Items where Subject is "Others > Metallurgy"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: A | B | C | D | E | G | H | I | J | K | M | P | R | S | T | U | V | W | Y | Z
Number of items at this level: 76.

A

A, Rajesh Kannan and N, Siva Shanmugam and Yasam, Palguna and et al, . (2023) Effect of double-side welding on the microstructural characteristics and mechanical performance of dissimilar AA6061-AA5052 aluminium alloys. Materials Letters, 331 (133444). pp. 1-4. ISSN 0167-577X

Ahmed, M Z (2014) Evolution of Microstructure and Crystallographic Texture during Thermo-Mechanical Processing by Warm-rolling In A Duplex Stainless Steel. PhD thesis, Indian Institute of Technology Hyderabad.

Ahmed, M Z and Bhattacharjee, Pinaki Prasad (2015) Evolution of microstructure and texture during isothermal annealing of a heavily warm-rolled duplex steel. Isij International, 54 (12). pp. 2844-2853. ISSN 0915-1559

Akkisetty, B (2014) Molybdenum Oxide and Tin Oxide/Sulfide Nanostructured Materials for Anodes in Lithium Ion Batteries. PhD thesis, Indian Institute of Technology, Hyderabad.

Anand, Divya and Khandelwal, Mudrika (2015) Conducting flexible paper based on Bacterial cellulose and Polyaniline composites. Masters thesis, Indian Institute of Technology Hyderabad.

Anandkumar, Mariappan and Bagul, Pratik Mahendra and Deshpande, Atul Suresh (2020) Structural and luminescent properties of Eu3+ doped multi-principal component Ce0.2Gd0.2Hf0.2La0.2Zr0.2O2 nanoparticles. Journal of Alloys and Compounds, 838 (155595). ISSN 09258388

B

B, Mallesham and B, Viswanath and Ramadurai, Ranjit (2016) Effect of crystal structure and cationic order on phonon modes across ferroelectric phase transformation in Pb(Fe0.5-xScxNb0.5)O3 bulk ceramics. AIP Advances, 6 (1). pp. 1-8. ISSN 2158-3226

Bhar, Madhushri and Dey, Avishek and Ghosh, Sourav and van Spronsen, Matthijs A. and Selvaraj, Vimalnath and Kaliprasad, Y. and Krishnamurthy, Satheesh and Martha, Surendra Kumar (2022) Plasma jet printing induced high-capacity graphite anodes for sustainable recycling of lithium-ion batteries. Carbon, 198. pp. 401-410. ISSN 0008-6223

Bhattacharjee, Pinaki Prasad and Ray, R K and Tsuji, N (2010) Evolution of deformation and recrystallization textures in high-purity Ni and the Ni-5 at. pct W alloy. Metallurgical and Materials Transactions A, 41 (11). pp. 2856-2870. ISSN 1073-5623

C

Chatterjee, Subhradeep and Abinandanan, T A and Reddy, G M and Chattopadhyay, K (2016) Microstructure Formation in Dissimilar Metal Welds: Electron Beam Welding of Ti/Ni. Metallurgical and Materials Transactions A, 47 (2). pp. 769-776. ISSN 1073-5623

Chaudhari, S and Kannan, P K and Dey, Suhash Ranjan (2016) Effects of triethanolamine on the formation of CZTS films using a simple dip coating technique. In: IEEE 43rdPhotovoltaic Specialists Conference (PVSC), 5-10 June 2016.

Chaudhari, S and Kannan, P K and Dey, Suhash Ranjan (2016) Investigation of optimum annealing parameters for formation of dip coated Cu2ZnSnS4 thin film. Thin Solid Films, 612. pp. 456-462. ISSN 0040-6090

Chaudhari, S and Palli, S and Kannan, P K and Dey, Suhash Ranjan (2016) Pulsed electrodeposition of Cu2ZnSnS4 absorber layer precursor for photovoltaic application. Thin Solid Films, 600. pp. 169-174. ISSN 0040-6090

Choudhary, Amit and Sadhu, Abhijit and Sarkar, Sagar and Nath, Ashish Kumar and Muvvala, Gopinath (2020) Laser surface polishing of NiCrSiBC – 60WC ceramic-metal matrix composite deposited by laser directed energy deposition process. Surface and Coatings Technology, 404 (126480). pp. 1-11. ISSN 0257-8972

D

Das, Asim and V, Kanchana (2014) Understanding Thermoelectric Properties from Density Functional Theory. Masters thesis, Indian Institute of Technology, Hyderabad.

Dey, Suhash Ranjan and Hollang, L and Beausir, B and Hieckmann, E and Skrotzki, W (2013) Reprint of: Shear banding in sub-microcrystalline nickel at 4 K. Mechanics of Materials, 67. pp. 53-58. ISSN 0167-6636

Dhanabal, Rengasamy and Dey, Suhash Ranjan (2022) Perovskite solar cells: recent progress and strategies developed for minimizing interfacial recombination. Higher Education Press Limited Company.

E

Eleti, Rajeshwar Reddy (2015) Hot deformation behavior of CrMnFeCoNi equiatomic FCC High Entropy Alloy. Masters thesis, Indian Institute of Technology Hyderabad.

Equbal, A (2015) Synthesis and Sintering Kinetics of Mechanically Alloyed FeCrCoMnNi High Entropy Alloy Powders. Masters thesis, Indian Institute of Technology Hyderabad.

G

G D, Sathiaraj and Bhattacharjee, Pinaki Prasad (2015) Effect of starting grain size on the evolution of microstructure and texture during thermo-mechanical processing of CoCrFeMnNi high entropy alloy. Journal of Alloys and Compounds, 647. pp. 82-96. ISSN 0925-8388

Gatti, J R and Bhattacharjee, Pinaki Prasad (2014) Annealing textures of severely cold and warm-rolled Al-2.5 wt.%Mg alloy. Journal of Alloys and Compounds, 615. pp. 950-961. ISSN 0925-8388

Gatti, J R and Bhattacharjee, Pinaki Prasad (2015) Effect of Prior Recovery Treatment on the Evolution of Cube Texture During Annealing of Severely Warm-Rolled Al-2.5 wt pctMg Alloy. Metallurgical and Materials Transactions A, 46 (11). pp. 4966-4977. ISSN 1073-5623

Gatti, J R and Bhattacharjee, Pinaki Prasad (2015) Evolution of microstructure and texture during annealing of Al-2.5%Mg-0.2%Sc severely deformed by a combination of accumulative roll bonding (ARB) and conventional rolling. In: 17th International Conference on Textures of Materials, 24-29 August, 2014, Dresden; Germany.

H

Hassanpour, A. and Vaidya, M. and Divinski, S.V. and Wilde, G. (2021) Impact of cryogenic cycling on tracer diffusion in plastically deformed Pd40 Ni40 P20 bulk metallic glass. Acta Materialia, 209 (116785). pp. 1-10. ISSN 13596454

I

IIT, Hyderabad (2021) (Issue 5, Jan 2021) IITH Japan Connect. Other. IITH.

J

J R, Gatti and Bhattacharjee, Pinaki Prasad (2015) Nucleation behavior and formation of recrystallization texture in pre-recovery treated heavily cold and warm-rolled Al–2.5 wt.%Mg alloy. Materials Characterization, 106. pp. 141-151. ISSN 1044-5803

Jana, Apu Kumar and Raja, M. Manivel and Chelvane, J. Arout and Jammalamadaka, S Narayana (2022) Thickness-Dependent Magnetostatic Interactions and Domain State Configuration in Fe2CoSi Thin Films–FORC Analysis. IEEE Transactions on Magnetics, 58 (1). pp. 1-6. ISSN 0018-9464

Jogi, T and Bhattacharya, Saswata (2016) Evolution of Interfacial Dislocation Networks in Particle-Strengthened Alloy Systems During High Temperature Creep: A Discrete Dislocation Dynamics Study. Transactions of the Indian Institute of Metals, 69 (2). pp. 507-512. ISSN 0972-2815

Jose, M J and Kumar, S S and Sharma, Abhay (2016) Vibration assisted welding processes and their influence on quality of welds. Science and Technology of Welding and Joining, 21 (4). pp. 243-258. ISSN 1362-1718

Joshi, A M (2014) Sintering Kinetics of Cr2AlC Powder. Masters thesis, Indian Institute of Technology, Hyderabad.

K

Karati, Anirudha and Ghosh, Sanyukta and Nagini, M. and Mallik, Ramesh Chandra and Shabadi, Rajashekhara and Murty, B S and et al, . (2022) Thermoelectric properties of nanocrystalline half-Heusler high-entropy Ti2NiCoSn1−xSb1+x (x = 0.3, 0.5, 0.7, 1) alloys with VEC > 18. Journal of Alloys and Compounds, 927. pp. 1-9. ISSN 0925-8388

Karre, R and Niranjan, M K and Dey, Suhash Ranjan (2015) First principles theoretical investigations of low Young's modulus beta Ti-Nb and Ti-Nb-Zr alloys compositions for biomedical applications. Materials Science and Engineering: C, 50. pp. 52-58. ISSN 0928-4931

Khan, N (2014) Effect of Solution-Hardening on the Evolution of Nanostructure in Ni-Fe alloys during Severe Plastic Deformation by High Pressure Torsion. Masters thesis, Indian Institute of Technology, Hyderabad.

Kodli, B K and Saxena, K K and Dey, Suhash Ranjan and Pancholi, V and Bhattacharjee, A (2015) Texture studies of hot compressed near alpha titanium alloy (IMI 834) at 1000°C with different strain rates. In: 17th International Conference on Textures of Materials, 24-29 August, 2014, Dresden; Germany.

Kolanu, Naresh Reddy (2016) Material Characterisation at Elevated Temperatures Involving Digital Image Correlation (DIC). Masters thesis, Indian Institute of Technology Hyderabad.

Kumar, Abhinav and Asthana, Saket (2015) Synthesis and characterization of BaTiO3/CoFe2O4 bulk magneto-electric composite system. Masters thesis, Indian Institute of Technology Hyderabad.

Kumar, K B and Saxena, K K and Dey, Suhash Ranjan and Pancholi, V and Bhattacharjee, A (2017) Processing map-microstructure evolution correlation of hot compressed near alpha titanium alloy (TiHy 600). Journal of Alloys and Compounds, 691. pp. 906-903. ISSN 0925-8388

M

Maharana, H S and Akarapu, A and Pal, S and Basu, A (2016) Surface-Mechanical Properties of Electrodeposited Cu-Al2O3 Composite Coating and Effects of Processing Parameters. Metallurgical and Materials Transactions A, 47 (1). pp. 388-399. ISSN 1073-5623

Mandati, S (2015) Fabrication of CuInSe2 and Cu(In,Ga)Se2 Absorber Layers by Pulse- and Pulse-reverse Electrochemical Techniques for Solar Photovoltaic Applications. PhD thesis, Indian Institute of Technology Hyderabad.

Mandati, S and Bulusu, V S and Dey, Suhash Ranjan and Joshi, S V (2015) Enhanced photoresponse of Cu(In,Ga)Se2 /CdS heterojunction fabricated using economical non-vacuum methods. Electronic Materials Letters, 11 (4). pp. 618-624. ISSN 2093-6788

Mandi, Soumen (2016) Studies on attaining 0.5(Ba0.7Ca0.3TiO3) -0.5(BaZr0.2Ti0.8O3) morphotrophic composition through multilayer approach. Masters thesis, Indian Institute of Technology Hyderabad.

Mane, R B (2014) Effect of Additives on Sintering Of Ti3SiC2 Powder. Masters thesis, Indian Institute of Technology, Hyderabad.

Manivannan, A and S K, Myana and Miriyala, K and Sahu, S and Ramadurai, R (2014) Low power ovonic threshold switching characteristics of thin GeTe6 films using conductive atomic force microscopy. Applied Physics Letters, 105 (243501). pp. 1-5. ISSN 0003-6951

Mannepalli, Venkateswara Rao and Raghunathan, R and Ramadurai, Ranjit (2017) Local structural distortion and interrelated phonon mode studies in yttrium chromite. Journal of Materials Research, 32 (8). pp. 1541-1547. ISSN 0884-2914

Mannepalli, Venkateswara Rao and Ramadurai, Ranjit (2016) Studies on Local Structural Inhomogeneity and Origin of Ferroelectricity in Yttrium chromite Ceramics. MRS Advances, 1 (9). pp. 609-614. ISSN 2059-8521

Meghwal, Ashok and Anupam, Ameey and Schulz, Christiane and Hall, Colin and Murty, B S and et al, . (2022) Tribological and corrosion performance of an atmospheric plasma sprayed AlCoCr0.5Ni high-entropy alloy coating. Wear, 506-50. pp. 1-15. ISSN 0043-1648

P

Palli, S and Hamann, S and Wambach, M and Ludwig, A and Dey, Suhash Ranjan (2015) Fabrication of a Ni-Cu Thin Film Material Library Using Pulsed Electrodeposition. Journal of The Electrochemical Society, 161 (10). D504-D509. ISSN 0013-4651

Palli, Srinivas (2016) Theoretical and Experimental Studies of Single Metals (Cu and Ni) and Binary Ni-Cu alloy Electrodeposition in a Modified Hull cell: A Combinatorial Approach. PhD thesis, Indian Institute of Technology Hyderabad.

Panda, J. P. and Arya, P. and Guruvidyathri, K. and Ravikirana, . and Murty, B S (2021) Studies on Kinetics of BCC to FCC Phase Transformation in AlCoCrFeNi Equiatomic High Entropy Alloy. Metallurgical and Materials Transactions A, 52 (5). pp. 1679-1688. ISSN 1073-5623

Pfetzing-Micklich, J and Brinckmann, S and Dey, Suhash Ranjan and Otto, F and Hartmaier, A and Eggeler, G (2011) Micro-shear deformation of pure copper. Materials Science and Engineering Technology / Materialwissenschaft und Werkstofftechnik, 42 (3). pp. 219-223. ISSN 0933-5137

R

R, Manivannan (2016) Gelcasting of High Temperature Radome Materials by Using Inorganic Binders. PhD thesis, Indian Institute of Technology Hyderabad.

Ram, S and Chauhan, M R and Agarwal, K and V, Kanchana (2011) Ab initio study of Heusler alloys Co2XY (X = Cr, Mn, Fe; Y = Al, Ga) under high pressure. Philosophical Magazine Letters, 91 (8). pp. 545-556. ISSN 0950-0839

Reddy, N S and Panigrahi, Bharat Bhooshan and Ho, C M and Kim, J H and Lee, C S (2015) Artificial neural network modeling on the relative importance of alloying elements and heat treatment temperature to the stability of α and β phase in titanium alloys. Computational Materials Science, 107. pp. 175-183. ISSN 0927-0256 (In Press)

Reddy, S R and Ahmed, M Z and Sathiaraj, G D and Bhattacharjee, Pinaki Prasad (2017) Effect of strain path on microstructure and texture formation in cold-rolled and annealed FCC equiatomic CoCrFeMnNi high entropy alloy. Intermetallics, 87. pp. 94-103. ISSN 0966-9795

S

S S, Satheesh Kumar and T, Raghu and Bhattacharjee, Pinaki Prasad and G, Appa Rao and Borah, U (2015) Constitutive modeling for predicting peak stress characteristics during hot deformation of hot isostatically processed nickel-base superalloy. Journal of Materials Science: Materials in Electronics, 50 (19). pp. 6444-6456. ISSN 0022-2461

S S, Satheesh Kumar and T, Raghu and Bhattacharjee, Pinaki Prasad and G, Appa Rao and Borah, U (2016) Strain rate dependent microstructural evolution during hot deformation of a hot isostatically processed nickel base superalloy. Journal of Alloys and Compounds, 681 (5). pp. 28-42. ISSN 0925-8388

Satheesh Kumar, S S and T, Raghu and Bhattacharjee, Pinaki Prasad and G, Appa Rao and Borah, U (2017) Work hardening characteristics and microstructural evolution during hot deformation of a nickel superalloy at moderate strain rates. Journal of Alloys and Compounds, 709. pp. 394-409. ISSN 0925-8388

Sathiaraj, G D and Ahmed, M Z and Bhattacharjee, Pinaki Prasad (2016) Microstructure and texture of heavily cold-rolled and annealed fcc equiatomic medium to high entropy alloys. Journal of Alloys and Compounds, 664. pp. 109-119. ISSN 0925-8388

Sathiaraj, G D and Bhattacharjee, Pinaki Prasad (2015) Effect of cold-rolling strain on the evolution of annealing texture of equiatomic CoCrFeMnNi high entropy alloy. Materials Characterization, 109. pp. 189-197. ISSN 1044-5803

Sathiaraj, G D and Bhattacharjee, Pinaki Prasad and Tsai, Che-Wei and Yeh, Jien-Wei (2016) Effect of heavy cryo-rolling on the evolution of microstructure and texture during annealing of equiatomic CoCrFeMnNi high entropy alloy. Intermetallics, 69. pp. 1-9. ISSN 0966-9795

Sathiaraj, G D and Lee, C and Tsai, C W and Bhattacharjee, Pinaki Prasad (2015) Evolution of microstructure and crystallographic texture in severely cold rolled high entropy equiatomic CoCrFeMnNi alloy during annealing. IOP Conference Series: Materials Science and Engineering, 82. pp. 1-4. ISSN 1757-8981

Sathiaraj, G D and Tsai, C W and Yeh, J W and Jahazi, M and Bhattacharjee, Pinaki Prasad (2016) The effect of heating rate on microstructure and texture formation during annealing of heavily cold-rolled equiatomic CoCrFeMnNi high entropy alloy. Journal of Alloys and Compounds, 688 (B). pp. 752-761. ISSN 0925-8388

Sathiraj, G Dan (2016) Development of Microstructure and Crystalographic texture during thermo-Mechanical Processing of Equiatomic CoCrFeMnNi High Entropy Alloy. PhD thesis, Indian Institute of Technology Hyderabad.

Singh, Vajinder and Mondal, Chandan and Sharma, Aditya R. and Kumar, Atul and Bhattacharjee, Pinaki Prasad and et al, . (2021) Hot Deformation Behavior of γ-TiAl-Based Ti–45Al–8Nb–6Cr–0.2B Alloy in the γ + β Phase Field. In: Applications of Microscopy in Materials and Life Sciences. Springer Nature, pp. 135-144.

Srinivasa Reddy, P and Hamann, S and Wambach, M and Kieschnick, M and Ludwig, A and Dey, S R (2013) Development of Ni-Cu materials library by using combinatorial pulsed electrodeposition. Transactions of the Indian Institute of Metals, 66 (4). pp. 429-432. ISSN 0972-2815

Srinivasa Reddy, P V and V, Kanchana (2014) Ab initio study of Fermi surface and dynamical properties of Ni 2XAl (X = Ti, V, Zr, Nb, Hf and Ta). Journal of Alloys and Compounds, 616. pp. 527-534. ISSN 0925-8388

T

Tamboli, Rameez R. and Dudala, Srinivas and Andersen, Dustin and Valle, Nathalie and Eswara, Santhana and Korla, Rajesh and Dey, Suhash Ranjan and et al, . (2022) Quantitative prediction of Al and learning grain boundary character in Al-rich interstitial free steel. Scripta Materialia, 219. pp. 1-5. ISSN 1359-6462

Tamboli, Rameez R. and Guennec, Benjamin and Fujiwara, Hiroshi and Ameyama, Kei and Bhattacharya, Basudev and Dey, Suhash Ranjan (2022) Fostering deep drawability through recrystallization texture strengthening in aluminum-rich interstitial free steel. Materials Characterization, 193. pp. 1-12. ISSN 1044-5803

Tamboli, Rameez Rajmahammad (2016) Microstructure and Texture Analyses of Similar Welded Industrially Relevant Materials through Friction Stir Welding: D6AC Steel, AISI 316L Steel and Ti-6Al-4V Alloy. Masters thesis, Indian Institute of Technology Hyderabad.

U

Upadhyaya, M (2015) Fabrication of Epitaxial Thin Films by Pulsed Laser Deposition and Structural Studies of (Ba0.85Ca0.15)(Zr0.10Ti0.90)O3: a Lead Free Piezoelectric. Masters thesis, Indian Institute of Technology Hyderabad.

V

Vadnala, S and Pal, Prem and Asthana, S (2015) Influence of A-site cation disorder on structural and magnetocaloric properties of Nd0.7–xLaxSr0.3MnO3 (x=0.0, 0.1, 0.2 & 0.3). Journal of Rare Earths, 33 (10). pp. 1072-1080. ISSN 1002-0721

W

Wani, I S and Bhattacharjee, T and Sheikh, S and Bhattacharjee, Pinaki Prasad and Guo, S and Tsuji, N (2016) Tailoring nanostructures and mechanical properties of AlCoCrFeNi2.1 eutectic high entropy alloy using thermo-mechanical processing. Materials Science and Engineering: A, 675. pp. 99-109. ISSN 0921-5093

Wani, I S and Bhattacharjee, T and Sheikh, S and Clark, I T and Park, M H and Okawa, T and Guo, S and Bhattacharjee, Pinaki Prasad and Tsuji, N (2017) Cold-rolling and recrystallization textures of a nano-lamellar AlCoCrFeNi2.1 eutectic high entropy alloy. Intermetallics, 84. pp. 42-51. ISSN 0966-9795

Wani, I S and Sathiaraj, G D and Ahmed, M Z and Reddy, S R and Bhattacharjee, Pinaki Prasad (2016) Evolution of microstructure and texture during thermo-mechanical processing of a two phase Al0.5CoCrFeMnNi high entropy alloy. Materials Characterization, 118. pp. 417-424. ISSN 1044-5803

Y

Yebaji, Sushil and Saurav, Ayush and Chauhan, Pranjal and Murty, B S and et al, . (2022) Phase Stability of AlCoTiZn High-Entropy Alloy Prepared by Mechanical Alloying. Journal of Materials Engineering and Performance. ISSN 1059-9495

Z

Zaid, M and Bhattacharjee, Pinaki Prasad (2015) Microtexture of constituent phases in a heavily warm- rolled and annealed duplex stainless steel. In: 17th International Conference on Textures of Materials, 24-29 August, 2014, Dresden; Germany.

This list was generated on Tue Mar 19 11:11:26 2024 IST.