Items where Division is "Department of Mechanical & Aerospace Engineering" and Year is 2018

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | E | G | H | I | J | K | M | N | P | R | S | T | V | W
Number of items: 96.

A

Agrawal, M and Katiyar, Rajat Kumar and Sahu, Kirti Chandra and Karri, Badarinath (2018) Experimental investigation of a freely falling liquid drop in air. In: 71st Annual Meeting of the APS Division of Fluid Dynamics, 18–20 November 2018, Atlanta, Georgia.

Akarapu, Ashok and P, Manoj Kumar and Singh, Sajal Sagar and P, Raju and Pal, Prem and Pandey, Ashok Kumar (2018) Achieving wideband micromechanical system using coupled non-uniform beams array. Sensors and Actuators A: Physical, 273. pp. 12-18. ISSN 0924-4247

Akiwate, Deepak C and Date, Mahendra D and B, Venkatesham and S, Suryakumar (2018) Acoustic properties of additive manufactured narrow tube periodic structures. Applied Acoustics, 136. pp. 123-131. ISSN 0003-682X

Aravinth, Dinesh and Shinde, Paritosh and Misra, A and M S, Mahesh (2018) Dynamic Aeroelasticity of a Trapezoidal Wing Using Enhanced Piston Theory. In: 2018 AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 8–12 January 2018, Kissimmee, Florida.

Assam, Ashwani and Kalkote, Nikhil Narayan and Dongari, Nishanth and Eswaran, Vinayak (2018) Comprehensive Evaluation of a New Type of Smoluchowski Temperature Jump Condition. AIAA Journal. pp. 1-5. ISSN 0001-1452

Assam, Ashwani and Kalkote, Nikhil Narayan and Sharma, Vatsalya and Eswaran, Vinayak (2018) An Automatic Wall Treatment for Spalart-Allmaras Turbulence Model. Journal of Fluids Engineering. ISSN 0098-2202 (Submitted)

B

B, Venkatesham and Jade, Nagaraja (2018) Sound Source Reconstruction on Flexible Plate backed by a Cavity using Equivalent Source Method. NOISE Theory and Practice, 4 (1). pp. 5-17. ISSN 2412-8627

Banerjee, Nilanjan and Sharma, Abhay (2018) Improving machining performance of Ti-6Al-4V through multi-point minimum quantity lubrication method. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. ISSN 0954-4054

Bhagat, A and Gijare, H and Dongari, Nishanth (2018) Computational Analysis of Side Jet Interaction With a Super-sonic Cross-flow. In: Proceedings of the 6th International and 43rd National Conference on Fluid Mechanics and Fluid Power, 15-17, December 2016, MNNITA, Allahabad, U.P., India.

Biswal, Abinash and Balusamy, Saravanan and Kolhe, Pankaj et. al (2018) Experimental Investigation of Lemon Peel Oil-Gasoline Blends as a Fuel in Spark Ignition Engine. In: Proceedings of the 7th International and 45th National Conference on Fluid Mechanics and Fluid Power (FMFP), 10-12 December 2018, IIT Bombay, Mumbai, India.

Bragadeshwaran, Ashok and Kasianantham, Nanthagopal and B, Saravanan and K R, Tarun and Dharmaraj, Arumuga Perumal and Kaisan, Muhammad Usman (2018) Experimental study of methyl tert-butyl ether as an oxygenated additive in diesel and Calophyllum inophyllum methyl ester blended fuel in CI engine. Environmental Science and Pollution Research, 25 (33). pp. 33573-33590. ISSN 0944-1344

Bragadeshwaran, Ashok and Kasianantham, Nanthagopal and B, Saravanan and Muniappan, SenthilKumar and Reddy, Dandu Madhu Sudan and Subhash, Randive Vishal and Pravin, Nashte Adarsh and Subbarao, Rayapati (2018) Mitigation of NOx and smoke emissions in a diesel engine using novel emulsified lemon peel oil biofuel. Environmental Science and Pollution Research. pp. 1-17. ISSN 0944-1344

Bragadeshwaran, Ashok and Kasianantham, Nanthagopal and B, Saravanan and P, Somasundaram and C, Jegadheesan and Chaturvedi, Bhaskar and Sharma, Shivam and Patni, Gaurang (2018) A novel study on the effect lemon peel oil as a fuel in CRDI engine at various injection strategies. Energy Conversion and Management, 172. pp. 517-528. ISSN 0196-8904

C

Chaganti, Narendra S and Brooker, Brian T and Olcmen, Semih M and Kolhe, Pankaj (2018) Study of shock wave boundary layer interaction using modal decomposition. In: 2018 AIAA Aerospace Sciences Meeting, 8–12 January 2018, Kissimmee, Florida.

Chakraborty, Sayan and Kandala, Shanti Swaroop and Vyasarayani, C P (2018) Reduced Ordered Modelling of Time Delay Systems Using Galerkin Approximations and Eigenvalue Decomposition. IFAC-PapersOnLine, 51 (1). pp. 566-571. ISSN 2405-8963

Chandra, Athkuri Sai Saketha and Sharma, Vatsalya and Assam, Ashwani and Eswaran, Vinayak (2018) PERFORMANCE OF CONVECTIVE SCHEMES IN DENSITY BASED SOLVER. In: Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), December 27-30, 2017, BITS-Pilani, Hyderabad.

Chandra, Shiv Krishan and M, Ramji (2018) An experimental study on the stability behaviour of curved CFRP panel under axial compression load. Masters thesis, Indian Institute of Technology Hyderabad.

D

D, Veerababu and B, Venkatesham (2018) Acoustic analysis of extended inlet/extended outlet concentric tube resonator using Green’s function. In: 47th International Congress and Exposition on Noise Control Engineering: Impact of Noise Control Engineering.

De, A K and Eswaran, Vinayak and Mishra, P K (2018) Dynamics of plumes in turbulent Rayleigh–Bénard convection. European Journal of Mechanics, B/Fluids, 72. pp. 164-178. ISSN 0997-7546

Dirbude, Sumer and Kushari, Abhijit and Eswaran, Vinayak (2018) Numerical Modeling and Study of Vaporization of Single Droplet and Mono-dispersed Spray Under Mixed Convection Conditions. In: Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering (I-DAD 2018). Lecture Notes in Mechanical Engineering . Springer, Singapore, pp. 73-82. ISBN 9789811326967

Dsouza, Cyril and K, Venkatasubbaiah (2018) Effect of angle of attack and ow separation control on scramjet inlet using Hybrid RANS/LES. Masters thesis, Indian Institute of Technology Hyderabad.

E

Eknath, Jagtap Akshay and R, Prasanth Kumar (2018) Generating Trajectories for Biped Robot Vertical Jumping. Masters thesis, Indian Institute of Technology, Hyderabad.

G

Gaddam, Saritha and Banerjee, Raja (2018) Bubble dynamics of a pressure-driven cavitating flow in a micro-scale channel using a high density pseudo-potential Lattice Boltzmann method. Heat Transfer Engineering. pp. 1-15. ISSN 0145-7632 (In Press)

Gajbhiye, Narendra Laxman and Eswaran, Vinayak (2018) MHD buoyant flow in a cubical enclosure at low to high Hartmann number. International Journal of Thermal Sciences, 134. pp. 168-178. ISSN 1290-0729

Gajbhiye, Narendra Laxman and Throvagunta, Praveen and Eswaran, Vinayak (2018) Validation and verification of a robust 3-D MHD code. Fusion Engineering and Design, 128. pp. 7-22. ISSN 0920-3796

Gangele, Aparna and Garala, S K and Pandey, Ashok Kumar (2018) Influence of Van der Waals Forces on Elastic and Buckling Characteristics of Vertically Aligned Carbon Nanotubes. International Journal of Mechanical Sciences. ISSN 0020-7403 (In Press)

Gangele, Aparna and Pandey, Ashok Kumar (2018) Elastic and fracture characteristics of graphene-silicon nanosheet composites using nonlinear finite element method. International Journal of Mechanical Sciences, 142. pp. 491-501. ISSN 0020-7403

Ghatode, Kishor and Chinthapenta, Viswanath (2018) Computational Modeling of Growth with and without discontinuities in the biological structure. Masters thesis, Indian Institute of Technology Hyderabad.

Gijare, H and Bhagat, A and Dongari, Nishanth (2018) EFFECT OF CHEMICAL NON-EQUILIBRIUM ON FLOW PARAMETERS IN THE INTERMEDIATE HYPERSONIC REGIME. In: Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), 27-30, December 2017, BITS-Pilani, Hyderabad.

Gijare, H and Bhagat, A and Dongari, Nishanth (2018) Numerical Analysis of Rarefied Hypersonic and Chemically Reacting Flow-field. In: Proceedings of the 6th International and 43rd National Conference on Fluid Mechanics and Fluid Power, 15-17, December 2016, MNNITA, Allahabad, U.P., India.

Golla, Siva Teja and K, Mayur and B, Venkatesham and Banerjee, Raja (2018) Experimental study of sloshing noise in a partially filled rectangular tank under periodic excitation. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering. ISSN 0954-4070

H

Hedau, Mridul and S, Suryakumar (2018) Temperature Distribution during Single Pass Multi-Layer Welding in Additive Manufacturing. Masters thesis, Indian Institute of Technology Hyderabad.

Hoskoti, Lokanna and Misra, Ajay and M S, Mahesh (2018) Frequency lock-in during vortex induced vibration of a rotating blade. Journal of Fluids and Structures, 80. pp. 145-164. ISSN 0889-9746

I

IIT, Hyderabad (2018) IIT-incubated startup to roll out cheaper lithium batteries. The Hindu, Hyderabad.

Imam, Murshid and Sun, Yufeng and Fujii, Hidetoshi and MA, Ninshu and Tsutsumi, Seiichiro and Ahmed, Shuja and Chinthapenta, Viswanath and Murakawa, Hidekazu (2018) Deformation characteristics and microstructural evolution in friction stir welding of thick 5083 aluminum alloy. International Journal of Advanced Manufacturing Technology. ISSN 0268-3768

J

Jade, Nagaraja and B, Venkatesham (2018) Free vibrational analysis of rectangular ducts with different joint conditions. Journal of Theoretical and Applied Mechanics, 56 (4). pp. 1069-1081. ISSN 1429-2955

Jade, Nagaraja and B, Venkatesham (2018) Vibro-Acoustic behaviour of Flexible Rectangular Ducts. PhD thesis, Indian institute of technology Hyderabad.

Jagtap, Rohit shashikant and K, Venkatasubbaiah (2018) Large eddy simulation of tunnel fire with blockage and roof vents. Masters thesis, Indian Institute of Technology Hyderabad.

Jain, Rajeev and Chinthapenta, Viswanath (2018) Interface delamination in stepped lap repaired CFRP panel under tensile loading. Masters thesis, Indian Institute of Technology Hyderabad.

Janardhanan, V and Prasanth Kumar, R (2018) Generating real-time trajectories for a planar biped robot crossing a wide ditch with landing uncertainties. Robotica. pp. 1-32. ISSN 0263-5747 (In Press)

K

K, Nirmal and M S, Mahesh (2018) Acoustics performance of mufflers with baffles. Masters thesis, Indian Institute of Technology Hyderabad.

K, Varaprasad and Raju, Gangadharan (2018) Experimental and numerical studies on the damage behaviour of open hole CFRP composite specimen subjected to compression. Masters thesis, Indian Institute of Technology Hyderabad.

Kalkote, Nikhil Narayan and Assam, Ashwani and Eswaran, Vinayak (2018) Acceleration of Later Convergence in a Density-Based Solver Using Adaptive Time Stepping. AIAA Journal. pp. 1-13. ISSN 0001-1452

Kalkote, Nikhil Narayan and Assam, Ashwani and Eswaran, Vinayak (2018) Towards developing an adaptive time stepping for compressible unsteady flows. International Journal of Numerical Methods for Heat & Fluid Flow. ISSN 0961-5539 (In Press)

Kalkote, Nikhil Narayan and Eswaran, Vinayak (2018) NUMERICAL COMPUTATION OF NATURAL CONVECTION ON UNSTRUCTURED HYBRID MESH WITHOUT PRECONDITIONING. In: Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), December 27-30, 2017, BITS-Pilani, Hyderabad.

Kamani, Ravikumar V and B, Venkatesham (2018) Vibro-acoustics analysis of uid-filled shells using the transfer matrix method. Masters thesis, Indian Institute of Technology Hyderabad.

Kandala, Shanti Swaroop and Vyasarayani, Chandrika Prakash (2018) Pole placement for delay differential equations with time-periodic delays using Galerkin approximations. IFAC-PapersOnLine, 51 (1). pp. 560-565. ISSN 2405-8963

Kannan, Y S and Karri, Badarinath and Sahu, Kirti Chandra (2018) Letter: Entrapment and interaction of an air bubble with an oscillating cavitation bubble. Physics of Fluids, 30 (4). 041701. ISSN 1070-6631

Khandagale, Sudarshan and R, Prasanth Kumar (2018) Development of Plotter Using Parallel Manipulator. Masters thesis, Indian Institute of Technology Hyderabad.

Khare, Vivek Kumar and S, Suryakumar (2018) Thermal Management Approaches for Distortion Control in Metal Additive Manufacturing. Masters thesis, Indian Institute of Technology Hyderabad.

Kodhanda, Adarsh and Ali, Nisar and M S, Mahesh and Talole, S E (2018) Robust control of nonlinear resonance in a clamped rectangular plate. Journal of Vibration and Control, 24 (18). pp. 4176-4194. ISSN 1077-5463

Kolanu, Naresh Reddy and Raju, Gangadharan and M, Ramji (2018) Damage assessment studies in CFRP composite laminate with cut-out subjected to in-plane shear loading. Composites Part B: Engineering. ISSN 1359-8368 (In Press)

Kolanu, Naresh Reddy and Raju, Gangadharan and M, Ramji (2018) Experimental and numerical studies on the buckling and post-buckling behavior of single blade-stiffened CFRP panels. Composite Structures. ISSN 0263-8223 (In Press)

M

M, Sreejith and Khaderi, Syed Nizamuddin (2018) Numerical modelling of fluid structure interaction using fictitious domain method. Masters thesis, Indian Institute of Technology Hyderabad.

Madhuranthakam, Yoganandh and B, Venkatesham (2018) Prediction of Breakout Noise from a Rectangular Duct using SEA and Deterministic methods. Masters thesis, Indian Institute of Technology Hyderabad.

Mahanta, T K and B, Venkatesham (2018) Sound Quality Evaluation of Automotive horn. PhD thesis, Indian institute of technology Hyderabad.

Mastanaiah, P and Sharma, Abhay and Reddy, G. Madhusudhan (2018) Process parameters-weld bead geometry interactions and their influence on mechanical properties: A case of dissimilar aluminium alloy electron beam welds. Defence Technology, 14 (2). pp. 137-150. ISSN 2214-9147

Mathews, Jobin T and Khaderi, Syed Nizamuddin (2018) Implementation of the boundary element method. Masters thesis, Indian Institute of Technology Hyderabad.

Matta, Seshadri and M, Ramji (2018) Prediction of mechanical behaviour of adhesively bonded CFRP scarf jointed specimen under tensile loading using localised DIC and CZM. International Journal of Adhesion and Adhesives. ISSN 0143-7496 (In Press)

Mohanty, Uttam Kumar and Sharma, Abhay and Nakatani, Mitsuyoshi and Kitagawa, Akikazu and Tanaka, Manabu and Suga, Tetsuo (2018) A Semi-Analytical Nonlinear Regression Approach for Weld Profile Prediction: A Case of Alternating Current Square Waveform Submerged Arc Welding of Heat Resistant Steel. Journal of Manufacturing Science and Engineering, 140 (11). ISSN 1087-1357

Moinuddin, S Q and Sharma, Abhay (2018) ASSESSMENT OF ARC STABILITY AND ITS IMPACT IN ANTI-PHASE SYNCHRONIZED TWIN-WIRE GAS METAL ARC WELDING. PhD thesis, Indian institute of technology Hyderabad.

N

Nanthagopal, K and Ashok, B and B, Saravanan and Korah, Shane Mathew and Chandra, Snehith (2018) Effect of next generation higher alcohols and Calophyllum inophyllum methyl ester blends in diesel engine. Journal of Cleaner Production, 180. pp. 50-63. ISSN 0959-6526

Nanthagopal, K and Ashok, B and B, Saravanan and Patel, Deepam and Sudarshan, B and Aaditya Ramasamy, R (2018) An assessment on the effects of 1-pentanol and 1-butanol as additives with Calophyllum Inophyllum biodiesel. Energy Conversion and Management, 158. pp. 70-80. ISSN 01968904

Nighot, Rohit Prakash and Pandey, Ashok Kumar (2018) Drag force computation in single and arrays of micromechanical beams with uniform and arrow shaped width. Masters thesis, Indian Institute of Technology Hyderabad.

Nived, M R and Eswaran, Vinayak (2018) Parallelization of a Hybrid Unstructured Grid Density-based Flow Solver. Masters thesis, Indian institute of technology Hyderabad.

Nogar, Stephen M and Serrani, Andrea and Gogulapati, Abhijit and McNamara, Jack J and Oppenheimer, Michael W and Doman, David B (2018) Design and Evaluation of a Model-Based Controller for Flapping-Wing Micro Air Vehicles. Journal of Guidance, Control, and Dynamics, 41 (12). pp. 2513-2528. ISSN 0731-5090

P

P, Mastanaiah and Sharma, Abhay (2018) Electron Beam Welding and Friction Stir Welding of Dissimilar Aluminium Alloys (AA2219 and AA5083). PhD thesis, Indian Institute of Technology Hyderabad.

P, Mastanaiah and Sharma, Abhay and Reddy, G. Madhusudhan (2018) Role of hybrid tool pin profile on enhancing welding speed and mechanical properties of AA2219-T6 friction stir welds. Journal of Materials Processing Technology, 257. pp. 257-269. ISSN 0924-0136

Panchagnula, Jayaprakash Sharma and Simhambhatla, S (2018) Manufacture of complex thin-walled metallic objects using weld-deposition based additive manufacturing. Robotics and Computer-Integrated Manufacturing, 49. pp. 194-203. ISSN 0736-5845

Parchuru, Venkatadri and Chinthapenta, Viswanath (2018) Strain gradient effects on FCC single crystal. Masters thesis, Indian Institute of Technology Hyderabad.

Patil, Sitanshu Vasant and R, Prasanth Kumar (2018) Biped Robot: Design and Manufacturing. Masters thesis, Indian Institute of Technology Hyderabad.

Pole, Ramu and Karri, Badarinath (2018) Experimental studies on motion of falling flat thin disk inside liquid. Masters thesis, Indian Institute of Technology Hyderabad.

R

Rajendra Gaikwad, Shantanu and Pandey, Ashok Kumar (2018) Nonlinear Analysis of Shape Memory Devices With Duffing and Quadratic Oscillators. Journal of Computational and Nonlinear Dynamics, 13 (1). 011003. ISSN 1555-1415

Raju, Gangadharan and Wu, Zhangming and White, Simon and Weaver, Paul M (2018) Optimal Postbuckling Design of Variable Angle Tow Composite Plates. AIAA Journal. pp. 1-17. ISSN 0001-1452

Reddy, N Venkata and Lingam, R (2018) Double Sided Incremental Forming: Capabilities and Challenges. Journal of Physics: Conference Series, 1063. pp. 1-6. ISSN 1742-6588

Reddy, V R K and Subbiah, M (2018) On shear instability and propagation of surface gravity waves in sea straits. The European Physical Journal Plus, 133 (475). pp. 1-17. ISSN 2190-5444

Rodrigues, Troglio John Allister and R, Prasanth Kumar (2018) Design Assembly and Gait Generation of a Quadruped Robot. Masters thesis, Indian Institute of Technology Hyderabad.

S

S, Gurucharan and M, Ramji (2018) Progressive damage analysis of CFRP Laminate with circular cutouts under flexural loading. Masters thesis, Indian Institute of Technology Hyderabad.

S, Pavan Reddy and Khaderi, Syed Nizamuddin (2018) Impact analysis on Sandwich structures with steel panels and aluminum foam core. Masters thesis, Indian institute of technology Hyderabad.

S S, Jayakrishnan and Dixit, Harish Nagaraj (2018) On a general method to determine van der Waals interactions in inhomogeneous thin film. Masters thesis, Indian Institute of Technology Hyderabad.

Sahoo, Debesh Kumar and Pandey, Ashok Kumar (2018) Performance of non-uniform cantilever based piezoelectric energy harvester. ISSS Journal of Micro and Smart Systems, 7 (1). pp. 1-13. ISSN 2509-7989

Sahu, Nagesh Kumar and Pandey, Ashok Kumar (2018) Dynamic analysis of structure with bolted joint and identifying joint parameters. Masters thesis, Indian Institute of Technology Hyderabad.

Saleem, Abdullah and Farooq, Shamsuzzaman and Karimi, Iftekhar A and Banerjee, Raja (2018) CFD simulation of a full scale LNG storage tank. Computer Aided Chemical Engineering, 44 (1). pp. 883-888. ISSN 1570-7946

Saleem, Abdullah and Farooq, Shamsuzzaman and Karimi, Iftekhar A and Banerjee, Raja (2018) A CFD simulation study of boiling mechanism and BOG generation in a full-scale LNG storage tank. Computers & Chemical Engineering, 115. pp. 112-120. ISSN 0098-1354

Sapkale, Swapnil L and M S, Mahesh and Gupta, Shakti S and Kanade, Shantanu V (2018) Vibroacoustic study of a point-constrained plate mounted in a duct. Journal of Sound and Vibration, 420. pp. 204-226. ISSN 0022-460X

Sharma, Abhay (2018) A fundamental study on qualitatively viable sustainable welding process maps. Journal of Manufacturing Systems, 46. pp. 221-230. ISSN 0278-6125

Sharma, Vatsalya and Assam, Ashwani and Eswaran, Vinayak (2018) NUMERICAL SIMULATION OF TURBULENT HIGH SPEED PLANE JETS- A VALIDATION WITH EXPERIMENTAL RESULTS. In: Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), December 27-30, 2017, BITS-Pilani, Hyderabad.

Soni, Sourabh and Chinthapenta, Viswanath (2018) Theoretical and Experimental Characterization of Surface Cracks in FGM and Anisotropic Thin Films. Masters thesis, Indian Institute of Technology Hyderabad.

Sripada, Aditya and Vistapalli, Janardhan and Kumar, R P (2018) Biped Robot Vertical Jumping with Control Constraints. In: IEEE International Conference on Robotics and Biomimetics, ROBIO, 12-15 December 2018, Kuala Lumpur Convention Centre (KLCC) Kuala Lumpur, Malaysia.

T

Thomas, Mithun K and Khaderi, Syed Nizamuddin (2018) Experimental setup of split Hopkinson pressure bar. Masters thesis, Indian Institute of Technology Hyderabad.

Thorat, Satish Prakash and M, Ramji (2018) Study of interaction effect between a line inclusion and a hole using Digital Photoelasticity. Masters thesis, Indian Institute of Technology Hyderabad.

Tripathi, Manish and Misra, A and M S, Mahesh (2018) Effect of Rectangular and Airfoil Planar Member Cross-section on Cascade Fin Aerodynamics. In: 2018 AIAA Atmospheric Flight Mechanics Conference, 8–12 January 2018, Kissimmee, Florida.

V

Vistapalli, Janardhan and R, Prasanth Kumar (2018) Generating Trajectories for Wide Ditch Crossing of Biped Robots. PhD thesis, Indian Institute of Technology, Hyderabad.

W

Wakale, A B and Banerjee, S and Banerjee, Raja (2018) Experimental and chemical kinetic study of the impact of n-butanol blending on the gross engine performance of a CRDI engine. Energy Conversion and Management, 178. pp. 400-414. ISSN 0196-8904

Wakale, A B and Kaira, Shankar Singh and Banerjee, Raja (2018) NUMERICAL SIMULATION OF SPLIT INJECTION USING 105 SPECIES BASED N-DODECANE CHEMICAL KINETIC FLAMELET MODEL FOR DIRECT INJECTION CI ENGINE. In: Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference, 27-30 December 2017, BITS Pilani, Hyderabad, India.

Wu, Zhangming and Raju, Gangadharan and Weaver, Paul M (2018) Optimization of postbuckling behaviour of variable thickness composite panels with variable angle tows: Towards “Buckle-Free” design concept. International Journal of Solids and Structures, 132-13. pp. 66-79. ISSN 00207683

This list was generated on Mon Jun 24 22:45:21 2019 IST.