshi and Bhattacharya, Saswata and Kumar, Subodh and Chattopadhyay, Kamanio (2017) Enhancing elevated temperature strength of copper containing aluminium alloys by forming L12 Al3Zr precipitates and nucleating θ″ precipitates on them. Scientific Reports, 7 (1). ISSN 2045-2322

L

Lahiri, A and Abinandanan, T A and Gururajan, M P and Bhattacharya, Saswata (2014) Effect of epitaxial strain on phase separation in thin films. Philosophical Magazine Letters, 94 (11). pp. 702-707. ISSN 0950-0839 (In Press)

M

M, Usha Rani (2014) Effect of processing conditions on the properties of nanostructured BiFeO3 obtained using different synthetic strategies. Masters thesis, Indian Institute of Technology Hyderabad.

M M, Saj Mohan and Bandyopadhyay, Soumya and Jogi, Tushar and Bhattacharya, Saswata and Ramadurai, Ranjit (2019) Realization of rhombohedral, mixed, and tetragonal like phases of BiFeO3 and ferroelectric domain engineering using a strain tuning layer on LaAlO3(001) substrate. Journal of Applied Physics, 125 (1). ISSN 0021-8979

M V, Sreenath and Ramadurai, Ranjit (2018) Tip Induced Surface Defect migration and Conductivity Studies in Rhombohedral epitaxial BiFeO3 Thin Films. Masters thesis, Indian Institute of Technology Hyderabad.

M., Saj Mohan M and Ramadurai, Ranjit (2019) Influence of Strain and Anisotropy on Structure of BiFeO3 Epilayers and their Utilization as Interface Driven Heterostructures for Multiferroic Device Applications. PhD thesis, Indian institute of technology Hyderabad.

M., Saj Mohan M and Ramadurai, Ranjit (2018) Template assisted strain tuning and phase stabilization in epitaxial BiFeO3 thin films. In: AIP Conference Proceedings 1942.

Madhav Kumar, V and Srinivas, A and Talapatra, A and Asthana, Saket and Mohanty, J and Kamat, S V (2017) Effect of deposition temperature on structural, microstructural and magnetic properties of CoFe2O4 thin films deposited by pulsed laser deposition. Journal of Materials Science: Materials in Electronics, 28 (1). pp. 446-453. ISSN 0957-4522

Mahanta, Urbashi and Khandelwal, Mudrika and Deshpande, Atul Suresh (2019) Wetting Transition from Lotus Leaf to Rose Petal using Modified Fly Ash. ChemistrySelect, 4 (27). pp. 7936-7942. ISSN 2365-6549

Maharana, H S and Akarapu, A and Pal, S and Basu, A (2016) Surface-Mechanical Properties of Electrodeposited Cu-Al2O3 Composite Coating and Effects of Processing Parameters. Metallurgical and Materials Transactions A, 47 (1). pp. 388-399. ISSN 1073-5623

Mahata, Bidesh and Ramadurai, Ranjit (2019) Structural and dielectric studies of ferroelectric Nd2Ti2O7 for high temperature pyro sensor application. Masters thesis, Indian institute of technology Hyderabad.

Maity, Palash Chandra (2016) Polyaniline: Synthesis and Natural Nanocomposites. Masters thesis, Indian Institute of Technology Hyderabad.

Mallesham, B and Ramadurai, Ranjit and Manivelraja, M (2014) Scandium induced structural transformation and B':B' cationic ordering in Pb(Fe0.5Nb0.5)O3 multiferroic ceramics. Journal of Applied Physics, 116 (3). ISSN 0021-8979

Mallesham, Bandi and Ramadurai, Ranjit (2016) Investigations on Dielectric phase transition behavior of Pb(Fe0.5-xScx)Nb0.5O3 Multiferroic Ceramics. MRS Advances, 1 (9). pp. 585-590. ISSN 2059-8521

Mandati, S (2015) Fabrication of CuInSe2 and Cu(In,Ga)Se2 Absorber Layers by Pulse- and Pulse-reverse Electrochemical Techniques for Solar Photovoltaic Applications. PhD thesis, Indian Institute of Technology Hyderabad.

Mandati, S and Bulusu, V S and Dey, Suhash Ranjan and Joshi, S V (2014) CuIn1-xGaxSe2 thin-film absorber layers for solar photovoltaics fabricated by two-stage pulsed current electrodeposition. Materials Letters, 118 (1). pp. 158-160. ISSN 0167-577X

Mandati, S and Bulusu, V S and Dey, Suhash Ranjan and Joshi, S V (2015) Enhanced photoresponse of Cu(In,Ga)Se2 /CdS heterojunction fabricated using economical non-vacuum methods. Electronic Materials Letters, 11 (4). pp. 618-624. ISSN 2093-6788

Mandati, S and Bulusu, V S and Dey, Suhash Ranjan and Joshi, S V (2013) Improved Photoelectrochemical Performance Of Cu(In,Ga)Se2 Thin Films Prepared By Pulsed Electrodeposition. Journal of Renewable and Sustainable Energy, 5. 031602. ISSN 1941-7012

Mandati, S and Bulusu, V S and Dey, Suhash Ranjan and Joshi, S V (2015) Photoelectrochemistry of Cu(In,Ga)Se2 thin-films fabricated by sequential pulsed electrodeposition. Journal of Power Sources, 273. pp. 149-157. ISSN 0378-7753

Mandati, S and Bulusu, V S and Dey, Suhash Ranjan and Joshi, S V (2013) Pulsed electrodeposition of Cuinse2 thin films with morphology for solar cell applications. Journal of The Electrochemical Society, 160 (4). D173-D177. ISSN 0013-4651

Mandati, S and Dey, Suhash Ranjan and Joshi, Shrikant V and Bulusu, V S (2019) Two-dimensional CuIn1− xGaxSe2 nano-flakes by pulse electrodeposition for photovoltaic applications. Journal of Magnetism and Magnetic Materials, 181. pp. 396-404. ISSN 0304-8853

Mandati, Sreekanth and Dey, Suhash Ranjan and Joshi, Shrikant V and Bulusu, Sarada V (2018) Cu(In,Ga)Se2 Films with Branched Nanorod Architectures Fabricated by Economic and Environmentally Friendly Pulse-Reverse Electrodeposition Route. ACS Sustainable Chemistry & Engineering, 6 (11). pp. 13787-13796. ISSN 2168-0485

Mandi, Soumen (2016) Studies on attaining 0.5(Ba0.7Ca0.3TiO3) -0.5(BaZr0.2Ti0.8O3) morphotrophic composition through multilayer approach. Masters thesis, Indian Institute of Technology Hyderabad.

Mane, R B (2014) Effect of Additives on Sintering Of Ti3SiC2 Powder. Masters thesis, Indian Institute of Technology, Hyderabad.

Mane, Rahul B and Haribabu, Ampolu and Panigrahi, Bharat Bhooshan (2018) Synthesis and sintering of Ti3GeC2 MAX phase powders. Ceramics International, 44 (1). pp. 890-893. ISSN 02728842

Mane, Rahul B and Panigrahi, Bharat Bhooshan (2018) Comparative study on sintering kinetics of as-milled and annealed CoCrFeNi high entropy alloy powders. Materials Chemistry and Physics, 210. pp. 49-56. ISSN 0254-0584

Mane, Rahul B and Panigrahi, Bharat Bhooshan (2018) Effect of alloying order on non-isothermal sintering kinetics of mechanically alloyed high entropy alloy powders. Materials Letters, 217. pp. 131-134. ISSN 0167-577X

Mane, Rahul B and Panigrahi, Bharat Bhooshan (2017) GRAIN BOUNDARY SLIDING ASSISTED DENSIFICATION DURING INITIAL SINTERING STAGE OF MECHANICALLY ALLOYED CoFeNi POWDERS. TRANSACTIONS OF POWDER METALLURGY ASSOCIATION OF INDIA, 43 (1). pp. 13-19.

Mane, Rahul B and Panigrahi, Bharat Bhooshan (2019) Sintering Mechanisms of Mechanically Alloyed High Entropy Alloy Powders. PhD thesis, Indian institute of technology Hyderabad.

Mane, Rahul B and Panigrahi, Bharat Bhooshan (2018) Sintering mechanisms of mechanically alloyed CoCrFeNi high-entropy alloy powders. Journal of Materials Research. pp. 1-9. ISSN 0884-2914 (In Press)

Mane, Rahul B and Y, Rajkumar and Panigrahi, Bharat Bhooshan (2018) Sintering mechanism of CoCrFeMnNi high-entropy alloy powders. Powder Metallurgy, 61 (2). pp. 131-138. ISSN 0032-5899

Manivannan, A and S K, Myana and Miriyala, K and Sahu, S and Ramadurai, R (2014) Low power ovonic threshold switching characteristics of thin GeTe6 films using conductive atomic force microscopy. Applied Physics Letters, 105 (243501). pp. 1-5. ISSN 0003-6951

Mannepalli, Venkateswara Rao and M M, Saj Mohan and Ramadurai, Ranjit (2017) Tailoring the Band gap and magnetic properties by Bismuth substitution in Neodymium Chromite. Bulletin of Materials Science. pp. 1-24. ISSN 0250-4707 (In Press)

Mannepalli, Venkateswara Rao and Mohan, M M Saj and Ranjith, R (2017) Tailoring the bandgap and magnetic properties by bismuth substitution in neodymium chromite. Bulletin of Materials Science, 40 (7). pp. 1503-1511. ISSN 0250-4707

Mannepalli, Venkateswara Rao and Raghunathan, R and Ramadurai, Ranjit (2017) Local structural distortion and interrelated phonon mode studies in yttrium chromite. Journal of Materials Research, 32 (8). pp. 1541-1547. ISSN 0884-2914

Mannepalli, Venkateswara Rao and Ramadurai, Ranjit (2017) AC - conductivity studies on Y1-xBixCrO3 solid solution. AIP Conference Proceedings, 1832. p. 110017. ISSN 0094-243X

Mannepalli, Venkateswara Rao and Ramadurai, Ranjit (2017) Structural and electrical transport studies in Bi-substituted Yttrium Chromite. Journal of Materials Science: Materials in Electronics, 28 (11). pp. 8087-8092. ISSN 0957-4522

Mannepalli, Venkateswara Rao and Ramadurai, Ranjit (2017) Structural, Electrical, Optical and Magnetic properties of Y1-xBixCrO3and Nd1-xBixCrO3 (x=0 to 0.15) Ceramics. PhD thesis, Indian Institute of Technology Hyderabad.

Mannepalli, Venkateswara Rao and Ramadurai, Ranjit (2016) Studies on Local Structural Inhomogeneity and Origin of Ferroelectricity in Yttrium chromite Ceramics. MRS Advances, 1 (9). pp. 609-614. ISSN 2059-8521

Mastanaiah, P and Sharma, Abhay and Reddy, G. Madhusudhan (2018) Process parameters-weld bead geometry interactions and their influence on mechanical properties: A case of dissimilar aluminium alloy electron beam welds. Defence Technology, 14 (2). pp. 137-150. ISSN 2214-9147

Maurya, A K (2015) Synthesis and Mechanical Studies of Mg-Hydroxyapatite Composite for Bio materials Applications. Masters thesis, Indian Institute of Technology Hyderabad.

Meshram, M P (2014) Friction Stir Welding of Austenitic Stainless Steel (AISI- 316) To Ti-6Al-4V and Its Joint Analyses. Masters thesis, Indian Institute of Technology Hyderabad.

Meshram, Manish P and Tamboli, Rameez Rajmahammad and Kodli, Basanth Kumar and Yebaji, Sushil Gyanoba and Dey, Suhash Ranjan (2018) Texture analyses of friction stir welded austenitic stainless steel AISI-316L. Advances in Materials and Processing Technologies, 4 (2). pp. 244-254. ISSN 2374-068X

Miriyala, K and Ramadurai, Ranjit (2016) Tunable ferroelectric domain orientation in polycrystalline and highly oriented Na0.5Bi0.5TiO3 Thin Films. Materials Letters, 178. pp. 23-26. ISSN 0167-577X

Miriyala, Kumaraswamy and Ramadurai, Ranjit (2018) Microstructural influence on ferroelectric domain pattern and piezoelectric properties of Na 0.5 Bi 0.5 TiO 3 thin films. Ceramics International, 44 (12). pp. 14556-14562. ISSN 0272-8842

Miriyala, Kumaraswamy and Ramadurai, Ranjit (2016) Microstructural influence on piezoresponse and leakage current behavior of Na0.5Bi0.5TiO3 Thin Films. MRS Advances, 1 (37). pp. 2597-2602. ISSN 2059-8521

Miriyala, Kumaraswamy and Ramadurai, Ranjit (2019) Texture and Microstructural Influence on Piezoelectric Properties of Na0.5Bi0.5TiO3 Thin Films: A Lead Free Piezoelectric Material. PhD thesis, Indian institute of technology Hyderabad.

Myana, S K (2013) Electrical Transport Properties of Amorphous Ge15Te85 Thin Films Using Scanning Probe Microscopy for Phase Change Memory Applications. Masters thesis, Indian Institute of Technology Hyderabad.

N

N, Ramu and K, Meera and Ramadurai, Ranjit and Rajaram, Muralidharan (2018) The Role of B-site Substitution on the Structural and Dielectric Properties of Samarium Orthoferrite Polycrystals. Materials Research Express. ISSN 2053-1591

Naidu, Palleda Thaviti and Korla, Rajesh (2019) Effect of Temperature and Strain rate on Flow behavior of Al0.3CoCrFeNi HEA. Masters thesis, Indian institute of technology Hyderabad.

Ndione, Paul F and Ratcliff, Erin L and Dey, Suhash Ranjan et. al. (2019) High-Throughput Experimental Study of Wurtzite Mn1–xZnxO Alloys for Water Splitting Applications. ACS Omega, 4 (4). pp. 7436-7447. ISSN 2470-1343

Niranjan, Manish K (2016) Infrared reflectivity and Raman intensity spectrum of relaxor ferroelectric Na1/2 Bi1/2TiO3 at room temperature: a first-principles theoretical study. Materials Research Express, 3 (12). p. 125501. ISSN 2053-1591

P

P, Mastanaiah and Sharma, Abhay and Reddy, G M (2016) Dissimilar Friction Stir Welds in AA2219-AA5083 Aluminium Alloys: Effect of Process Parameters on Material Inter-Mixing, Defect Formation, and Mechanical Properties. Transactions of the Indian Institute of Metals, 69 (7). pp. 1397-1415. ISSN 0972-2815

P Lavanya, Devi and Gupta, Shourya Dutta (2019) Tunable plasmonic devices for active control of molecular coupling and optical trapping. Masters thesis, Indian institute of technology Hyderabad.

P V, Anju and Khandelwal, Mudrika (2019) In situ Derived Composites of Recycled Polystyrene and Bacterial cellulose. Masters thesis, Indian institute of technology Hyderabad.

Pachalla, S K S and S, Suriya Prakash (2017) Efficient near surface mounting CFRP strengthening of pretensioned hollowcore slabs with opening - An experimental study. Composite Structures, 162. pp. 28-38. ISSN 0263-8223

Palai, Debabrata and Khandelwal, Mudrika (2019) Bacterial cellulose membranes for ultrafiltration. Masters thesis, Indian institute of technology Hyderabad.

Palli, S and Dey, Suhash Ranjan (2016) Theoretical and Experimental Study of Copper Electrodeposition in a Modified Hull Cell. International Journal of Electrochemistry, 2016 (348240). pp. 1-13. ISSN 2090-3529

Palli, S and Hamann, S and Wambach, M and Ludwig, A and Dey, Suhash Ranjan (2015) Fabrication of a Ni-Cu Thin Film Material Library Using Pulsed Electrodeposition. Journal of The Electrochemical Society, 161 (10). D504-D509. ISSN 0013-4651

Palli, Srinivas (2016) Theoretical and Experimental Studies of Single Metals (Cu and Ni) and Binary Ni-Cu alloy Electrodeposition in a Modified Hull cell: A Combinatorial Approach. PhD thesis, Indian Institute of Technology Hyderabad.

Palli, Srinivas and Dey, Suhash Ranjan (2017) Numerical simulation and experimental investigation of combinatorial electrodeposition of Ni-Cu material library using modified Hull cell. Physica Status Solidi (a), 214 (10). p. 1700084. ISSN 1862-6300

Palli, Srinivas and Dey, Suhash Ranjan (2017) Thermal stability of pulse electroplated gold films: SEM-EBSD studies. Advanced Material Science, 2 (1). ISSN 23986883

Panchagnula, Jayaprakash Sharma and Simhambhatla, S (2016) Additive Manufacturing of Complex Shapes Through Weld-Deposition and Feature Based Slicing. In: ASME International Mechanical Engineering Congress and Exposition (IMECE2015), Nov 13-19, 2015, Houston, TX.

Pankaj, Pankaj and Dey, Suhash Ranjan (2012) Friction Stir Welding (FSW) Studies of Dissimilar Al-Based Alloys Using Different Pin Profiles. Masters thesis, Indian Institute of Technology Hyderabad.

Pantula, P D and Miriyala, S S and Mitra, Kishalay (2016) KERNEL: Enabler to Build Smart Surrogates for Online Optimization and Knowledge Discovery. Materials and Manufacturing Processes. ISSN 1042-6914 (In Press)

Parchuri, Pradeep Kumar (2016) A Study of Melt Ratio and Microstructure in Dissimilar Fusion Welds. Masters thesis, Indian Institute of Technology Hyderabad.

Patel, A and Wani, I and Reddy, S R and Narayanaswamy, S and Lozinko, A and Saha, R and Guo, S and Bhattacharjee, Pinaki Prasad (2018) Strain-path controlled microstructure, texture and hardness evolution in cryo-deformed AlCoCrFeNi 2.1 eutectic high entropy alloy. Intermetallics, 97. pp. 12-21. ISSN 0966-9795

Patel, Amit and Bhattacharjee, Pinaki Prasad (2018) Strain-path controlled microstructure, texture and hardness evolution in cryo-deformed AlCoCrFeNi2.1 eutectic high entropy alloy. Masters thesis, Indian Institute of Technology Hyderabad.

Pavithra, C L P and Janardhan, R K S K and Ummethala, Govind and M, Chandrasekhar and Malladi, Sairam K and Dey, Suhash Ranjan (2019) An Electrochemical Approach for Development of Novel Magnetic Multicomponent Alloy Thin Films for Sensor Applications. The Electrochemical Society.

Pinaki, P B and Mohammed, Z A (2014) Effect of Warm-Rolling On the Formation of Microstructure and Microtexture of the Constituent Phases in a Duplex Steel. In: Materials Science Forum, 2-6, December 2013, Las Vegas, NV; United States.

Prabahar, K and Ramadurai, Ranjit (2019) Growth and Characterization of lead free Multiferroic Ba0.85Ca0.15Zr0.10Ti0.90O3 –CoFe2O4 Nano Composite Thin Films. PhD thesis, Indian institute of technology Hyderabad.

Prabahar, K and Ramadurai, Ranjit and Saravanan, P and Srinivas, A (2018) Effect of Magnetic Field Annealing on the Magnetostriction and Deflection Properties of CoFe2O4 Thin Films Grown by PLD. Journal of Magnetism and Magnetic Materials. ISSN 0304-8853 (In Press)

Prabahar, K and Ramadurai, Ranjit and Srinivas, A and Kamat, S V and Mallesham, B and Niranjani, V L and Praveen, J P and Das, D (2017) Effect of deposition temperature on the microstructure, ferroelectric and mechanical properties of lead free BCZT ceramic thin films. Ceramics International, 43 (6). pp. 5356-5361. ISSN 0272-8842 (In Press)

Prasad, H and Singh, S and Panigrahi, Bharat Bhooshan (2017) Mechanical activated synthesis of alumina dispersed FeNiCoCrAlMn high entropy alloy. Journal of Alloys and Compounds, 692. pp. 720-726. ISSN 0925-8388

R

R, Manivannan (2016) Gelcasting of High Temperature Radome Materials by Using Inorganic Binders. PhD thesis, Indian Institute of Technology Hyderabad.

R, Navneeth and Malladi, Sairam K (2019) Corrosion behaviour of Nano-lamellar AlCrCoFeNi2.1 Eutectic High Entropy Alloy. Masters thesis, Indian institute of technology Hyderabad.

Rajamallu, Karre and Niranjan, Manish K and Kei, Ameyama and Dey, Suhash Ranjan (2017) Phase stability and elastic properties of β Ti-Nb-X (X=Zr, Sn) alloys: An ab-initio density functional study. Modelling and Simulation in Materials Science and Engineering. ISSN 0965-0393 (In Press)

Rajkumar, Y and Aakash, P A and Bhattacharya, Saswata and Panigrahi, Bharat Bhooshan (2016) Mechanically Activated Synthesis of Nanocrystalline Cr2 AiC Powders. In: Transactions of Powder Metallurgy Association of India.

Rajkumar, Yembadi and Panigrahi, Bharat Bhooshan (2017) Thermodynamic assessments and mechanically activated synthesis of ultrafine Cr2AlC MAX phase powders. Advanced Powder Technology, 28 (3). pp. 732-739. ISSN 09218831

Ram, S and V, Kanchana (2013) Fermi Surface Studies of Co-Based Heusler Alloys: Ab-Initio Study. In: 57th DAE Solid State Physics Symposium 2012; Bombay, 3-7, December 2012, Mumbai; India.

Rani, M Usha and Deshpande, Atul Suresh and Ramadurai, Ranjit (2015) Effect of Template and Processing Conditions on BiFeO3 Nanofoams Synthesized by Sol-gel Method. In: International Conference on Magnetic Materials and Applications ICMAGMA, December 2015, Chennai, India.

Reddy, N S and Panigrahi, Bharat Bhooshan and Ho, C M and Kim, J H and Lee, C S (2015) Artificial neural network modeling on the relative importance of alloying elements and heat treatment temperature to the stability of α and β phase in titanium alloys. Computational Materials Science, 107. pp. 175-183. ISSN 0927-0256 (In Press)

Reddy, N S and Panigrahi, Bharat Bhooshan and Krishnaiah, J (2013) Modeling mechanical properties of low carbon hot rolled steels. In: 7th International Conference on Bio-Inspired Computing: Theories and Applications, BIC-TA 2012, 14-16, December 2012, Gwalior, Madhya Pradesh; India.

Reddy, P V S and V, Kanchana and Ruban, A V and Christensen, N E (2017) Evidence for the antiferromagnetic ground state of Zr2TiAl: a first-principles study. Journal of Physics Condensed Matter, 29 (26). p. 265801. ISSN 0953-8984

Reddy, S R and Ahmed, M Z and Sathiaraj, G D and Bhattacharjee, Pinaki Prasad (2017) Effect of strain path on microstructure and texture formation in cold-rolled and annealed FCC equiatomic CoCrFeMnNi high entropy alloy. Intermetallics, 87. pp. 94-103. ISSN 0966-9795

Reddy, S R and Sunkari, Upender and Bhattacharjee, Pinaki Prasad and et al, . (2019) Engineering heterogeneous microstructure by severe warm-rolling for enhancing strength-ductility synergy in eutectic high entropy alloys. Materials Science and Engineering: A, 764. p. 138226. ISSN 09215093

Reddy, S R and Sunkari, Upender and Bhattacharjee, Pinaki Prasad and et al, . (2019) Microstructure and texture of a severely warm-rolled and annealed AlCoCrFeNi2.1 eutectic high entropy alloy. Journal of Physics: Conference Series, 1270. 012054. ISSN 1742-6588

Reddy, S. R. and Bapari, S. and Bhattacharjee, Pinaki Prasad and Chokshi, A. H. (2017) Superplastic-like flow in a fine-grained equiatomic CoCrFeMnNi high-entropy alloy. Materials Research Letters, 5 (6). pp. 408-414. ISSN 2166-3831

Reddy, S. R. and Yoshida, S and Bhattacharjee, Pinaki Prasad (2019) Nanostructuring with Structural-Compositional Dual Heterogeneities Enhances Strength-Ductility Synergy in Eutectic High Entropy Alloy. Scientific Reports, 9 (1). ISSN 2045-2322

Reddy, Seelam Rajasekhar and Sunkari, Upender and Lozinko, Adrianna and Guo, Sheng and Bhattacharjee, Pinaki Prasad (2019) Development and homogeneity of microstructure and texture in a lamellar AlCoCrFeNi2.1 eutectic high-entropy alloy severely strained in the warm-deformation regime. Journal of Materials Research. pp. 1-13. ISSN 0884-2914

Reddy, T S and Wani, I S and Bhattacharjee, T and Reddy, S R and Saha, R and Bhattacharjee, Pinaki Prasad (2017) Severe plastic deformation driven nanostructure and phase evolution in a Al 0.5 CoCrFeMnNi dual phase high entropy alloy. Intermetallics, 91. pp. 150-157. ISSN 0966-9795

Rohila, Sahil and Mane, Rahul B and Ummethala, Govind and Panigrahi, Bharat Bhooshan (2019) Nearly full-density pressureless sintering of AlCoCrFeNi-based high-entropy alloy powders. Journal of Materials Research. pp. 1-10. ISSN 0884-2914

Roopavath, Uday Kiran and Sah, Mahesh Kumar and Panigrahi, Bharat Bhooshan and Rath, Subha Narayan (2019) Mechanochemically synthesized phase stable and biocompatible β-tricalcium phosphate from avian eggshell for the development of tissue ingrowth system. Ceramics International. ISSN 0272-8842 (In Press)

Roy, S and Maharana, R and Reddy, S R and Singh, S and Kumar, P and Karthik, T and Asthana, Saket and Prasad, V V B and Kamat, S V (2016) Structural, ferroelectric and piezoelectric properties of chemically processed, low temperature sintered piezoelectric BZT–BCT ceramics. Materials Research Express, 3 (3). ISSN 2053-1591

S

S, Suryakumar and Karunakaran, K P and Bernard, A and Chandrasekhar, U and Raghavender, N and Sharma, D (2011) Weld bead modeling and process optimization in Hybrid Layered Manufacturing. Computer-Aided Design, 43 (4). pp. 331-344. ISSN 0010-4485

S M, Rezwanul Islam and Deshpande, Atul Suresh (2018) Synthesis and characterization of PANI/CeO2 composite. Masters thesis, Indian Institute of Technology Hyderabad.

S S, Satheesh Kumar and Bhattacharjee, Pinaki Prasad (2019) HOT DEFORMATION BEHAVIOUR OF A POWDER METALLURGY NICKEL BASE SUPERALLOY. PhD thesis, Indian institute of technology Hyderabad.

S S, Satheesh Kumar and T, Raghu and Bhattacharjee, Pinaki Prasad and G, Appa Rao and Borah, U (2015) Constitutive modeling for predicting peak stress characteristics during hot deformation of hot isostatically processed nickel-base superalloy. Journal of Materials Science: Materials in Electronics, 50 (19). pp. 6444-6456. ISSN 0022-2461

S S, Satheesh Kumar and T, Raghu and Bhattacharjee, Pinaki Prasad and G, Appa Rao and Borah, U (2016) Strain rate dependent microstructural evolution during hot deformation of a hot isostatically processed nickel base superalloy. Journal of Alloys and Compounds, 681 (5). pp. 28-42. ISSN 0925-8388

Saha, S and Bhattacharjee, Pinaki Prasad (2012) Effect of Change in Strain Path during Cold Rolling on the Evolution of Microstructure, Texture and Hardness Properties of Different Aluminum Alloys. Masters thesis, Indian Institute of Technology Hyderabad.

Saini, Rahul Kumar and Bhattacharya, Saswata (2018) A Phase Field Study of Spinodal Decomposition in Systems with Variable Mobility. Masters thesis, Indian Institute of Technology Hyderabad.

Saj Mohan, M M and M V, S and Ramadurai, Ranjit (2018) Tip Induced Surface Defect migration and Conductivity Studies in Tetragonal, Rhombohedral and Mixed-Phase epitaxial BiFeO3 Thin Films. MRS Advances. pp. 1-6. ISSN 2059-8521

Sajan, S G and Dey, Suhash Ranjan (2012) Friction Stir Welding of Aluminum 6082 with Mild Steel and Its Joint Analyses. Masters thesis, Indian Institute of Technology Hyderabad.

Sajmohan, M M and Ranjith, R and Chelvane, J Arout (2019) Effect of non- $$180^{\circ }$$ 180 ∘ polarization invariants on the exchange bias of tetragonal $$\langle 001\rangle $$ ⟨ 001 ⟩ and rhombohedral $$\langle 111\rangle $$ ⟨ 111 ⟩ orientations of bismuth ferrite epitaxial thin films. Bulletin of Materials Science, 42 (5). ISSN 0250-4707

Saranath, K M and Sharma, Abhay and M, Ramji (2014) Zone wise local characterization of welds using digital image correlation technique. Optics and Lasers in Engineering, 63. pp. 30-42. ISSN 0143-8166

Sarker, B and Zehnder, T and Rath, Subha Narayan and Horch, R E and Kneser, U and Detsch, R and Boccaccini, A R (2017) Oxidized Alginate-Gelatin Hydrogel: A Favorable Matrix for Growth and Osteogenic Differentiation of Adipose-Derived Stem Cells in 3D. ACS Biomaterials Science & Engineering, 3 (8-SI). pp. 1730-1737. ISSN 2373-9878

Satapathy, Yashobanta and Chatterjee, Subhradeep (2017) Laser Welding Studies on a Co-based Superalloy. Masters thesis, Indian Institute of Technology Hyderabad.

Satheesh Kumar, S S and T, Raghu and Bhattacharjee, Pinaki Prasad and G, Appa Rao and Borah, U (2017) Work hardening characteristics and microstructural evolution during hot deformation of a nickel superalloy at moderate strain rates. Journal of Alloys and Compounds, 709. pp. 394-409. ISSN 0925-8388

Sathiaraj, G D and Ahmed, M Z and Bhattacharjee, Pinaki Prasad (2016) Microstructure and texture of heavily cold-rolled and annealed fcc equiatomic medium to high entropy alloys. Journal of Alloys and Compounds, 664. pp. 109-119. ISSN 0925-8388

Sathiaraj, G D and Bhattacharjee, Pinaki Prasad (2015) Analysis of microstructure and microtexture during grain growth in low stacking fault energy equiatomic CoCrFeMnNi high entropy and Ni–60 wt.%Co alloys. Journal of Alloys and Compounds, 637. pp. 267-276. ISSN 0925-8388

Sathiaraj, G D and Bhattacharjee, Pinaki Prasad (2015) Effect of cold-rolling strain on the evolution of annealing texture of equiatomic CoCrFeMnNi high entropy alloy. Materials Characterization, 109. pp. 189-197. ISSN 1044-5803

Sathiaraj, G D and Bhattacharjee, Pinaki Prasad and Tsai, Che-Wei and Yeh, Jien-Wei (2016) Effect of heavy cryo-rolling on the evolution of microstructure and texture during annealing of equiatomic CoCrFeMnNi high entropy alloy. Intermetallics, 69. pp. 1-9. ISSN 0966-9795

Sathiaraj, G D and Lee, C and Tsai, C W and Bhattacharjee, Pinaki Prasad (2015) Evolution of microstructure and crystallographic texture in severely cold rolled high entropy equiatomic CoCrFeMnNi alloy during annealing. IOP Conference Series: Materials Science and Engineering, 82. pp. 1-4. ISSN 1757-8981

Sathiaraj, G D and Tsai, C W and Yeh, J W and Jahazi, M and Bhattacharjee, Pinaki Prasad (2016) The effect of heating rate on microstructure and texture formation during annealing of heavily cold-rolled equiatomic CoCrFeMnNi high entropy alloy. Journal of Alloys and Compounds, 688 (B). pp. 752-761. ISSN 0925-8388

Seelam, Rajasekhar Reddy (2016) Effect of strain path on the evolution of microstructure and texture of equiatomic CoCrFeMnNi high entropy alloy. Masters thesis, Indian Institute of Technology Hyderabad.

Sharma, B (2013) Annealing Effects on Accumulative Roll Bonded Aluminium Laminates of Different Purities. Masters thesis, Indian Institute of Technology Hyderabad.

Sharma, A k and Gautam, A K and Sastry, D V K and Singh, S G (2011) Design & simulation of low loss 5-bit Ku band Switched line MEMS phase shifter on GaAs. In: International Conference on MEMS, NANO and Smart Systems, 4-6, November 2011, Kuala Lumpur; Malaysia.

Sharma, R K and Chouryal, Y N and Chaudhari, S and Saravanakumar, J and Dey, Suhash Ranjan and Ghosh, P (2017) Adsorption-Driven Catalytic and Photocatalytic Activity of Phase Tuned In2S3 Nanocrystals Synthesized via Ionic Liquids. ACS Applied Materials and Interfaces, 9 (13). pp. 11651-11661. ISSN 1944-8244

Simhambhatla, S and Karunakaran, K P and Chandrasekhar, U and Somashekara, M A (2013) A Study of the Mechanical Properties of Objects Built through Weld-Deposition. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. pp. 1-10. ISSN 0954-4054

Singh, Vajinder and Kumar, Atul and Mondal, Chandan and Bhattacharjee, Pinaki Prasad and Ghosal, P (2019) Hot deformation of high-Nb-containing γ-TiAl alloy in the temperature range of 1000–1200 °C: microstructural attributes to hot workability. SN Applied Sciences, 1 (4). ISSN 2523-3963

Singh, Vajinder and Mondal, Chandan and Bhattacharjee, Pinaki Prasad and Ghosal, P (2019) Microstructural Characterization by Automated Crystal Orientation and Phase Mapping by Precession Electron Diffraction in TEM: Application to Hot Deformation of a γ-TiAl-based Alloy. Microscopy and Microanalysis. pp. 1-9. ISSN 1431-9276

Singh, Vajinder and Mondal, Chandan and Kumar, Atul and Bhattacharjee, Pinaki Prasad and Ghosal, P (2019) High temperature compressive flow behavior and associated microstructural development in a β-stabilized high Nb-containing γ-TiAl based alloy. Journal of Alloys and Compounds. ISSN 0925-8388 (In Press)

Sreeparvathy, P C and V, Kanchana and G, Vaitheeswaran (2016) Thermoelectric properties of zinc based pnictide semiconductors. Journal of Applied Physics, 119 (085701). pp. 1-8. ISSN 0021-8979

Srilakshmi, R and M, Ramji and Chinthapenta, Viswanath (2015) Fatigue crack growth study of CFRP patch repaired Al 2014-T6 panel having an inclined center crack using FEA and DIC. Engineering Fracture Mechanics, 134. pp. 182-201. ISSN 0013-7944

Sugathan, Sandeep and Bhattacharya, Saswata (2019) Phase-Field Modelling of Evolution of Compact Ordered Precipitates in Ternary Alloy Systems. MRS Advances, 4 (25-26). pp. 1457-1463. ISSN 2059-8521

Sugathan, Sandeep and Bhattacharya, Saswata (2019) A Phase-Field Study of Elastic Stress Effects on Phase Separation in Ternary Alloy Systems. PhD thesis, Indian institute of technology Hyderabad.

Sunkari, Upender and Reddy, S R and Chatterjee, Subhradeep and Bhattacharjee, Pinaki Prasad (2019) Effect of prolonged aging on phase evolution and mechanical properties of intermetallic strengthened CoCrFeNi2.1Nbx high entropy alloys. Materials Letters, 248. pp. 119-122. ISSN 0167-577X

T

Talapatra, A and Arout Chelvane, J and Mohanty, Jyoti Ranjan (2017) Tuning magnetic microstructure in Gd-Fe thin films: Experiment and Simulation. Journal of Magnetism and Magnetic Materials, 448. pp. 360-366. ISSN 0304-8853 (In Press)

Tamboli, Rameez Rajmahammad (2016) Microstructure and Texture Analyses of Similar Welded Industrially Relevant Materials through Friction Stir Welding: D6AC Steel, AISI 316L Steel and Ti-6Al-4V Alloy. Masters thesis, Indian Institute of Technology Hyderabad.

Terse-Thakoor, Trupti and Badhulika, Sushmee and Mulchandani, Ashok (2017) Graphene based biosensors for healthcare. Journal of Materials Research, 32 (15). pp. 2905-2929. ISSN 0884-2914

Tsuji, N and Takatsuji, Y and Miyajima, Y and Bhattacharjee, Pinaki Prasad and Terada, D (2012) Stability of Cube oriented grains during cold-rolling of highly Cube-oriented polycrystalline nickel. Materials Science Forum, 702-3. pp. 402-405. ISSN 0255-5476

Tummala, Sharath Reddy and Bhattacharjee, Pinaki Prasad (2017) Severe Plastic Deformation Driven Nanostructure and Phase Evolution in a Dual-phase Al0.5 CoCrFeMnNi High Entropy Alloy. Masters thesis, Indian Institute of Technology Hyderabad.

U

Upadhyaya, M (2015) Fabrication of Epitaxial Thin Films by Pulsed Laser Deposition and Structural Studies of (Ba0.85Ca0.15)(Zr0.10Ti0.90)O3: a Lead Free Piezoelectric. Masters thesis, Indian Institute of Technology Hyderabad.

V

Vadnala, S and Asthana, Saket and Pal, Prem (2016) Investigation of near room temperature magnetocaloric, magnetoresistance and bolometric properties of Nd0.5La0.2Sr0.3MnO3: Ag2O manganites. Journal of Materials Science: Materials in Electronics, 27 (6). pp. 6156-6165. ISSN 0957-4522

Vasudevan, R and Karthik, T and Ganesan, S and Jayavel, R (2013) Effect of microwave sintering on the structural and densification behavior of sol-gel derived zirconia toughened alumina (ZTA) nanocomposites. Ceramics International, 39 (3). pp. 3195-3204. ISSN 0272-8842

Vasudevan, R and Karthik, T and Selvakumar, D and Ganesan, S and Jayavel, R (2014) Effect of microwave sintering on the structural, optical and electrical properties of BaTiO3 nanoparticles. Journal of Materials Science: Materials in Electronics, 25 (1). pp. 529-537. ISSN 0957-4522

Veerla, Raja Sekhar and Sahatiya, Parikshit and Badhulika, Sushmee (2017) Fabrication of a flexible UV photodetector and disposable photoresponsive uric acid sensor by direct writing of ZnO pencil on paper. Journal of Materials Chemistry C, 5 (39). pp. 10231-10240. ISSN 2050-7526

W

Wani, I S and Bhattacharjee, Pinaki Prasad (2018) PROCESSING, STRUCTURE AND MECHANICAL BEHAVIOR OF DUAL PHASE AND NANO-LAMELLAR EUTECTIC HIGH ENTROPY ALLOYS. PhD thesis, Indian Institute of Technology, Hyderabad.

Wani, I S and Bhattacharjee, T and Sheikh, S and Bhattacharjee, Pinaki Prasad and Guo, S and Tsuji, N (2016) Tailoring nanostructures and mechanical properties of AlCoCrFeNi2.1 eutectic high entropy alloy using thermo-mechanical processing. Materials Science and Engineering: A, 675. pp. 99-109. ISSN 0921-5093

Wani, I S and Bhattacharjee, T and Sheikh, S and Clark, I T and Park, M H and Okawa, T and Guo, S and Bhattacharjee, Pinaki Prasad and Tsuji, N (2017) Cold-rolling and recrystallization textures of a nano-lamellar AlCoCrFeNi2.1 eutectic high entropy alloy. Intermetallics, 84. pp. 42-51. ISSN 0966-9795

Wani, I S and Bhattacharjee, T and Sheikh, S and Lu, Y and Chatterjee, S and Guo, S and Bhattacharjee, Pinaki Prasad and Tsuji, N (2017) Effect of severe cold-rolling and annealing on microstructure and mechanical properties of AlCoCrFeNi2.1 eutectic high entropy alloy. IOP Conference Series: Materials Science and Engineering, 194. 012018. ISSN 1757-8981

Wani, I S and Bhattacharjee, T and Sheikh, S and Lu, Y P and Chatterjee, Subhradeep and Bhattacharjee, Pinaki Prasad and Guo, S and Tsuji, N (2016) Ultrafine-Grained AlCoCrFeNi2.1Eutectic High-Entropy Alloy. Materials Research Letters, 4 (3). pp. 174-179. ISSN 2166-3831

Wani, I S and Sathiaraj, G D and Ahmed, M Z and Reddy, S R and Bhattacharjee, Pinaki Prasad (2016) Evolution of microstructure and texture during thermo-mechanical processing of a two phase Al0.5CoCrFeMnNi high entropy alloy. Materials Characterization, 118. pp. 417-424. ISSN 1044-5803

Wu, Z and Raju, Gangadharan and Weaver, P (2017) Analysis and Design for the Moderately Deep Postbuckling Behavior of Composite Plates. Journal of Aircraft, 54 (1). pp. 327-335. ISSN 0021-8669

Y

Y, Rajkumar and Panigrahi, Bharat Bhooshan (2016) Sintering Mechanisms of Ultrafine Cr2AlC MAX Phase Powder. Materials Today Communications, 8. pp. 46-52. ISSN 2352-4928 (In Press)

Yadav, Brijesh Singh and Dey, Suhash Ranjan and Dhage, Sanjay R (2019) Effective ink-jet printing of aqueous ink for Cu (In, Ga) Se2 thin film absorber for solar cell application. Solar Energy, 179. pp. 363-370. ISSN 0038-092X

Yadav, Brijesh Singh and Dey, Suhash Ranjan and Dhage, Sanjay R. (2019) Role of selenium content in selenization of inkjet printed CIGSe2 thin film solar cell. In: 3rd International Conference on Optoelectronic and Nano Materials for Advanced Technology, icONMAT, 3-5 January 2019, Kerala, India.

Yebaji, Sushil Gyanoba (2015) Micro structure-Texture Evolution Studies on IMI 834 Titanium Alloy during High Pressure Torsion. Masters thesis, Indian Institute of Technology Hyderabad.

Yembadi, R and Bapurao, R and Akash, P A and Panigrahi, Bharat Bhooshan (2017) Nonisothermal sintering of Cr2AlC powder. International Journal of Applied Ceramic Technology, 14 (1). pp. 63-67. ISSN 1546-542X

Yembadi, Rajkumar (2017) Synthesis and Sintering Kinetics of Ultrafine Cr2AlC MAX Phase Powders. PhD thesis, Indian Insitute of Technology Hyderabad.

Z

Zaid, M and Bhattacharjee, Pinaki Prasad (2014) Electron backscatter diffraction study of deformation and recrystallization textures of individual phases in a cross-rolled duplex steel. Materials Characterization, 96. pp. 263-272. ISSN 1044-5803

Zaid, M and Bhattacharjee, Pinaki Prasad (2015) Microtexture of constituent phases in a heavily warm- rolled and annealed duplex stainless steel. In: 17th International Conference on Textures of Materials, 24-29 August, 2014, Dresden; Germany.

Zamin, Hasnat and Ramadurai, Ranjit (2017) Synthesis and studies of PVDF-BiFeO3 hybrid nano-composites for flexural piezoelectric applications. Masters thesis, Indian Insitute of Technology Hyderabad.

Zhang, H and Xing, Y and Gosalvez, M A and Pal, Prem and Sato, K (2015) Removal probability function for Kinetic Monte Carlo simulations of anisotropic etching of silicon in alkaline etchants containing additives. Sensors and Actuators A: Physical, 233. pp. 451-459. ISSN 0924-4247

This list was generated on Thu Aug 22 09:58:56 2019 IST.