Items where Division is "Department of Material Science Engineering" and Year is 2018

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: B | C | D | E | G | I | J | K | M | N | P | S | W
Number of items: 37.

B

B, Santhosh and Chatterjee, Subhradeep (2018) Recyclability of Mixed Maraging and Stainless Steel Scraps. Masters thesis, Indian Institute of Technology Hyderabad.

Bhattacharjee, T and Wani, I S and Sheikh, S and Clark, I T and Okawa, T and Guo, S and Bhattacharjee, Pinaki Prasad and Tsuji, N (2018) Simultaneous Strength-Ductility Enhancement of a Nano-Lamellar AlCoCrFeNi2.1 Eutectic High Entropy Alloy by Cryo-Rolling and Annealing. Scientific Reports, 8 (1). ISSN 2045-2322

Bodapati, Bolla Reddy and P, Sudharshan Phani and Bhattacharjee, Pinaki Prasad and G, Sundararajan (2018) On the Constraint Factor and Tabor Coefficient Pertinent to Spherical Indentation. Transactions of the Indian Institute of Metals. pp. 1-9. ISSN 0972-2815

Bodapati, Bolla Reddy and P, Sudharshan Phani and Bhattacharjee, Pinaki Prasad and G, Sundararajan (2018) Uniaxial compression behaviour of porous copper: Experiments and modelling. Materials Today Communications, 16. pp. 320-329. ISSN 2352-4928

C

Chaudhari, Sushmita and Dey, Suhash Ranjan (2018) Dip coating of Cu2ZnSn(SxSe1-x)4 Absorber Layer for Solar Photovoltaic Applications. PhD thesis, Indian Institute of Technology Hyderabad.

D

D, Davis and M, Srivastava and M, Malathi and Panigrahi, Bharat Bhooshan and Singh, S (2018) Effect of Cr2AlC MAX phase addition on strengthening of Ni-Mo-Al alloy coating on piston ring: Tribological and twist-fatigue life assessment. Applied Surface Science. ISSN 0169-4332 (In Press)

DESURU, SREEJAGADEESH and Chatterjee, Subhradeep (2018) Surface Alloying of Titanium with Nickel using Customized Automated GMAW process. Masters thesis, Indian Institute of Technology Hyderabad.

Dudala, Srinivas and Korla, Rajesh (2018) Effect of Microstructural Evolution on Flow behavior of Al0.2CoCrFeNi HEA. Masters thesis, Indian Institute of Technology Hyderabad.

E

Eleti, R R and Raju, V and Veerasham, M and Reddy, S R and Bhattacharjee, Pinaki Prasad (2018) Influence of strain on the formation of cold-rolling and grain growth textures of an equiatomic HfZrTiTaNb refractory high entropy alloy. Materials Characterization, 136. pp. 286-292. ISSN 1044-5803

G

Ganguly, Ronit and Bandyopadhyay, Soumya and Miriyala, Kumaraswamy and Gunasekaran, Vijayabhaskar and Bhattacharya, Saswata and Acharyya, Amit and Ramadurai, Ranjit (2018) Tunable polarization components and electric field induced crystallization in polyvinylidenefluoride: A piezo polymer. Polymer Crystallization. e10027. ISSN 2573-7619

I

Illa, Mani Pujitha and Khandelwal, Mudrika and Sharma, Chandra Shekhar (2018) Bacterial cellulose-derived carbon nanofibers as anode for lithium-ion batteries. Emergent Materials. pp. 1-16. ISSN 2522-5731

J

Jung, Minwoo and Gupta, Shourya Dutta and Dabidian, Nima and Brener, Igal and Shcherbakov, Maxim and Shvets, Gennady (2018) Polarimetry Using Graphene-Integrated Anisotropic Metasurfaces. ACS Photonics, 5 (11). pp. 4283-4288. ISSN 2330-4022

K

K, Basanth Kumar and Dey, Suhash Ranjan (2018) Thermomechanical Processing, Microstructure and Texture Studies of TiHy 600 Alloy (a Near Alpha Titanium Alloy). PhD thesis, Indian institute of technology Hyderabad.

K, Rajamallu and Dey, Suhash Ranjan (2018) Design and Development of β Ti Alloys Through First Principles Calculations and Powder Metallurgy Route for Biomedical Applications. PhD thesis, Indian Institute of Technology Hyderabad.

KARRI, SRI NAGA SESHA and Ramadurai, Ranjit and Bhattacharjee, Pinaki Prasad (2018) Pulsed laser deposition of CoCrFeMnNi High Entropy Alloy and its stability. Masters thesis, Indian Institute of Technology Hyderabad.

Kannan, P K and Chaudhari, Sushmita and Dey, Suhash Ranjan (2018) Detailed investigations on influence of precursor stacking and sulfurization for Cu 2 ZnSnS 4 film formation. Thin Solid Films. ISSN 0040-6090 (In Press)

Koundinya, N T B N and E, Nandha Kumar and Chawake, Niraj and Korla, Rajesh and Kottada, Ravi Sankar (2018) A simple and versatile machine for creep testing at low loads (6–300 N) and on miniaturized specimens: Application to a Mg-base alloy. Review of Scientific Instruments, 89 (10). pp. 1-10. ISSN 0034-6748

Kumar, Harendra and Dey, Suhash Ranjan (2018) Effects of Ball Milling on β(Beta) Titanium Alloys for Biomedical Applications. Masters thesis, Indian Institute of Technology Hyderabad.

M

M V, Sreenath and Ramadurai, Ranjit (2018) Tip Induced Surface Defect migration and Conductivity Studies in Rhombohedral epitaxial BiFeO3 Thin Films. Masters thesis, Indian Institute of Technology Hyderabad.

M., Saj Mohan M and Ramadurai, Ranjit (2018) Template assisted strain tuning and phase stabilization in epitaxial BiFeO3 thin films. In: AIP Conference Proceedings 1942.

Mandati, Sreekanth and Dey, Suhash Ranjan and Joshi, Shrikant V and Bulusu, Sarada V (2018) Cu(In,Ga)Se2 Films with Branched Nanorod Architectures Fabricated by Economic and Environmentally Friendly Pulse-Reverse Electrodeposition Route. ACS Sustainable Chemistry & Engineering, 6 (11). pp. 13787-13796. ISSN 2168-0485

Mane, Rahul B and Haribabu, Ampolu and Panigrahi, Bharat Bhooshan (2018) Synthesis and sintering of Ti3GeC2 MAX phase powders. Ceramics International, 44 (1). pp. 890-893. ISSN 02728842

Mane, Rahul B and Panigrahi, Bharat Bhooshan (2018) Comparative study on sintering kinetics of as-milled and annealed CoCrFeNi high entropy alloy powders. Materials Chemistry and Physics, 210. pp. 49-56. ISSN 0254-0584

Mane, Rahul B and Panigrahi, Bharat Bhooshan (2018) Effect of alloying order on non-isothermal sintering kinetics of mechanically alloyed high entropy alloy powders. Materials Letters, 217. pp. 131-134. ISSN 0167-577X

Mane, Rahul B and Panigrahi, Bharat Bhooshan (2018) Sintering mechanisms of mechanically alloyed CoCrFeNi high-entropy alloy powders. Journal of Materials Research. pp. 1-9. ISSN 0884-2914 (In Press)

Mane, Rahul B and Y, Rajkumar and Panigrahi, Bharat Bhooshan (2018) Sintering mechanism of CoCrFeMnNi high-entropy alloy powders. Powder Metallurgy, 61 (2). pp. 131-138. ISSN 0032-5899

Meshram, Manish P and Tamboli, Rameez Rajmahammad and Kodli, Basanth Kumar and Yebaji, Sushil Gyanoba and Dey, Suhash Ranjan (2018) Texture analyses of friction stir welded austenitic stainless steel AISI-316L. Advances in Materials and Processing Technologies, 4 (2). pp. 244-254. ISSN 2374-068X

Miriyala, Kumaraswamy and Ramadurai, Ranjit (2018) Microstructural influence on ferroelectric domain pattern and piezoelectric properties of Na 0.5 Bi 0.5 TiO 3 thin films. Ceramics International, 44 (12). pp. 14556-14562. ISSN 0272-8842

N

N, Ramu and K, Meera and Ramadurai, Ranjit and Rajaram, Muralidharan (2018) The Role of B-site Substitution on the Structural and Dielectric Properties of Samarium Orthoferrite Polycrystals. Materials Research Express. ISSN 2053-1591

P

Patel, A and Wani, I and Reddy, S R and Narayanaswamy, S and Lozinko, A and Saha, R and Guo, S and Bhattacharjee, Pinaki Prasad (2018) Strain-path controlled microstructure, texture and hardness evolution in cryo-deformed AlCoCrFeNi 2.1 eutectic high entropy alloy. Intermetallics, 97. pp. 12-21. ISSN 0966-9795

Patel, Amit and Bhattacharjee, Pinaki Prasad (2018) Strain-path controlled microstructure, texture and hardness evolution in cryo-deformed AlCoCrFeNi2.1 eutectic high entropy alloy. Masters thesis, Indian Institute of Technology Hyderabad.

Prabahar, K and Ramadurai, Ranjit and Saravanan, P and Srinivas, A (2018) Effect of Magnetic Field Annealing on the Magnetostriction and Deflection Properties of CoFe2O4 Thin Films Grown by PLD. Journal of Magnetism and Magnetic Materials. ISSN 0304-8853 (In Press)

S

S M, Rezwanul Islam and Deshpande, Atul Suresh (2018) Synthesis and characterization of PANI/CeO2 composite. Masters thesis, Indian Institute of Technology Hyderabad.

S S, Satheesh Kumar and T, Raghu and Bhattacharjee, Pinaki Prasad and G, Appa Rao and Borah, Utpal (2018) Evolution of microstructure and microtexture during hot deformation in an advanced P/M nickel base superalloy. Materials Characterization, 146. pp. 217-236. ISSN 1044-5803

Saini, Rahul Kumar and Bhattacharya, Saswata (2018) A Phase Field Study of Spinodal Decomposition in Systems with Variable Mobility. Masters thesis, Indian Institute of Technology Hyderabad.

Saj Mohan, M M and M V, S and Ramadurai, Ranjit (2018) Tip Induced Surface Defect migration and Conductivity Studies in Tetragonal, Rhombohedral and Mixed-Phase epitaxial BiFeO3 Thin Films. MRS Advances. pp. 1-6. ISSN 2059-8521

W

Wani, I S and Bhattacharjee, Pinaki Prasad (2018) PROCESSING, STRUCTURE AND MECHANICAL BEHAVIOR OF DUAL PHASE AND NANO-LAMELLAR EUTECTIC HIGH ENTROPY ALLOYS. PhD thesis, Indian Institute of Technology, Hyderabad.

This list was generated on Tue Jul 16 07:43:50 2019 IST.