# Items where Subject is "Physics > Mechanical and aerospace"

Up a level |

- IIT Hyderabad Research Areas (110)
- Physics (110)
**Mechanical and aerospace**(110)

- Physics (110)

**108**.

## A

A, Bhagat and Mopuru, D R and Dongari, Nishanth and Saraswat, V K
(2015)
*Effect of Nozzle Divergence Angle on Plume Expansion In
Outer-Space Conditions.*
In: Proceedings of the 23rd National Heat and Mass Transfer Conference AND 1st International ISHMT-ASTFE Heat and Mass Transfer Conference IHMTC201, 17-20 December, 2015, Thiruvananthapuram, India.

A, Saket Chandra
(2016)
*Development of a General-Purpose Compressible Flow AnuPravaha Based Solver using an Implicit Method (Fluids and Energy Systems).*
Masters thesis, Indian Institute of Technology Hyderabad.

Adinarayanappa, S M and M, Naveenkumar and Kumar, A and Chinthapenta, Viswanath
(2016)
*Thermo-Mechanical Modelling of Arc Welding.*
In: Globalization in Joining Technology and Material Science, JWRI Osaka University, Japan.

Ahsan, Zaid and Anwar, Sadath and Uchida, T K and Vyasarayani, C P
(2015)
*Galerkin–Arnoldi algorithm for stability analysis of time-periodic delay differential equations.*
Nonlinear Dynamics, 82 (4).
pp. 1893-1904.
ISSN 0924-090X

Ahsan, Zaid and Uchida, T and Vyasarayani, C P
(2015)
*Galerkin approximations with embedded boundary conditions for retarded delay differential equations.*
Mathematical and Computer Modelling of Dynamical Systems, 21 (6).
pp. 560-572.
ISSN 1387-3954
(In Press)

Amogh, R N and Mahanta, T K and B, Venkatesham
(2016)
*Structural-acoustic coupling of circular membrane backed by cylinder cavity using mode coupling approach.*
In: 2nd Australasian Acoustical Societies Conference, ACOUSTICS, 9-11, November 2016, Brisbane; Australia.

Angwani, Vikas
(2017)
*Numerical investigation of deformation and evaporation of a volatile ethanol droplet under high-temperature conditions.*
Masters thesis, Indian Institute of Technology Hyderabad.

Anwar, Sadath and Dixit, Harish Nagaraj and Vyasarayani, Chandrika Prakash
(2016)
*Dynamics of Cross-Flow Heat Exchanger Tubes With Multiple Loose Supports.*
Journal of Pressure Vessel Technology, 138 (5).
051303-1.
ISSN 0094-9930

Anwar, Sadath and Vyasarayani, C P
(2015)
*Galerkin approximations for stability of delay differential equations with time periodic delays.*
Journal of Computational and Nonlinear Dynamics, 10 (6).
pp. 1-7.
ISSN 1555-1415

Anwar Sadath, K T and Vyasarayani, C P
(2015)
*Galerkin approximations for stability of delay differential equations with time periodic coefficients.*
Journal of Computational and Nonlinear Dynamics, 10 (2).
pp. 1-14.
ISSN 1555-1415

Anwar Sadath, K T
(2016)
*Galerkin Approximation for Stability of Delay Differential Equations.*
PhD thesis, Indian Institute of Technology Hyderabad.

## B

B, Venkatesham and Tiwari, M and V, Aishwarya
(2014)
*Effect of Micro-Pitting on Gear Vibrations and Dynamic Excitation Source.*
Journal of Vibration Engineering & Technologies, 2 (1).
pp. 53-58.

Banerjee, Raja
(2013)
*Numerical investigation of evaporation of a single ethanol/iso-octane droplet.*
Fuel, 107.
pp. 724-739.
ISSN 0016-2361

Banerjee, Raja and Gopinath, R
(2011)
*CFD analysis to study evaporation of a single ETHANOL/ISO-octane binary mixture droplet.*
In: ASME-JSME-KSME 2011 Joint Fluids Engineering Conference, AJK 2011, 24-29, July 2011, Hamamatsu; Japan.

Banerjee, Raja and Gopinath, R
(2012)
*Numerical study of heat and mass transfer in evaporating multiple droplets composed of binary mixture of ethanol and isooctane.*
In: International Mechanical Engineering Congress and Exposition, 9-15, November 2012, Houston, TX; United States.

Banerjee, Raja and Kumar, Santosh
(2016)
*Numerical Investigation of Stratified Air/Fuel Mixture Preparation in a GDI Engine.*
Applied Thermal Engineering, 104.
pp. 414-428.
ISSN 1359-4311

Bansal, A and Lingam, R and Yadav, S K and Reddy, N V
(2017)
*Prediction of forming forces in single point incremental forming.*
Journal of Manufacturing Processes, 28 (3-SI).
pp. 486-193.
ISSN 1526-6125

## C

Chaganti, N S and Brooker, B T and Olcmen, S M and Kolhe, Pankaj
(2017)
*Frequency analysis of oblique shock wave boundary layer interaction.*
In: 55th AIAA Aerospace Sciences Meeting, Grapevine, Texas.

Chandran, Navaneeth T
(2017)
*Detecting and locating delamination in stiffened panels using 3D digital image correlation technique.*
Masters thesis, Indian Institute of Technology Hyderabad.

Chelimilla, Sneha
(2017)
*Phononic Bandgaps in Two-Dimensional Periodic Structures.*
Masters thesis, Indian Institute of Technology Hyderabad.

Choudhury, Sanatan and Sharma, Abhay and Mohanty, Uttam Kumar and Kasai, Ryu and Komura, Masaharu and Tanaka, Manabu and Suga, Tetsuo
(2017)
*Mathematical model of complex weld penetration profile: A case of square AC waveform arc welding.*
Journal of Manufacturing Processes, 30.
pp. 483-491.
ISSN 1526-6125

## D

D, Veerababu and B, Venkatesham
(2017)
*Three-dimensional acoustic analysis of concentric tube resonator using green's function.*
In: 24th International Congress on Sound and Vibration (ICSV), 23-27 July, 2017, London; United Kingdom.

De, A K and Eswaran, Vinayak
(2017)
*Scalings of heat transport and energy spectra of turbulent Rayleigh-Benard convection in a large-aspect-ratio box.*
International Journal of Heat and Fluid Flow, 67.
pp. 111-124.
ISSN 0142-727X

Dirbude, S and Eswaran, Vinayak and Kushari, A
(2012)
*Droplet vaporization modeling of rapeseed and sunflower methyl esters.*
Fuel, 92 (1).
pp. 171-179.
ISSN 0016-2361

Dirbude, S and Eswaran, Vinayak and Kushari, A
(2011)
*Numerical Modelling of Droplet Evaporation with Convection for N-Alkanes and Kerosene Fuel.*
Atomization and Sprays, 21 (9).
pp. 787-798.
ISSN 1044-5110

Duryodhan, V S and Singh, Shiv Govind and Agarwal, Anil
(2017)
*Effect of Cross Aspect Ratio on Flow in Diverging and Converging Microchannels.*
Journal of Fluids Engineering, 139 (6).
061203.
ISSN 0098-2202

## E

Edara, Satyavardhana Rao
(2017)
*Numerical and Experimental Evaluation of Lamb Wave
Dispersion curves in Composite Laminates.*
Masters thesis, Indian Institute of Technology Hyderabad.

## G

G, Pradeep and T, Thanigaivel Raja and D, Veerababu and B, Venkatesham
(2017)
*Numerical Prediction of Perforated tube acoustic impedance.*
In: 24th International Conference on Sound and Vibration, London, 23-27 July, 2017.

Gajbhiye, N and Eswaran, Vinayak and Saha, A K and Kumar, A
(2015)
*Numerical calculation of particle collection efficiency in an electrostatic precipitator.*
Sadhana, 40 (3).
pp. 863-873.
ISSN 0256-2499

Gangele, A and Sharma, Chandra Shekhar and Pandey, Ashok Kumar
(2017)
*Synthesis of Patterned Vertically Aligned Carbon Nanotubes
by PECVD Using Different Growth Techniques : A Review.*
Journal of Nanoscience and Nanotechnology, 17.
pp. 1-18.
ISSN 1533-4880
(In Press)

Gopalan, K S and Eswaran, Vinayak
(2016)
*Numerical investigation of thermal performance of PCM based heat sink using structured porous media as thermal conductivity enhancers.*
International Journal of Thermal Sciences, 104.
pp. 266-280.
ISSN 1290-0729

## H

Hoskoti, L and Misra, A and Sucheendran, M
(2017)
*Interaction of nonlinear normal modes of a cantilever beam.*
In: 24th International Congress on Sound and Vibration (ICSV), 23-27 July, 2017, London; United Kingdom.

## I

IIT, Hyderabad
(2017)
*My Home firm ties up with IIT-H startup.*
The Hindu, Hyderabad.

## J

Jadhav, Aakash
(2017)
*Sound Radiation Due To Impacted Plates.*
Masters thesis, Indian Instiute of Technology Hyderabad.

Jadhav, Pramod D
(2017)
*Uncertainty estimations in external flow using Computational fluid Dynamics (CFD).*
Masters thesis, Inidian Institute of Technology Hyderabad.

Jadon, V and Agawane, G and Baghel, A and B, Venkatesham and Banerjee, Raja and Getta, A and Viswanathan, H and Awasthi, A
(2014)
*An Experimental and Multiphysics Based Numerical Study to Predict Automotive Fuel Tank Sloshing Noise.*
In: 2014 SAE World Congress, April, Detroit, MI, USA.

Jaiswal, S and Dongari, Nishanth
(2015)
*Implementation of Knudsen Layer Effects In Open Source CFD Solver for Effective Modeling of Microscale Gas Flows.*
In: Proceedings of the 23rd National Heat and Mass Transfer Conference and 1st International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC), 17-20 December, 2015, Thiruvananthapuram, India.

Jaiswal, S and Reddy, R and Banerjee, Raja and Sato, S and Komagata, D and Ando, M and Okada, J
(2017)
*An efficient GPU parallelization for arbitrary collocated polyhedral finite volume grids and its application to incompressible fluid flows.*
In: International Conference on High Performance Computing Workshops, HiPCW, 19-22 December 2016, Hyderabad; India.

Janardhan, V and R, Prasanth Kumar
(2017)
*Online trajectory generation for wide ditch crossing of biped robots using control constraints.*
Robotics and Autonomous Systems.
ISSN 0921-8890
(In Press)

## K

K, Sobhith
(2017)
*Study of Delamination, Matrix/fiber damage in CFRP under bending using Acoustic Emission and Cohensive Zone technique.*
Masters thesis, Indian Institute of Technology Hyderabad.

K P, Karunakaran and Simhambhatla, S and U, Chandrasekhar and A, Bernard
(2016)
*Hybrid rapid manufacturing of metallic objects.*
International Journal of Rapid Manufacturing, 1 (4).
p. 2016.
ISSN 1757-8817

Kaira, Shankar Singh
(2017)
*CFD Modeling of Non-premixed Combustion Inside a Diesel Engine.*
Masters thesis, Indian Insitute of Technology Hyderabad.

Kambali, P N and Nikhil, V S and Pandey, Ashok Kumar
(2017)
*Surface and nonlocal effects on response of linear and nonlinear NEMS devices.*
Applied Mathematical Modelling, 43.
pp. 252-267.
ISSN 0307-904X

Kambali, P N and Pandey, Ashok Kumar
(2016)
*Nonlinear coupling of transverse modes of a fixed–fixed microbeam under direct and parametric excitation.*
Nonlinear Dynamics, 87 (2).
pp. 1271-1294.
ISSN 0924-090X

Kambali, P N and Swain, G and Pandey, Ashok Kumar
(2016)
*Frequency Analysis of Linearly Coupled Modes of MEMS Arrays.*
Journal of Vibration and Acoustics, 138 (2).
pp. 1-9.
ISSN 1048-9002

Kambali, P N and Swain, G and Pandey, Ashok Kumar and Buks, E and Gottlieb, O
(2015)
*Coupling and tuning of modal frequencies in direct current biased microelectromechanical systems arrays.*
Applied Physics Letters, 107 (063104).
pp. 1-6.
ISSN 0003-6951

Kandala, Shanti Swaroop and Maduri, Abhivamshi and Vyasarayani, C P
(2017)
*Galerkin Approximations for Thermoacoustic Instability in a Rijke's Tube.*
Procedia IUTAM, 22.
pp. 168-175.
ISSN 2210-9838

Kandan, K and Khaderi, Syed Nizamuddin and Wadley, H N G and Deshpande, V S
(2017)
*Surface instabilities in shock loaded granular media.*
Journal of the Mechanics and Physics of Solids, 109.
pp. 217-240.
ISSN 0022-5096

Keskar, Harshad and B, Venkatesham
(2017)
*Transmission loss characteristics of an annular cavity with arbitrary port locations using Green's function method.*
The Journal of the Acoustical Society of America, 142 (3).
pp. 1350-1361.
ISSN 0001-4966

Khaderi, Syed Nizamuddin and Scherer, M R J and Hall, C E and Steiner, U and Ramamurty, U and Fleck, N A and Deshpande, V S
(2017)
*The indentation response of Nickel nano double gyroid lattices.*
Extreme Mechanics Letters, 10.
pp. 15-23.
ISSN 23524316

Kumar, P and Eswaran, Vinayak
(2013)
*The effect of radiation on natural convection in slanted cavities of angle γ = 45° and 60°.*
International Journal of Thermal Sciences, 67.
pp. 96-106.
ISSN 1290-0729

## M

M Adinarayanappa, S and Simhambhatla, S and Campbell, R. Ian and Gibson, Ian
(2017)
*Twin-wire welding based additive manufacturing (TWAM): manufacture of functionally gradient objects.*
Rapid Prototyping Journal, 23 (5).
pp. 858-868.
ISSN 1355-2546

Mahato, Uttam Kumar
(2017)
*Optimal energy consumption of a biped robotfor crossing a wide ditch.*
Masters thesis, Indian Insitute of Technology Hyderabad.

Matur, Vinayak S
(2016)
*Heat Transfer Modelling of AC Waveform Submerged Arc Welding Process.*
Masters thesis, Indian Institute of Technology Hyderabad.

Md, Yousuf Ahmed and Appam, N and Md, Nayeemuddin and Md, Ahmed and Md, Abdullah
(2017)
*Design and Simulation of Solar Car.*
International Journal of Scientific Research in Science, Engineering and Technology, 3 (2).
pp. 373-377.
ISSN 2395 - 1990

Meng, J and Dongari, Nishanth and Reese, J M and Zhang, Y
(2014)
*Breakdown parameter for kinetic modeling of multiscale gas flows.*
Physical Review E, 89 (6).
063305-1.
ISSN 1539-3755

Mudhangulla, Sridhar Babu
(2017)
*Study of Stick-Slip in a Torsional Drill bit Using Neutral Delay Differential Equations.*
Masters thesis, Indian Institute of Technology Hyderabad.

Murugesan, Meenatchidevi and B, Saravanan and Hochgreb, Simone and Li, Larry K B
(2017)
*Recurrence analysis of forced synchronization in a self-excited thermoacoustic system.*
In: International Congress on Sound and Vibration, 23-27, July 2017, London.

## N

Nimmagadda, R and K, Venkatasubbaiah
(2017)
*Experimental and multiphase analysis of nanofluids on the conjugate performance of micro-channel at low Reynolds numbers.*
Heat and Mass.
pp. 1-17.
ISSN 0947-7411

Nimmagadda, Rajesh
(2017)
*Experimental and numerical study on the heat transfer performance of nanofluids in micro-channel and mini-enclosure.*
PhD thesis, Indian Institute of Technology Hyderabad.

## P

Pal, A and Bandyopadhyay, D and Biswas, G and Eswaran, Vinayak
(2012)
*Enhancement of heat transfer using delta-winglet type vortex generators with a common-flow-up arrangement.*
Numerical Heat Transfer, Part A Applications, 61 (12).
ISSN 1040-7782

Pal, Bijoy
(2017)
*Mechanical properties of the idealized inverse opal lattice.*
Masters thesis, Indian Institute of Technology Hyderabad.

Panchagnula, J S and Simhambhatla, S
(2016)
*Feature based Weld-Deposition for Additive Manufacturing of Complex Shapes.*
Journal of The Institution of Engineers (India): Series C.
pp. 1-8.
ISSN 2250-0545
(In Press)

Panchagnula, J S and Simhambhatla, S
(2018)
*Manufacture of complex thin-walled metallic objects using weld-deposition based additive manufacturing.*
Robotics and Computer-Integrated Manufacturing, 49.
pp. 194-203.
ISSN 0736-5845

Patil, P and Khaderi, Syed Nizamuddin and M, Ramji
(2017)
*Numerical estimation of strain intensity factors at the tip of a rigid line inclusion embedded in a finite matrix.*
Engineering Fracture Mechanics, 172.
pp. 215-230.
ISSN 0013-7944

Premlata, A R and Tripathi, M K and Karri, Badarinath and Sahu, Kirti Chandra
(2017)
*Dynamics of an air bubble rising in a non-Newtonian liquid in the axisymmetric regime.*
Journal of Non-Newtonian Fluid Mechanics, 239.
pp. 53-61.
ISSN 0377-0257

## Q

Quah, Edmund Wenjie and Karri, Badarinath and Ohl, Siew-Wan and Klaseboer, Evert and Khoo, Boo Cheong
(2017)
*Expansion and collapse of an initially off-centered bubble within a narrow gap and the effect of a free surface.*
International Journal of Multiphase Flow.
ISSN 0301-9322
(In Press)

## R

R, Harilal and Vyasarayani, C P and M, Ramji
(2015)
*A linear least squares approach for evaluation of crack tip stress field parameters using DIC.*
Optics and Lasers in Engineering, 75.
pp. 95-102.
ISSN 0143-8166

Rajendra Gaikwad, Shantanu and Pandey, Ashok Kumar
(2018)
*Nonlinear Analysis of Shape Memory Devices With Duffing and Quadratic Oscillators.*
Journal of Computational and Nonlinear Dynamics, 13 (1).
011003.
ISSN 1555-1415

Rangarajan, A M and Banerjee, Raja
(2013)
*Numerical Investigation of In-Cylinder Fuel Atomization and Mixing For a GDI Engine.*
In: Proceeding of the 22nd National and 11th International ISHMT-ASME Heat and Mass Transfer Conference, December, 2013, IIT, Kharagpur.

Ravichandran, S and Dixit, Harish Nagaraj and Govindarajan, R
(2017)
*Lift-induced vortex dipole collapse.*
Physical Review Fluids, 2 (034702).
ISSN 2469-990X

Raviprolu, Praveena and Jade, Nagaraja and B, Venkatesham
(2016)
*Sound Radiation Characteristics of a Rectangular Duct with Flexible Walls.*
Advances in Acoustics and Vibration, 2016.
pp. 1-15.
ISSN 1687-6261
(In Press)

Reddy, G D
(2017)
*The parameter choice rules for weighted Tikhonov regularization scheme.*
Computational and Applied Mathematics.
ISSN 0101-8205
(In Press)

Reddy, G S and Banerjee, Raja
(2017)
*Evaluation of Forcing Schemes in Pseudopotential Based Multiphase Lattice Boltzmann Model.*
In:
Fluid Mechanics and Fluid Power - Contemporary Research.
Lecture Notes in Mechanical Engineering
.
Springerlink, pp. 1003-1010.
ISBN 978-81-322-2743-4

Reddy, N H and Saxena, Prashant
(2017)
*Limit points in the free inflation of a magnetoelastic toroidal membrane.*
International Journal of Non-Linear Mechanics, 95.
pp. 248-263.
ISSN 0020-7462

Reddy, R and Banerjee, Raja
(2015)
*GPU accelerated VOF based multiphase flow solver and its application to sprays.*
Computers and Fluids, 117.
pp. 287-303.
ISSN 0045-7930

Reddy, Rajesh and Banerjee, Raja
(2017)
*Direct Simulations of Liquid Sheet Breakup in Planar Gas Blast Atomization.*
Atomization and Sprays, 27 (2).
pp. 95-116.
ISSN 1044-5110

## S

S, Chetan
(2017)
*Numerical modelling of fluid-structure interaction using fictitious domain method: application towards compressible fluid flow.*
Masters thesis, Indian Insitute of Technology Hyderabad.

Sadath, A and Vinu, V and Vyasarayani, C P
(2017)
*Vibrations of a Simply Supported Cross Flow Heat Exchanger Tube with Axial Load and Loose Supports.*
Journal of Computational and Nonlinear Dynamics, 12 (5).
051001.
ISSN 1555-1415

Samukham, S and Raju, S and Vyasarayani, C P
(2017)
*Parametric instabilities of variable angle tow composite laminate under axial compression.*
Composite Structures, 166.
pp. 229-238.
ISSN 0263-8223

Sebastian, J and Sivadasan, N and Banerjee, Raja
(2014)
*GPU accelerated three dimensional unstructured geometric multigrid solver.*
In: International Conference on High Performance Computing and Simulation, HPCS 2014, 21-25 July, 2014, Bologna; Italy.

Shah, K and Balsara, N and Banerjee, S and Chintapalli, M and Cocco, A P and Chiu, W K S and Lahiri, I and Martha, Surendra Kumar and Mistry, A and Mukherjee, P and Ramadesigan, V and Sharma, Chandra Shekhar and Subramanian, V R and Mitra, S and Jain, A
(2017)
*State-of-the-art and Future Research Needs for Multiscale Analysis of Li-ion Cells.*
Journal of Electrochemical Energy Conversion and Storage, 14 (2).
020801.
ISSN 2381-6872

Simhambhatla, S and Karunakaran, K P
(2015)
*Build strategies for rapid manufacturing of components of varying complexity.*
Rapid Prototyping Journal, 21 (3).
pp. 340-350.
ISSN 1355-2546

Singh, S G and Veerla, S and Sharma, Vandana and Pandey, Ashok Kumar and Pal, Prem
(2016)
*Precise identification of < 1 0 0 > directions on Si{001} wafer using a novel self-aligning pre-etched technique.*
Journal of Micromechanics and Microengineering, 26 (2).
ISSN 0960-1317

Singh, S S and Pal, Prem and Pandey, Ashok Kumar and Xing, Y and Sato, K
(2016)
*Determination of precise crystallographic directions for mask alignment in wet bulk micromachining for MEMS.*
Micro and Nano Systems Letters, 4 (5).
pp. 1-29.
ISSN 2213-9621

Singh, S S and Veerla, S and Sharma, Vandana and Pandey, Ashok Kumar and Pal, Prem
(2016)
*Precise identification of <1 0 0> directions on Si{0 0 1} wafer using a novel self-aligning pre-etched technique.*
Journal of Micromechanics and Microengineering, 26 (2).
ISSN 0960-1317

Somashekara, M A and Simhambhatla, S
(2017)
*Studies on Dissimilar Twin-Wire Weld-Deposition for Additive Manufacturing Applications.*
Transactions of the Indian Institute of Metals, 70 (8).
pp. 2123-2135.
ISSN 0972-2815

Surya, S and Vyasarayani, C P and Kalmár-Nagy, T
(2017)
*Homotopy continuation for characteristic roots of delay differential equations using the Lambert W function.*
Journal of Vibration and Control.
p. 107754631771762.
ISSN 1077-5463
(In Press)

## T

T, Praveen and Eswaran, Vinayak
(2017)
*Transition to asymmetric flow in a symmetric sudden expansion: Hydrodynamics and MHD cases.*
Computers and Fluids, 148.
pp. 103-120.
ISSN 0045-7930

Tripathy, Swaraj Kumar
(2017)
*Stress Concentration/Intensity Factor Determination Using Thermo-Elastic Stress Analysis (TSA).*
Masters thesis, Indian Institute of Technology Hyderabad.

## U

Umashankar, Hariharan and Kalpathy, Sreeram and Dixit, Harish Nagaraj
(2017)
*Stability of thin liquid films containing surface active particles.*
In: 70th Annual Meeting of the APS Division of Fluid Dynamics, November 19–21, 2017, Denver, Colorado.

## V

V, Janardhan and R, Prasanth Kumar
(2017)
*Generating Feasible Solutions for Dynamically Crossing a Wide Ditch by a Biped Robot.*
Journal of Intelligent & Robotic Systems, 88 (1).
pp. 37-56.
ISSN 0921-0296

V, Nidheesh
(2017)
*Effect of Joint Distortions on Breakout Noise from a
Flexible Rectangular Duct.*
Masters thesis, Indian Institute of Technology Hyderabad.

Vaisakhan, V S
(2014)
*Numerical modeling of Non-ideal Multicomponent mixture Sprays.*
Masters thesis, Indian Institute of Technology Hyderabad.

Vemula, Sai Theja
(2017)
*A simple model to estimate the velocity of sand during explosion in sand.*
Masters thesis, Indian Institute of Technology Hyderabad.

Vishwakarma, S D and Pandey, Ashok Kumar and Parpia, J M and Southworth, D R and Craighead, H G and Pratap, R
(2014)
*Evaluation of mode dependent fluid damping in a high frequency drumhead microresonator.*
Journal of Microelectromechanical Systems, 23 (2).
pp. 334-346.
ISSN 1057-7157

Vivek, Atul S
(2017)
*On the Stability of Thin Films.*
Masters thesis, Indian Institute of Technology Hyderabad.

Vyasarayani, C P
(2012)
*Galerkin Approximations for Neutral Delay Differential Equations.*
Journal of Computational and Nonlinear Dynamics, 8 (2).
021014-1.
ISSN 1555-1415

Vyasarayani, C P and Abdel-Rahman, E M and McPhee, J
(2012)
*Modeling of Contact and Stiction in Electrostatic Microcantilever Actuators.*
Journal of Nanotechnology in Engineering and Medicine, 3 (1).
pp. 1-8.
ISSN 1949-2944

Vyasarayani, C P and Sandhu, S S and McPhee, J
(2012)
*Nonsmooth Modeling of Vibro-Impacting Euler-Bernoulli Beam.*
Advances in Acoustics and Vibration.
pp. 1-9.
ISSN 1687-6261

Vyasarayani, C P and Gupta, A and McPhee, J
(2013)
*Galerkin approximations for retarded delay differential equations with state-dependent delays.*
Journal of Dynamic Systems, Measurement, and Control, 135 (6).
pp. 1-6.
ISSN 0022-0434

Vyasarayani, C P and Uchida, T and McPhee, J
(2012)
*Single-shooting homotopy method for parameter identification in dynamical systems.*
Physical Review E, 85 (3).
036201-1.
ISSN 1539-3755

## Y

Yadav, R and Kushari, A and Eswaran, Vinayak and Verma, A K
(2012)
*A Detailed Validation Study of Multi-Environment Eulerian PDF Transport Method for Modeling Turbulent Non-Premixed Combustion.*
In: ASME 2012 Gas Turbine India Conference, December 1, 2012, Mumbai, Maharashtra, India,.

Yadav, R and Kushari, A and Eswaran, Vinayak and Verma, A K
(2014)
*A Detailed Validation Study of Multi-Environment Eulerian Probability Density Function Transport Method for Modeling Turbulent Nonpremixed Combustion.*
Journal of Engineering for Gas Turbines and Power, 136 (8).
pp. 1-11.
ISSN 0742-4795

Yadav, R and Kushari, A and Eswaran, Vinayak and Verma, A K
(2013)
*A numerical investigation of the Eulerian PDF transport approach for modeling of turbulent non-premixed pilot stabilized flames.*
Combustion and Flame, 160 (3).
pp. 618-634.
ISSN 0010-2180

Yadav, R and Kushari, A and Verma, A K and Eswaran, Vinayak
(2013)
*Weighted sum of gray gas modeling for nongray radiation in combusting environment using the hybrid solution methodology.*
Numerical Heat Transfer, Part B Fundamentals, 64 (2).
pp. 174-197.
ISSN 1040-7790

Yang, L and Gong, Z and Lin, Y and Chinthapenta, Viswanath and Li, Q and Webster, T J and Sheldon, B W
(2017)
*Disordered Topography Mediates Filopodial Extension and Morphology of Cells on Stiff Materials.*
Advanced Functional Materials.
p. 1702689.
ISSN 1616-301X
(In Press)

## Z

Zaid, A and Uchida, T K and Subudhi, A and Vyasarayani, C P
(2015)
*Stability of human balance with reflex delays using Galerkin approximations.*
Journal of Computational and Nonlinear Dynamics, 11 (4).
041009-1.
ISSN 1555-1415