Items where Division is "Department of Mechanical & Aerospace Engineering" and Year is 2017

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | E | G | H | I | J | K | M | N | P | Q | R | S | T | U | V | Y
Number of items: 54.

A

A R, Premlata and Sharaf, Dilin and Tripathi, Manoj and Karri, Badarinath and Sahu, Kirti Chandra (2017) Shapes and paths of an air bubble rising in quiescent liquids. In: 70th Annual Meeting of the APS Division of Fluid Dynamics, November 19–21, 2017, Denver, Colorado.

Agawane, G and Jadon, Varun and B, Venkatesham and Banerjee, Raja (2017) An Experimental Study of Sloshing Noise in a Partially Filled Rectangular Tank. SAE International Journal of Passenger Cars - Mechanical Systems, 10 (2). ISSN 1946-4002 (In Press)

Angwani, Vikas (2017) Numerical investigation of deformation and evaporation of a volatile ethanol droplet under high-temperature conditions. Masters thesis, Indian Institute of Technology Hyderabad.

B

Bansal, A and Lingam, R and Yadav, S K and Reddy, N V (2017) Prediction of forming forces in single point incremental forming. Journal of Manufacturing Processes, 28 (3-SI). pp. 486-193. ISSN 1526-6125

C

Chandran, Navaneeth T (2017) Detecting and locating delamination in stiffened panels using 3D digital image correlation technique. Masters thesis, Indian Institute of Technology Hyderabad.

Chelimilla, Sneha (2017) Phononic Bandgaps in Two-Dimensional Periodic Structures. Masters thesis, Indian Institute of Technology Hyderabad.

Choudhury, Sanatan and Sharma, Abhay and Mohanty, Uttam Kumar and Kasai, Ryu and Komura, Masaharu and Tanaka, Manabu and Suga, Tetsuo (2017) Mathematical model of complex weld penetration profile: A case of square AC waveform arc welding. Journal of Manufacturing Processes, 30. pp. 483-491. ISSN 1526-6125

D

D, Veerababu and B, Venkatesham (2017) Three-dimensional acoustic analysis of concentric tube resonator using green's function. In: 24th International Congress on Sound and Vibration (ICSV), 23-27 July, 2017, London; United Kingdom.

De, A K and Eswaran, Vinayak (2017) Scalings of heat transport and energy spectra of turbulent Rayleigh-Benard convection in a large-aspect-ratio box. International Journal of Heat and Fluid Flow, 67. pp. 111-124. ISSN 0142-727X

Duryodhan, V S and Singh, Shiv Govind and Agarwal, Anil (2017) Effect of Cross Aspect Ratio on Flow in Diverging and Converging Microchannels. Journal of Fluids Engineering, 139 (6). 061203. ISSN 0098-2202

E

Edara, Satyavardhana Rao (2017) Numerical and Experimental Evaluation of Lamb Wave Dispersion curves in Composite Laminates. Masters thesis, Indian Institute of Technology Hyderabad.

G

G, Pradeep and T, Thanigaivel Raja and D, Veerababu and B, Venkatesham (2017) Numerical Prediction of Perforated tube acoustic impedance. In: 24th International Conference on Sound and Vibration, London, 23-27 July, 2017.

H

Hoskoti, L and Misra, A and Sucheendran, M (2017) Interaction of nonlinear normal modes of a cantilever beam. In: 24th International Congress on Sound and Vibration (ICSV), 23-27 July, 2017, London; United Kingdom.

I

Iyer, Balaji V S and Dixit, Harish Nagaraj (2017) Complex Fluids Meeting (CompFlu@Hyd 2016) HYDERABAD, INDIA DECEMBER 12-14, 2016. Applied Rheology, 27 (4). ISSN 1430-6395

J

Jadhav, Aakash (2017) Sound Radiation Due To Impacted Plates. Masters thesis, Indian Instiute of Technology Hyderabad.

Jadhav, Pramod D (2017) Uncertainty estimations in external flow using Computational fluid Dynamics (CFD). Masters thesis, Inidian Institute of Technology Hyderabad.

Jaiswal, S and Reddy, R and Banerjee, Raja and Sato, S and Komagata, D and Ando, M and Okada, J (2017) An efficient GPU parallelization for arbitrary collocated polyhedral finite volume grids and its application to incompressible fluid flows. In: International Conference on High Performance Computing Workshops, HiPCW, 19-22 December 2016, Hyderabad; India.

Janardhan, V and R, Prasanth Kumar (2017) Online trajectory generation for wide ditch crossing of biped robots using control constraints. Robotics and Autonomous Systems. ISSN 0921-8890 (In Press)

K

K, Sobhith (2017) Study of Delamination, Matrix/fiber damage in CFRP under bending using Acoustic Emission and Cohensive Zone technique. Masters thesis, Indian Institute of Technology Hyderabad.

Kaira, Shankar Singh (2017) CFD Modeling of Non-premixed Combustion Inside a Diesel Engine. Masters thesis, Indian Insitute of Technology Hyderabad.

Kandala, Shanti Swaroop and Maduri, Abhivamshi and Vyasarayani, C P (2017) Galerkin Approximations for Thermoacoustic Instability in a Rijke's Tube. Procedia IUTAM, 22. pp. 168-175. ISSN 2210-9838

Kandan, K and Khaderi, Syed Nizamuddin and Wadley, H N G and Deshpande, V S (2017) Surface instabilities in shock loaded granular media. Journal of the Mechanics and Physics of Solids, 109. pp. 217-240. ISSN 0022-5096

Kannan, Y S and Balusamy, Saravanan and Karri, Badarinath and Sahu, Kirti Chandra (2017) Effect of viscosity on the dynamics of a spark-generated non-equilibrium bubble in free-field and near a free-surface. In: 70th Annual Meeting of the APS Division of Fluid Dynamics, November 19–21, 2017, Denver, Colorado.

Karri, Badarinath and A R, Premlata and Tripathi, Manoj and Sahu, Kirti Chandra (2017) Numerical and experimental investigations of an air bubble rising in a Carreau-Yasuda shear-thinning liquid. In: 70th Annual Meeting of the APS Division of Fluid Dynamics, November 19–21, 2017, Denver, Colorado.

Keskar, Harshad and B, Venkatesham (2017) Transmission loss characteristics of an annular cavity with arbitrary port locations using Green's function method. The Journal of the Acoustical Society of America, 142 (3). pp. 1350-1361. ISSN 0001-4966

M

M Adinarayanappa, S and Simhambhatla, S and Campbell, R. Ian and Gibson, Ian (2017) Twin-wire welding based additive manufacturing (TWAM): manufacture of functionally gradient objects. Rapid Prototyping Journal, 23 (5). pp. 858-868. ISSN 1355-2546

Mahato, Uttam Kumar (2017) Optimal energy consumption of a biped robotfor crossing a wide ditch. Masters thesis, Indian Insitute of Technology Hyderabad.

Md, Yousuf Ahmed and Appam, N and Md, Nayeemuddin and Md, Ahmed and Md, Abdullah (2017) Design and Simulation of Solar Car. International Journal of Scientific Research in Science, Engineering and Technology, 3 (2). pp. 373-377. ISSN 2395 - 1990

Mudhangulla, Sridhar Babu (2017) Study of Stick-Slip in a Torsional Drill bit Using Neutral Delay Differential Equations. Masters thesis, Indian Institute of Technology Hyderabad.

Murugesan, Meenatchidevi and Balusamy, Saravanan and Hochgreb, Simone and Li, Larry K B (2017) Recurrence analysis of forced synchronization in a self-excited thermoacoustic system. In: International Congress on Sound and Vibration, 23-27, July 2017, London.

N

N, Rajesh and K, Venkatasubbaiah (2017) Two-phase analysis on the conjugate heat transfer performance of microchannel with Cu, Al, SWCNT and hybrid nanofluids. Journal of Thermal Science and Engineering Applications, 9 (4). 041011-041021. ISSN 1948-5085

Nimmagadda, Rajesh (2017) Experimental and numerical study on the heat transfer performance of nanofluids in micro-channel and mini-enclosure. PhD thesis, Indian Institute of Technology Hyderabad.

P

Pal, Bijoy (2017) Mechanical properties of the idealized inverse opal lattice. Masters thesis, Indian Institute of Technology Hyderabad.

Panaskar, N J and Sharma, A (2017) Combined Cold Expansion and Friction Stir Processing of Fastener Holes in Aluminum Alloy Al-2014-T6. Transactions of the Indian Institute of Metals, 70 (1). pp. 107-114. ISSN 0972-2815

Patil, P and Khaderi, Syed Nizamuddin and M, Ramji (2017) Numerical estimation of strain intensity factors at the tip of a rigid line inclusion embedded in a finite matrix. Engineering Fracture Mechanics, 172. pp. 215-230. ISSN 0013-7944

Patil, P and Vyasarayani, C P and M, Ramji (2017) Linear least squares approach for evaluating crack tip fracture parameters using isochromatic and isoclinic data from digital photoelasticity. Optics and Lasers in Engineering, 93. pp. 182-194. ISSN 0143-8166

Premlata, A R and Tripathi, M K and Karri, Badarinath and Sahu, Kirti Chandra (2017) Numerical and experimental investigations of an air bubble rising in a Carreau-Yasuda shear-thinning liquid. Physics of Fluids, 29 (3). ISSN 1070-6631

Q

Quah, Edmund Wenjie and Karri, Badarinath and Ohl, Siew-Wan and Klaseboer, Evert and Khoo, Boo Cheong (2017) Expansion and collapse of an initially off-centered bubble within a narrow gap and the effect of a free surface. International Journal of Multiphase Flow. ISSN 0301-9322 (In Press)

R

Reddy, N H and Saxena, P (2017) Limit points in the free inflation of a magnetoelastic toroidal membrane. International Journal of Non-Linear Mechanics, 95. pp. 248-263. ISSN 0020-7462

Reddy, Rajesh and Banerjee, Raja (2017) Direct Simulations of Liquid Sheet Breakup in Planar Gas Blast Atomization. Atomization and Sprays, 27 (2). pp. 95-116. ISSN 1044-5110

S

S, Bibin and Pandey, Ashok Kumar (2017) A Hybrid Approach to Model the Temperature Effect in Tire Forces and Moments. SAE International Journal of Passenger Cars - Mechanical Systems, 10 (1). pp. 25-37. ISSN 1946-4002

S, Chetan (2017) Numerical modelling of fluid-structure interaction using fictitious domain method: application towards compressible fluid flow. Masters thesis, Indian Insitute of Technology Hyderabad.

Sahu, Kirti Chandra and Agrawal, Meenu and A R, Premlata and Tripathi, Manoj and Karri, Badarinath (2017) Nonspherical liquid droplet falling in air. In: 70th Annual Meeting of the APS Division of Fluid Dynamics, November 19–21, 2017, Denver, Colorado.

Sharma, A and Bandari, V and Ito, K and Kohama, K and M, Ramji and Himasekhar, H S (2017) A new process for design and manufacture of tailor-made functionally graded composites through friction stir additive manufacturing. Journal of Manufacturing Processes, 26. pp. 122-130. ISSN 1526-6125

Somashekara, M A and Naveenkumar, M and Kumar, A and Chinthapenta, Viswanath and S, Suryakumar (2017) Investigations into effect of weld-deposition pattern on residual stress evolution for metallic additive manufacturing. International Journal of Advanced Manufacturing Technology, 90 (5-8). pp. 2009-2025. ISSN 0268-3768

Somashekara, M A and Simhambhatla, S (2017) Studies on Dissimilar Twin-Wire Weld-Deposition for Additive Manufacturing Applications. Transactions of the Indian Institute of Metals, 70 (8). pp. 2123-2135. ISSN 0972-2815

Surya, S and Vyasarayani, C P and Kalmár-Nagy, T (2017) Homotopy continuation for characteristic roots of delay differential equations using the Lambert W function. Journal of Vibration and Control. p. 107754631771762. ISSN 1077-5463 (In Press)

T

Tripathy, Swaraj Kumar (2017) Stress Concentration/Intensity Factor Determination Using Thermo-Elastic Stress Analysis (TSA). Masters thesis, Indian Institute of Technology Hyderabad.

U

Umashankar, Hariharan and Kalpathy, Sreeram and Dixit, Harish Nagaraj (2017) Stability of thin liquid films containing surface active particles. In: 70th Annual Meeting of the APS Division of Fluid Dynamics, November 19–21, 2017, Denver, Colorado.

V

V, Janardhan and R, Prasanth Kumar (2017) Generating Feasible Solutions for Dynamically Crossing a Wide Ditch by a Biped Robot. Journal of Intelligent & Robotic Systems, 88 (1). pp. 37-56. ISSN 0921-0296

V, Nidheesh (2017) Effect of Joint Distortions on Breakout Noise from a Flexible Rectangular Duct. Masters thesis, Indian Institute of Technology Hyderabad.

Vemula, Sai Theja (2017) A simple model to estimate the velocity of sand during explosion in sand. Masters thesis, Indian Institute of Technology Hyderabad.

Vivek, Atul S (2017) On the Stability of Thin Films. Masters thesis, Indian Institute of Technology Hyderabad.

Y

Yang, L and Gong, Z and Lin, Y and Chinthapenta, Viswanath and Li, Q and Webster, T J and Sheldon, B W (2017) Disordered Topography Mediates Filopodial Extension and Morphology of Cells on Stiff Materials. Advanced Functional Materials. p. 1702689. ISSN 1616-301X (In Press)

This list was generated on Sat Nov 25 16:54:20 2017 IST.