Items where Division is "Department of Mechanical & Aerospace Engineering" and Year is 2016

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | D | G | H | I | J | K | N | P | R | S
Number of items: 35.


Adinarayanappa, S M and M, Naveenkumar and Kumar, A and Chinthapenta, Viswanath (2016) Thermo-Mechanical Modelling of Arc Welding. In: Globalization in Joining Technology and Material Science, JWRI Osaka University, Japan.

Adinath, Kangude Prasad (2016) Development of Thermodynamic Model for Conventional SI Engine Simulation and Detailed Testing Analysis of a Lean Combustion in PFI SI Engine. Masters thesis, Indian Institute of Technology Hyderabad.

Ahsan, Zaid and Uchida, T K and Vyasarayani, C P (2016) Adaptive sparse Galerkin methods for vibrating continuous structures. Transactions of the Canadian Society for Mechanical Engineering, 40 (1). pp. 19-29. ISSN 0315-8977

Amogh, R N and Mahanta, T K and B, Venkatesham (2016) Structural-acoustic coupling of circular membrane backed by cylinder cavity using mode coupling approach. In: 2nd Australasian Acoustical Societies Conference, ACOUSTICS, 9-11, November 2016, Brisbane; Australia.

Ansari, S and Date, M and Simhambhatla, S and Rath, S N (2016) A Review of Hydrogels in Droplet-based Bio-Fabrication Techniques. In: 2nd International Conference on Digital Fabrication (ICDF 2016), 3-5 Mar, 2016, Tokyo, Japan.

Anwar, Sadath and Dixit, Harish Nagaraj and Vyasarayani, Chandrika Prakash (2016) Dynamics of Cross-Flow Heat Exchanger Tubes With Multiple Loose Supports. Journal of Pressure Vessel Technology, 138 (5). 051303-1. ISSN 0094-9930


Banerjee, N and Sharma, A (2016) Development of a friction model and its application in finite element analysis of minimum quantity lubrication machining of Ti-6Al-4 V. Journal of Materials Processing Technology, 238. pp. 181-194. ISSN 0924-0136


Dixit, R and R, Prasanth Kumar (2016) Working and Limitations of Cable Stiffening in Flexible Link Manipulators. Advances in Acoustics and Vibration, 2016. pp. 1-9. ISSN 1687-6261


G, Vamsi Krishna (2016) Dynamic behavior of structures with bolted joints. Masters thesis, Indian Institute of Technology Hyderabad.

Gijare, H and Assam, A and Dongari, Nishanth (2016) Aero-Thermodynamics Optimization of Re-Entry Capsule in the Slip Flow Regime. In: Proceedings of the 23rd National Heat and Mass Transfer Conference and 1st International ISHMT-ASTFE Heat and Mass Transfer Conference IHMTC, 17-20 December, 2015, Thiruvananthapuram, India.

Gopalan, K S and Eswaran, Vinayak (2016) Numerical investigation of thermal performance of PCM based heat sink using structured porous media as thermal conductivity enhancers. International Journal of Thermal Sciences, 104. pp. 266-280. ISSN 1290-0729


Holay, Sarang Abhay (2016) Developing a 3D incompressible vof based multiphase solver using OpenFOAM libraries. Masters thesis, Indian Institute of Technology Hyderabad.


Imam, M and Racherla, V and Biswas, K and Fujii, H and Chinthapenta, Viswanath and Sun, Yufeng and Morisada, Yoshiaki (2016) Microstructure-property relation and evolution in friction stir welding of naturally aged 6063 aluminium alloy. The International Journal of Advanced Manufacturing Technology. ISSN 0268-3768 (In Press)


Ji, J and Bi, Y B and K, Venkatasubbaiah and Li, K Y (2016) Influence of aspect ratio of tunnel on smoke temperature distribution under ceiling in near field of fire source. Applied Thermal Engineering, 106. pp. 1094-1102. ISSN 1359-4311

Jose, M J and Kumar, S S and Sharma, A (2016) Vibration assisted welding processes and their influence on quality of welds. Science and Technology of Welding and Joining, 21 (4). pp. 243-258. ISSN 1362-1718


K, Nageswararao and Karri, Badarinath (2016) Fish hook in classifier efficiency curves: An update. Separation and Purification Technology, 158. pp. 31-38. ISSN 1383-5866

K P, Karunakaran and Simhambhatla, S and U, Chandrasekhar and A, Bernard (2016) Hybrid rapid manufacturing of metallic objects. International Journal of Rapid Manufacturing, 1 (4). p. 2016. ISSN 1757-8817

Kambali, P N and Pandey, A K (2016) Nonlinear coupling of transverse modes of a fixed–fixed microbeam under direct and parametric excitation. Nonlinear Dynamics, 87 (2). pp. 1271-1294. ISSN 0924-090X

Karandikar, Aniket (2016) Numerical Analysis of Melting and Melt Flow Behaviour in Extrusion Deposition Process. Masters thesis, Indian Institute of Technology Hyderabad.

Khan, Imran (2016) Modelling of temperature profiles for the plunge stage of friction stir welding process. Masters thesis, Indian Institute of Technology Hyderabad.


N, Satish and K, Venkatasubbaiah and R, Harish and Sengupta, T K and Lele, S K and Sreenivasan, K R and Davidson, P A (2016) Effect of Buoyancy on Turbulent Mixed Convection Flow Through Vertical and Horizontal Channels. In: IUTAM Symposium on Advances in Computation, Modeling and Control of Transitional and Turbulent Flows, Dec 15-18, 2014, Goa, India.

Nimmagadda, R and K, Venkatasubbaiah (2016) Numerical investigation on conjugate heat transfer performance of micro-channel using sphericity based gold and carbon nanoparticles. Heat Transfer Engineering. ISSN 0145-7632 (In Press)

Nimmagadda, R and Venkatasubbaiah, K (2016) Multiphase Approach on Heat Transfer Performance of Micro-channel using Hybrid Carbon Nanofluid. In: 13TH ASME International Conference on Nanochannels, Microchannels, and Minichannels, JUL 06-09, 2015, San Francisco, CA.


P, Mastanaiah and Sharma, A and Reddy, G M (2016) Dissimilar Friction Stir Welds in AA2219-AA5083 Aluminium Alloys: Effect of Process Parameters on Material Inter-Mixing, Defect Formation, and Mechanical Properties. Transactions of the Indian Institute of Metals, 69 (7). pp. 1397-1415. ISSN 0972-2815

Panchagnula, J S and Simhambhatla, S (2016) Additive Manufacturing of Complex Shapes Through Weld-Deposition and Feature Based Slicing. In: ASME International Mechanical Engineering Congress and Exposition (IMECE2015), Nov 13-19, 2015, Houston, TX.

Panchagnula, J S and Simhambhatla, S (2016) Feature based Weld-Deposition for Additive Manufacturing of Complex Shapes. Journal of The Institution of Engineers (India): Series C. pp. 1-8. ISSN 2250-0545 (In Press)


R, Harish and K, Venkatasubbaiah (2016) Non-Boussinesq approach for turbulent buoyant flows in enclosure with horizontal vent and forced inlet port. Applied Mathematical Modelling, 40 (2). pp. 927-941. ISSN 0307-904X

R, Lingam and O, Prakash and Belk, J H and Reddy, N V (2016) Automatic feature recognition and tool path strategies for enhancing accuracy in double sided incremental forming. International Journal of Advanced Manufacturing Technology. pp. 1-17. ISSN 0268-3768

Raviprolu, Praveena and Jade, Nagaraja and B, Venkatesham (2016) Sound Radiation Characteristics of a Rectangular Duct with Flexible Walls. Advances in Acoustics and Vibration, 2016. pp. 1-15. ISSN 1687-6261 (In Press)


Sharma, A (2016) A comparative study on mechanical properties of single- and twin-wire welded joints through multi-objective meta-heuristic optimisation. International Journal of Manufacturing Research, 11 (4). pp. 374-393. ISSN 1750-0591

Sharma, A and Verma, D K and Arora, N (2016) A scheme of comprehensive assessment of weld bead geometry. International Journal of Advanced Manufacturing Technology, 82 (9). pp. 1507-1515. ISSN 0268-3768

Singh, S G and Veerla, S and Sharma, V and Pandey, A K and Pal, P (2016) Precise identification of < 1 0 0 > directions on Si{001} wafer using a novel self-aligning pre-etched technique. Journal of Micromechanics and Microengineering, 26 (2). ISSN 0960-1317

Singh, S S and Pal, P and Pandey, A K (2016) Mass Sensitivity of Nonuniform Microcantilever Beams. Journal of Vibration and Acoustics, 138 (6). ISSN 1048-9002

Singh, S S and Pal, P and Pandey, A K and Xing, Y and Sato, K (2016) Determination of precise crystallographic directions for mask alignment in wet bulk micromachining for MEMS. Micro and Nano Systems Letters, 4 (5). pp. 1-29. ISSN 2213-9621

Singh, S S and Veerla, S and Sharma, V and Pandey, A K and Pal, P (2016) Precise identification of <1 0 0> directions on Si{0 0 1} wafer using a novel self-aligning pre-etched technique. Journal of Micromechanics and Microengineering, 26 (2). ISSN 0960-1317

This list was generated on Sun Sep 24 21:08:53 2017 IST.