Items where Division is "Department of Material Science Engineering" and Year is 2019

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Number of items: 63.

Article

Anandkumar, Mariappan and Bhattacharya, Saswata and Deshpande, Atul Suresh (2019) Low temperature synthesis and characterization of single phase multi-component fluorite oxide nanoparticle sols. RSC Advances, 9 (46). pp. 26825-26830. ISSN 2046-2069

Bandi, Suresh and Hastak, Vikram and Pavithra, Chokkakula L P and et al, . (2019) Graphene/chitosan-functionalized iron oxide nanoparticles for biomedical applications. Journal of Materials Research. pp. 1-11. ISSN 0884-2914

Basak, Shibabrata and Ganapathy, Swapna and Malladi, Sairam K and et al, . (2019) Designing Reliable Operando TEM Experiments to Study (De)lithiation Mechanism of Battery Electrodes. Journal of The Electrochemical Society, 166 (14). A3384-A3386. ISSN 0013-4651

Bhattacharjee, Pinaki Prasad and Reddy, S R and Saha, R and et al, . (2019) Texture homogeneity and stability in severely warm-rolled and annealed ultrafine pearlite. Materials Science and Technology, 35 (4). pp. 437-447. ISSN 0267-0836

Chatterjee, Sourav and Bhattacharjee, Pinaki Prasad and Butterfoss, Glenn L and et al, . (2019) Establishment of atropisomerism in 3-indolyl furanoids: a synthetic, experimental and theoretical perspective. RSC Advances, 9 (39). pp. 22384-22388. ISSN 2046-2069

Davis, Deepak and Shah, A Farhaan and Panigrahi, Bharat Bhooshan and Singh, Sheela (2019) Effect of Cr2AlC nanolamella addition on tribological properties of 5W-30 engine oil. Applied Surface Science. ISSN 01694332

Denmark, Daniel J. and Bustos-Perez, Xiomar and Swain, Anand and Phan, Manh-Huong and Mohapatra, Subhra and Mohapatra, Shyam S. (2019) Readiness of Magnetic Nanobiosensors for Point-of-Care Commercialization. Journal of Electronic Materials, 48 (8). pp. 4749-4761. ISSN 0361-5235

Dey, Suhash Ranjan and Mandati, Sreekanth (2019) Two-dimensional CuIn1−xGaxSe2 nano-flakes by pulse electrodeposition for photovoltaic applications. Solar Energy, 181. pp. 396-404. ISSN 0038092X

Dhivya, Egambaram and Magadevan, Deviga and Palguna, Yasam and et al, . (2019) Synthesis of titanium based hetero MOF photocatalyst for reduction of Cr (VI) from wastewater. Journal of Environmental Chemical Engineering, 7 (4). p. 103240. ISSN 22133437

Fan, Zhiyuan and Gupta, Shourya Dutta and Gladstone, Ran and et al, . (2019) Electrically defined topological interface states of graphene surface plasmons based on a gate-tunable quantum Bragg grating. Nanophotonics, 8 (8). pp. 1417-1431. ISSN 2192-8614

Illa, Mani Pujitha and Khandelwal, Mudrika and Sharma, Chandra Shekhar (2019) Modulated Dehydration for Enhanced Anodic Performance of Bacterial Cellulose derived Carbon Nanofibers. ChemistrySelect, 4 (21). pp. 6642-6650. ISSN 2365-6549

Ishtiyak, Mohd and Jana, Subhendu and Bhattacharjee, Pinaki Prasad and Jai, Prakash et. al. (2019) Intrinsic extremely low thermal conductivity in BaIn2Te4: Synthesis, crystal structure, Raman spectroscopy, optical, and thermoelectric properties. Journal of Alloys and Compounds. ISSN 09258388

Kannan, P K and Chaudhari, Sushmita and Dey, Suhash Ranjan (2019) Impact of sulphurization environment on formation of $$\hbox {Cu}_{2}\hbox {ZnSnS}_{4}$$ Cu 2 ZnSnS 4 films using electron beam evaporated stacked metallic precursors. Bulletin of Materials Science, 42 (1). ISSN 0250-4707

Karre, Rajamallu and Kodli, Basanth Kumar and Rajendran, Archana and J, Nivedhitha and Pattanayak, Deepak K and Ameyama, Kei and Dey, Suhash Ranjan (2019) Comparative study on Ti-Nb binary alloys fabricated through spark plasma sintering and conventional P/M routes for biomedical application. Materials Science and Engineering: C, 94. pp. 619-627. ISSN 0928-4931

Kelp, G and Arju, N and Lee, A and Esquivel, E and Delgado, R and Yu, Y and Gupta, S D and Sokolov, K. and Shvets, G. (2019) Application of metasurface-enhanced infra-red spectroscopy to distinguish between normal and cancerous cell types. Analyst, 144 (4). pp. 1115-1127. ISSN 0003-2654

M M, Saj Mohan and Bandyopadhyay, Soumya and Jogi, Tushar and Bhattacharya, Saswata and Ramadurai, Ranjit (2019) Realization of rhombohedral, mixed, and tetragonal like phases of BiFeO3 and ferroelectric domain engineering using a strain tuning layer on LaAlO3(001) substrate. Journal of Applied Physics, 125 (1). ISSN 0021-8979

Mahanta, Urbashi and Khandelwal, Mudrika and Deshpande, Atul Suresh (2019) Wetting Transition from Lotus Leaf to Rose Petal using Modified Fly Ash. ChemistrySelect, 4 (27). pp. 7936-7942. ISSN 2365-6549

Mandati, S and Dey, Suhash Ranjan and Joshi, Shrikant V and Bulusu, V S (2019) Two-dimensional CuIn1− xGaxSe2 nano-flakes by pulse electrodeposition for photovoltaic applications. Journal of Magnetism and Magnetic Materials, 181. pp. 396-404. ISSN 0304-8853

Mandati, Sreekanth and Dey, Suhash Ranjan and Joshi, Shrikant V. and et al, . (2019) Two-dimensional CuIn1−xGaxSe2 nano-flakes by pulse electrodeposition for photovoltaic applications. Solar Energy, 181. pp. 396-404. ISSN 0038092X

Mane, Rahul B. and Ampolu, Haribabu and Panigrahi, Bharat Bhooshan and et al, . (2019) Oxidation kinetics of Ti3GeC2 MAX phase. Corrosion Science, 151. pp. 81-86. ISSN 0010938X

Ndione, Paul F and Ratcliff, Erin L and Dey, Suhash Ranjan et. al. (2019) High-Throughput Experimental Study of Wurtzite Mn1–xZnxO Alloys for Water Splitting Applications. ACS Omega, 4 (4). pp. 7436-7447. ISSN 2470-1343

Pavithra, C L P and Janardhan, R K S K and Ummethala, Govind and M, Chandrasekhar and Malladi, Sairam K and Dey, Suhash Ranjan (2019) An Electrochemical Approach for Development of Novel Magnetic Multicomponent Alloy Thin Films for Sensor Applications. The Electrochemical Society.

Reddy, S R and Sunkari, Upender and Bhattacharjee, Pinaki Prasad (2019) Microstructural design by severe warm-rolling for tuning mechanical properties of AlCoCrFeNi2.1 eutectic high entropy alloy. Intermetallics, 114. p. 106601. ISSN 09669795

Reddy, S R and Sunkari, Upender and Bhattacharjee, Pinaki Prasad and et al, . (2019) Engineering heterogeneous microstructure by severe warm-rolling for enhancing strength-ductility synergy in eutectic high entropy alloys. Materials Science and Engineering: A, 764. p. 138226. ISSN 09215093

Reddy, S R and Sunkari, Upender and Bhattacharjee, Pinaki Prasad and et al, . (2019) Microstructure and texture of a severely warm-rolled and annealed AlCoCrFeNi2.1 eutectic high entropy alloy. Journal of Physics: Conference Series, 1270. 012054. ISSN 1742-6588

Reddy, S. R. and Yoshida, S and Bhattacharjee, Pinaki Prasad (2019) Nanostructuring with Structural-Compositional Dual Heterogeneities Enhances Strength-Ductility Synergy in Eutectic High Entropy Alloy. Scientific Reports, 9 (1). ISSN 2045-2322

Reddy, Santhan and Kumar, Manish and Panchagnula, Jayaprakash Sharma and Parchuri, Pradeep Kumar and S, Suryakumar and Ito, Kazuhiro and Sharma, Abhay (2019) A new approach for attaining uniform properties in build direction in additive manufactured components through coupled thermal-hardness model. Journal of Manufacturing Processes, 40. pp. 46-58. ISSN 1526-6125

Reddy, Seelam Rajasekhar and Sunkari, Upender and Lozinko, Adrianna and Guo, Sheng and Bhattacharjee, Pinaki Prasad (2019) Development and homogeneity of microstructure and texture in a lamellar AlCoCrFeNi2.1 eutectic high-entropy alloy severely strained in the warm-deformation regime. Journal of Materials Research. pp. 1-13. ISSN 0884-2914

Revathi, Janardhanan and Jyothirmayi, Adduru and Rao, Tata Narasinga and Deshpande, Atul Suresh (2019) Wood‐Derived Carbon Fibers Embedded with SnO x Nanoparticles as Anode Material for Lithium‐Ion Batteries. Global Challenges. p. 1900048. ISSN 2056-6646

Rohila, Sahil and Mane, Rahul B and Panigrahi, Bharat Bhooshan and et al, . (2019) Viscous flow assisted sintering of AlCoCrFeNi high entropy alloy powder. Materials Letters, 256. p. 126668. ISSN 0167577X

Rohila, Sahil and Mane, Rahul B and Ummethala, Govind and Panigrahi, Bharat Bhooshan (2019) Nearly full-density pressureless sintering of AlCoCrFeNi-based high-entropy alloy powders. Journal of Materials Research. pp. 1-10. ISSN 0884-2914

Roopavath, Uday Kiran and Sah, Mahesh Kumar and Panigrahi, Bharat Bhooshan and Rath, Subha Narayan (2019) Mechanochemically synthesized phase stable and biocompatible β-tricalcium phosphate from avian eggshell for the development of tissue ingrowth system. Ceramics International. ISSN 0272-8842 (In Press)

Sajmohan, M M and Ranjith, R and Chelvane, J Arout (2019) Effect of non- $$180^{\circ }$$ 180 ∘ polarization invariants on the exchange bias of tetragonal $$\langle 001\rangle $$ ⟨ 001 ⟩ and rhombohedral $$\langle 111\rangle $$ ⟨ 111 ⟩ orientations of bismuth ferrite epitaxial thin films. Bulletin of Materials Science, 42 (5). ISSN 0250-4707

Singh, Vajinder and Kumar, Atul and Mondal, Chandan and Bhattacharjee, Pinaki Prasad and Ghosal, P (2019) Hot deformation of high-Nb-containing γ-TiAl alloy in the temperature range of 1000–1200 °C: microstructural attributes to hot workability. SN Applied Sciences, 1 (4). ISSN 2523-3963

Singh, Vajinder and Mondal, Chandan and Bhattacharjee, Pinaki Prasad and Ghosal, P (2019) Microstructural Characterization by Automated Crystal Orientation and Phase Mapping by Precession Electron Diffraction in TEM: Application to Hot Deformation of a γ-TiAl-based Alloy. Microscopy and Microanalysis. pp. 1-9. ISSN 1431-9276

Singh, Vajinder and Mondal, Chandan and Kumar, Atul and Bhattacharjee, Pinaki Prasad and Ghosal, P (2019) High temperature compressive flow behavior and associated microstructural development in a β-stabilized high Nb-containing γ-TiAl based alloy. Journal of Alloys and Compounds. ISSN 0925-8388 (In Press)

Sugathan, Sandeep and Bhattacharya, Saswata (2019) Phase-Field Modelling of Evolution of Compact Ordered Precipitates in Ternary Alloy Systems. MRS Advances, 4 (25-26). pp. 1457-1463. ISSN 2059-8521

Sunkari, Upender and Reddy, S R and Chatterjee, Subhradeep and Bhattacharjee, Pinaki Prasad (2019) Effect of prolonged aging on phase evolution and mechanical properties of intermetallic strengthened CoCrFeNi2.1Nbx high entropy alloys. Materials Letters, 248. pp. 119-122. ISSN 0167-577X

Vicarelli, Leonardo and Migunov, Vadim and Malladi, Sairam K. and et al, . (2019) Single Electron Precision in the Measurement of Charge Distributions on Electrically Biased Graphene Nanotips Using Electron Holography. Nano Letters, 19 (6). pp. 4091-4096. ISSN 1530-6984

Wilkinson, Angus J and Collins, David M and Zayachuk, Yevhen and Korla, Rajesh and Vilalta-Clemente, Arantxa (2019) Applications of multivariate statistical methods and simulation libraries to analysis of electron backscatter diffraction and transmission Kikuchi diffraction datasets. Ultramicroscopy, 196. pp. 88-98. ISSN 0304-3991

Yadav, Brijesh Singh and Dey, Suhash Ranjan and Dhage, Sanjay R (2019) Effective ink-jet printing of aqueous ink for Cu (In, Ga) Se2 thin film absorber for solar cell application. Solar Energy, 179. pp. 363-370. ISSN 0038-092X

Conference or Workshop Item

Chaudhari, Sushmita and Kannan, P K and Dey, Suhash Ranjan (2019) Effect of Annealing Atmosphere and Stabilizing Agent on the Formation of CZTS Film Using a Simple Dip Coating Technique. In: 32nd European Photovoltaic Solar Energy Conference and Exhibition, 20-24 June 2016, Munich, Germany.

Ganguly, Ronit and Rajesh, Korla and Acharyya, Amit and Ramadurai, Ranjith (2019) Study of Stiffness and flexible sensing performance of poly-vinylidene fluoride (PVDF) a piezo polymer with varying polarization components. In: 2019 IEEE 14th Nanotechnology Materials and Devices Conference, NMDC 2019, 27 October 2019 - 30 October 2019.

Peddiraju, Vivek Chaitanya and Suryakumar, S and Chatterjee, Subhradeep and et al, . (2019) Weld deposition of nickel on titanium for surface hardening with Ti-Ni-based intermetallic compounds. In: International Conference on Materials and Manufacturing Methods (3M ), 5-7 July 2019, Trichy, India. (In Press)

Yadav, Brijesh Singh and Dey, Suhash Ranjan and Dhage, Sanjay R. (2019) Role of selenium content in selenization of inkjet printed CIGSe2 thin film solar cell. In: 3rd International Conference on Optoelectronic and Nano Materials for Advanced Technology, icONMAT, 3-5 January 2019, Kerala, India.

Thesis

Bodapati, Bolla Reddy and Bhattacharjee, Pinaki Prasad (2019) Uniaxial compression and spherical indentation behavior of porous copper. PhD thesis, Indian institute of technology Hyderabad.

Chandrakant, Chandrakant and Panigrahi, Bharat Bhooshan (2019) Electro-Spark Coating of High Entropy Alloys on AISI 410 Stainless Steel Substrates to Improve the Surface Properties and Wear Resistance. Masters thesis, Indian institute of technology Hyderabad.

Dinesh, Dinesh and Dey, Suhash Ranjan (2019) Dip Coating of Cu2ZnSnS4 on Flexible Mo foil and its Flexibility measurements. Masters thesis, Indian institute of technology Hyderabad.

M., Saj Mohan M and Ramadurai, Ranjit (2019) Influence of Strain and Anisotropy on Structure of BiFeO3 Epilayers and their Utilization as Interface Driven Heterostructures for Multiferroic Device Applications. PhD thesis, Indian institute of technology Hyderabad.

Mahata, Bidesh and Ramadurai, Ranjit (2019) Structural and dielectric studies of ferroelectric Nd2Ti2O7 for high temperature pyro sensor application. Masters thesis, Indian institute of technology Hyderabad.

Mane, Rahul B and Panigrahi, Bharat Bhooshan (2019) Sintering Mechanisms of Mechanically Alloyed High Entropy Alloy Powders. PhD thesis, Indian institute of technology Hyderabad.

Miriyala, Kumaraswamy and Ramadurai, Ranjit (2019) Texture and Microstructural Influence on Piezoelectric Properties of Na0.5Bi0.5TiO3 Thin Films: A Lead Free Piezoelectric Material. PhD thesis, Indian institute of technology Hyderabad.

Naidu, Palleda Thaviti and Korla, Rajesh (2019) Effect of Temperature and Strain rate on Flow behavior of Al0.3CoCrFeNi HEA. Masters thesis, Indian institute of technology Hyderabad.

P Lavanya, Devi and Gupta, Shourya Dutta (2019) Tunable plasmonic devices for active control of molecular coupling and optical trapping. Masters thesis, Indian institute of technology Hyderabad.

P V, Anju and Khandelwal, Mudrika (2019) In situ Derived Composites of Recycled Polystyrene and Bacterial cellulose. Masters thesis, Indian institute of technology Hyderabad.

Palai, Debabrata and Khandelwal, Mudrika (2019) Bacterial cellulose membranes for ultrafiltration. Masters thesis, Indian institute of technology Hyderabad.

Prabahar, K and Ramadurai, Ranjit (2019) Growth and Characterization of lead free Multiferroic Ba0.85Ca0.15Zr0.10Ti0.90O3 –CoFe2O4 Nano Composite Thin Films. PhD thesis, Indian institute of technology Hyderabad.

R, Navneeth and Malladi, Sairam K (2019) Corrosion behaviour of Nano-lamellar AlCrCoFeNi2.1 Eutectic High Entropy Alloy. Masters thesis, Indian institute of technology Hyderabad.

S S, Satheesh Kumar and Bhattacharjee, Pinaki Prasad (2019) HOT DEFORMATION BEHAVIOUR OF A POWDER METALLURGY NICKEL BASE SUPERALLOY. PhD thesis, Indian institute of technology Hyderabad.

Sugathan, Sandeep and Bhattacharya, Saswata (2019) A Phase-Field Study of Elastic Stress Effects on Phase Separation in Ternary Alloy Systems. PhD thesis, Indian institute of technology Hyderabad.

Other

Deshpande, Atul Suresh (2019) జీవ ఇంధనాన్నికి కొత్త ఉత్ప్రేరకం. Eenadu, Hyderabad.

Khandelwal, Mudrika and Deshpande, Atul Suresh (2019) IIT Hyderabad developing waterproof material using industrial waste. Economic Times, Hyderabad.

Khandelwal, Mudrika and Deshpande, Atul Suresh (2019) IIT Hyderabad scientists convert fly ash into waterproofing material. Down to Earth, Hyderabad.

This list was generated on Fri Mar 29 19:26:00 2024 IST.