# Items where Division is "Department of Mechanical & Aerospace Engineering" and Year is 2013

Up a level |

**40**.

## A

Asgar, J and Lingam, R and Reddy, V N
(2013)
*Tool path influence on electric pulse aided deformation during incremental sheet metal forming.*
In: The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, 6–10 January 2014, Melbourne, Australia.

## B

B, Venkatesham
(2013)
*Acoustic-Structural Coupled Analysis of a Flexible Rectangular Duct.*
In: 20th International Congress on Sound and Vibration 2013, ICSV 2013, 7-11 July 2013, Bangkok; Thailand.

Baghel, A K
(2013)
*Cfd Study of Sloshing in Rectunglar Tank.*
Masters thesis, Indian Institute of Technology Hyderabad.

Banerjee, Raja
(2013)
*Numerical investigation of evaporation of a single ethanol/iso-octane droplet.*
Fuel, 107.
pp. 724-739.
ISSN 0016-2361

Bhise, V S
(2013)
*Application of DIC in Solid Mechanics.*
Masters thesis, Indian Institute of Technology Hyderabad.

## D

Dixit, Harish Nagaraj and Homsy, G M
(2013)
*The elastocapillary Landau-Levich problem.*
Journal of Fluid Mechanics, 735.
pp. 1-28.
ISSN 0022-1120

Duryodhan, V S and Singh, Shiv Govind and Agrawal, A
(2013)
*Liquid flow through a diverging microchannel.*
Microfluidics and Nanofluidics, 14 (1-2).
pp. 53-67.
ISSN 1613-4982

## G

Gyanadutta, S
(2013)
*Linear and Nonlinear Analysis of DC Biased Coupled Microbeams.*
Masters thesis, Indian Institute of Technology Hyderabad.

## H

Harish, R and Venkatasubbaiah, K
(2013)
*Mathematical modeling and computation of fire induced turbulent flow in partial enclosures.*
Applied Mathematical Modelling, 37 (23).
pp. 9732-9746.
ISSN 0307-904X

Harish, R and Venkatasubbaiah, K
(2013)
*Transport phenomena of turbulent fire spread through compartment connected to vertical shaft in tall building.*
Fire Safety Journal, 61.
pp. 160-174.
ISSN 0379-7112

## J

Jadon, V
(2013)
*Numerical & Experimental Study of Sloshing of Liquid in a Rectangular Tank.*
Masters thesis, Indian Institute of Technology Hyderabad.

## K

K, Patel Rakeshkumar
(2013)
*Numerical Simulation of Orion CEV Re-Entry Vehicle.*
Masters thesis, Indian Institute of Technology Hyderabad.

K, Santhosh Kumar
(2013)
*CFD Analysis of Fuel Spray Characteristics Inside
a GDI Engine.*
Masters thesis, Indian Institute of Technology Hyderabad.

K, Venkatasubbaiah and Abhishek, Anand
(2013)
*Numerical Simulation of Mixed Convection Flow Over Heat Source Modules Mounted On A Horizontal Plate.*
Computational Thermal Sciences, 5 (1).
pp. 27-41.
ISSN 1940-2503

Kashfuddoja, M and M, Ramji
(2013)
*Whole-field strain analysis and damage assessment of adhesively bonded patch repair of CFRP laminates using 3D-DIC and FEA.*
Composites Part B: Engineering, 53.
pp. 46-61.
ISSN 1359-8368

Kumar, Pankaj
(2013)
*Parametric Study of Finite Volume Solver for Dilute Gas-Droplet Flows with Evaporation.*
Masters thesis, Indian Institute of Technology Hyderabad.

Kumar, P and Eswaran, Vinayak
(2013)
*The effect of radiation on natural convection in slanted cavities of angle γ = 45° and 60°.*
International Journal of Thermal Sciences, 67.
pp. 96-106.
ISSN 1290-0729

## M

M, Ramji and R, Srilakshmi and M, Bhanu Prakash
(2013)
*Towards optimization of patch shape on the performance of bonded composite repair using FEM.*
Composites Part B: Engineering, 45 (1).
pp. 710-720.
ISSN 1359-8368

Motali, B K
(2013)
*Rotating Tool Cold Expansion.*
Masters thesis, Indian Institute of Technology Hyderabad.

## O

O, Abdullah and S, Eren Semercigil and R, Prasanth Kumar and Y, Pulas
(2013)
*Delaying tool chatter in turning with a two-link robotic arm.*
Journal of Sound and Vibration, 332 (6).
pp. 1405-1417.
ISSN 0022-460X

## P

P, Jabir Ubaid
(2013)
*Damage Prediction in Fiber Reinforced Composites.*
Masters thesis, Indian Institute of Technology Hyderabad.

P, Nithish Reddy
(2013)
*Numerical Investigations on Development of Scramjet Propulsion System.*
Masters thesis, Indian Institute of Technology Hyderabad.

P, Murali Krishna and R, Prasanth Kumar and S, Srivastava
(2013)
*Dynamic Gaits and Control in Flexible Body Quadruped Robot.*
In: 1st International and 16th National Conference on Machines and Mechanisms (iNaCoMM2013), 18-20 December, 2013, IIT Roorkee, India.

P, Murali Krishna and R, Prasanth Kumar and S, Srivastava
(2013)
*Level Trot Gait in Quadruped Robots.*
In: International Conference on Advances in Robotics, 04-06 July, 2013, Pune.

Panaskar, N J
(2013)
*A Noval Concept of Combined Cold Expansion and Surface Processing of Fastener Holes Using Rotating Tool.*
Masters thesis, Indian Institute of Technology Hyderabad.

Panaskar, N J and Sharma, Abhay
(2013)
*On feasibility of friction stir processing of cylindrical hole.*
In: 1st International Joint Symposium on Joining and Welding, 06-08 Nov, 2013, Osaka, Japan.

Pandey, A K
(2013)
*Effect of coupled modes on pull-in voltage and frequency tuning of a NEMS device.*
Journal of Micromechanics and Microengineering, 23 (8).
ISSN 0960-1317

## R

R, Harish and K, Venkatasubbaiah
(2013)
*Numerical simulation of turbulent plume spread in ceiling vented enclosure.*
European Journal of Mechanics, B/Fluids, 42.
pp. 142-158.
ISSN 0997-7546

Rangarajan, A M and Banerjee, Raja
(2013)
*Numerical Investigation of In-Cylinder Fuel Atomization and Mixing For a GDI Engine.*
In: Proceeding of the 22nd National and 11th International ISHMT-ASME Heat and Mass Transfer Conference, December, 2013, IIT, Kharagpur.

Raviprolu, P
(2013)
*Sound Radiation Characteristics of Rectangular Duct.*
Masters thesis, Indian Institute of Technology Hyderabad.

Reddy, S R and Sebastian, J and Miyyadad, S M and Banerjee, Raja and Sivadasan, N
(2013)
*Single and Two Phase Flow CFD Solvers Using GPU.*
In: National Conference on Parallel Computing Technologies, 21-23, February 2013, Bangalore; India.

Robi, Mathews
(2013)
*Effect of Area-Filling Path on the Residual Stresses Developed During Weld-Deposition Based Additive Manufacturing.*
Masters thesis, Indian Institute of Technology Hyderabad.

## S

S, Suryakumar and Somashekara, M A
(2013)
*Manufacturing of functionally gradient materials by using weld-deposition.*
In: International Joint Symposium on Joining and Welding, 06-08 Nov, 2013, Osaka, Japan.

Shaikh, M
(2013)
*Large Eddy Simulation of Turbulent Incompressible Flow Using GPU with Multigrid Algorithm.*
Masters thesis, Indian Institute of Technology Hyderabad.

Simhambhatla, S and Karunakaran, K P and Chandrasekhar, U and Somashekara, M A
(2013)
*A Study of the Mechanical Properties of Objects Built through Weld-Deposition.*
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.
pp. 1-10.
ISSN 0954-4054

Suryakumar, S and Somashekara, M A
(2013)
*Manufacture of Functionally Gradient Materials Using Weld-Deposition.*
In: 24th International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, SFF 2013, 12-13, August 2013, Austin, TX; United States.

## V

Vishwakarma, S D and Pratap, R and Pandey, A K and Parpia, J M and Southworth, D R and Barton, R A and Craighead, H G
(2013)
*Estimation of Acoustic Losses in the Quality Factor of a Micromechanical 2D Resonator.*
In: 20th International Congress on Sound and Vibration 2013, ICSV 2013, 7-11 July 2013, Bangkok; Thailand.

Vyasarayani, C P and Gupta, A and McPhee, J
(2013)
*Galerkin approximations for retarded delay differential equations with state-dependent delays.*
Journal of Dynamic Systems, Measurement, and Control, 135 (6).
pp. 1-6.
ISSN 0022-0434

## Y

Yadav, R and Kushari, A and Eswaran, Vinayak and Verma, A K
(2013)
*A numerical investigation of the Eulerian PDF transport approach for modeling of turbulent non-premixed pilot stabilized flames.*
Combustion and Flame, 160 (3).
pp. 618-634.
ISSN 0010-2180

Yadav, R and Kushari, A and Verma, A K and Eswaran, Vinayak
(2013)
*Weighted sum of gray gas modeling for nongray radiation in combusting environment using the hybrid solution methodology.*
Numerical Heat Transfer, Part B Fundamentals, 64 (2).
pp. 174-197.
ISSN 1040-7790