Items where Division is "Department of Material Science Engineering" and Year is 2016

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Number of items: 39.

Article

Ahmed, M Z and Bhattacharjee, Pinaki Prasad (2016) Microstructure, Texture, and Tensile Properties of a Severely Warm-Rolled and Annealed Duplex Stainless Steel. Steel Research International, 87 (4). pp. 472-483. ISSN 1611-3683

B, Mallesham and B, Viswanath and Ramadurai, Ranjit (2016) Effect of crystal structure and cationic order on phonon modes across ferroelectric phase transformation in Pb(Fe0.5-xScxNb0.5)O3 bulk ceramics. AIP Advances, 6 (1). pp. 1-8. ISSN 2158-3226

Bandyopadhyay, Soumya and Jogi, Tushar and Miriyala, Kumaraswamy and Ramadurai, Ranjit and Bhattacharya, Saswata (2016) A phase-field study of domain dynamics in ferroelectric BCT-BZT system. MRS Advances, 1 (40). pp. 2783-2788. ISSN 2059-8521

Bhattacharya, Saswata and Bandyopadhyay, S and Choudhury, A (2016) Phase-field modeling of electrochemical phenomena. Journal of the Indian Institute of Science, 96 (3). pp. 257-268. ISSN 0970-4140

Chatterjee, Subhradeep and Abinandanan, T A and Reddy, G M and Chattopadhyay, K (2016) Microstructure Formation in Dissimilar Metal Welds: Electron Beam Welding of Ti/Ni. Metallurgical and Materials Transactions A, 47 (2). pp. 769-776. ISSN 1073-5623

Chaudhari, S and Kannan, P K and Dey, Suhash Ranjan (2016) Investigation of optimum annealing parameters for formation of dip coated Cu2ZnSnS4 thin film. Thin Solid Films, 612. pp. 456-462. ISSN 0040-6090

Chaudhari, S and Palli, S and Kannan, P K and Dey, Suhash Ranjan (2016) Pulsed electrodeposition of Cu2ZnSnS4 absorber layer precursor for photovoltaic application. Thin Solid Films, 600. pp. 169-174. ISSN 0040-6090

Hong, L and Liang, L and Bhattacharyya, Saptashwa et. al. (2016) Anisotropic Li intercalation in a LixFePO4 nano-particle: a spectral smoothed boundary phase-field model. Physical Chemistry Chemical Physics, 18 (14). pp. 9537-9543. ISSN 1463-9076

Jogi, T and Bhattacharya, Saswata (2016) Evolution of Interfacial Dislocation Networks in Particle-Strengthened Alloy Systems During High Temperature Creep: A Discrete Dislocation Dynamics Study. Transactions of the Indian Institute of Metals, 69 (2). pp. 507-512. ISSN 0972-2815

Khandelwal, Mudrika and Windle, A H and Hessler, N (2016) In situ tunability of bacteria produced cellulose by additives in the culture media. Journal of Materials Science, 51 (10). pp. 4839-4844. ISSN 0022-2461

Kumar, Basant and Dey, Suhash Ranjan and Saxena, Kuldeep K et. al (2016) Microstructural evolution in hot compressed TiHy 600 titanium alloy. Journal of Metallurgy and Materials Science. ISSN 0974-1267

Maity, Palash Chandra and Khandelwal, Mudrika (2016) Synthesis Time and Temperature Effect on Polyaniline Morphology and Conductivity. American Journal of Materials Synthesis and Processing, 1 (4). pp. 37-42. ISSN 2575-1530

Mallesham, Bandi and Ramadurai, Ranjit (2016) Investigations on Dielectric phase transition behavior of Pb(Fe0.5-xScx)Nb0.5O3 Multiferroic Ceramics. MRS Advances, 1 (9). pp. 585-590. ISSN 2059-8521

Mannepalli, Venkateswara Rao and Ramadurai, Ranjit (2016) Studies on Local Structural Inhomogeneity and Origin of Ferroelectricity in Yttrium chromite Ceramics. MRS Advances, 1 (9). pp. 609-614. ISSN 2059-8521

Miriyala, K and Ramadurai, Ranjit (2016) Tunable ferroelectric domain orientation in polycrystalline and highly oriented Na0.5Bi0.5TiO3 Thin Films. Materials Letters, 178. pp. 23-26. ISSN 0167-577X

Miriyala, Kumaraswamy and Ramadurai, Ranjit (2016) Microstructural influence on piezoresponse and leakage current behavior of Na0.5Bi0.5TiO3 Thin Films. MRS Advances, 1 (37). pp. 2597-2602. ISSN 2059-8521

Palli, S and Dey, Suhash Ranjan (2016) Theoretical and Experimental Study of Copper Electrodeposition in a Modified Hull Cell. International Journal of Electrochemistry, 2016 (348240). pp. 1-13. ISSN 2090-3529

S S, Satheesh Kumar and T, Raghu and Bhattacharjee, Pinaki Prasad and G, Appa Rao and Borah, U (2016) Strain rate dependent microstructural evolution during hot deformation of a hot isostatically processed nickel base superalloy. Journal of Alloys and Compounds, 681 (5). pp. 28-42. ISSN 0925-8388

Sathiaraj, G D and Ahmed, M Z and Bhattacharjee, Pinaki Prasad (2016) Microstructure and texture of heavily cold-rolled and annealed fcc equiatomic medium to high entropy alloys. Journal of Alloys and Compounds, 664. pp. 109-119. ISSN 0925-8388

Sathiaraj, G D and Bhattacharjee, Pinaki Prasad and Tsai, Che-Wei and Yeh, Jien-Wei (2016) Effect of heavy cryo-rolling on the evolution of microstructure and texture during annealing of equiatomic CoCrFeMnNi high entropy alloy. Intermetallics, 69. pp. 1-9. ISSN 0966-9795

Sathiaraj, G D and Tsai, C W and Yeh, J W and Jahazi, M and Bhattacharjee, Pinaki Prasad (2016) The effect of heating rate on microstructure and texture formation during annealing of heavily cold-rolled equiatomic CoCrFeMnNi high entropy alloy. Journal of Alloys and Compounds, 688 (B). pp. 752-761. ISSN 0925-8388

Wani, I S and Bhattacharjee, T and Sheikh, S and Bhattacharjee, Pinaki Prasad and Guo, S and Tsuji, N (2016) Tailoring nanostructures and mechanical properties of AlCoCrFeNi2.1 eutectic high entropy alloy using thermo-mechanical processing. Materials Science and Engineering: A, 675. pp. 99-109. ISSN 0921-5093

Wani, I S and Bhattacharjee, T and Sheikh, S and Lu, Y P and Chatterjee, Subhradeep and Bhattacharjee, Pinaki Prasad and Guo, S and Tsuji, N (2016) Ultrafine-Grained AlCoCrFeNi2.1Eutectic High-Entropy Alloy. Materials Research Letters, 4 (3). pp. 174-179. ISSN 2166-3831

Wani, I S and Sathiaraj, G D and Ahmed, M Z and Reddy, S R and Bhattacharjee, Pinaki Prasad (2016) Evolution of microstructure and texture during thermo-mechanical processing of a two phase Al0.5CoCrFeMnNi high entropy alloy. Materials Characterization, 118. pp. 417-424. ISSN 1044-5803

Y, Rajkumar and Panigrahi, Bharat Bhooshan (2016) Sintering Mechanisms of Ultrafine Cr2AlC MAX Phase Powder. Materials Today Communications, 8. pp. 46-52. ISSN 2352-4928 (In Press)

Conference or Workshop Item

Chaudhari, S and Kannan, P K and Dey, Suhash Ranjan (2016) Effects of triethanolamine on the formation of CZTS films using a simple dip coating technique. In: IEEE 43rdPhotovoltaic Specialists Conference (PVSC), 5-10 June 2016.

Jogi, Tushar and Bhattacharya, Saswata (2016) Evolution of Interfacial Dislocation Networks in Particle-Strengthened Alloy Systems During High Temperature Creep: A Discrete Dislocation Dynamics Study. In: Transactions of the Indian Institute of Metals, 2016.

K., Rajamallu and Niranjan, Manish K and Dey, Suhash Ranjan and et al, . (2016) Fabrication of Biocompatible Ti-Nb-Sn Through Powder Metallurgy Route for Orthopedic Implants. In: 13th World Conference Titanium, 2015, San Diego, USA.

Kesavan, P K Pidugu and Chaudhari, Sushmita and Dey, Suhash Ranjan (2016) Effects of Stacking Sequences in the Formation of CZTS Thin Film Using Electron Beam Evaporation. In: 32nd European Photovoltaic Solar Energy Conference and Exhibition, 20-24 June 2016, Munich, Germany.

Khandelwal, Mudrika and Aggarwal, Kadam (2016) Contextualising Engineering Education to 21st Century - MBA Style Education for Engineering. In: Journal of Engineering Education Transformations, 2016.

Kumar K, Basanth and Karre, Rajamallu and Dey, Suhash Ranjan (2016) Correlation Between Processing Map Domains and Microstructure of 50% Hot Compressed IMI 834 Ti Alloy. In: Proceedings of the 13th World Conference on Titanium, San Diego, USA.

Rajkumar, Y and Aakash, P A and Bhattacharya, Saswata and Panigrahi, Bharat Bhooshan (2016) Mechanically Activated Synthesis of Nanocrystalline Cr2 AiC Powders. In: Transactions of Powder Metallurgy Association of India.

Thesis

Maity, Palash Chandra (2016) Polyaniline: Synthesis and Natural Nanocomposites. Masters thesis, Indian Institute of Technology Hyderabad.

Palli, Srinivas (2016) Theoretical and Experimental Studies of Single Metals (Cu and Ni) and Binary Ni-Cu alloy Electrodeposition in a Modified Hull cell: A Combinatorial Approach. PhD thesis, Indian Institute of Technology Hyderabad.

Parchuri, Pradeep Kumar (2016) A Study of Melt Ratio and Microstructure in Dissimilar Fusion Welds. Masters thesis, Indian Institute of Technology Hyderabad.

R, Manivannan (2016) Gelcasting of High Temperature Radome Materials by Using Inorganic Binders. PhD thesis, Indian Institute of Technology Hyderabad.

Sathiraj, G Dan (2016) Development of Microstructure and Crystalographic texture during thermo-Mechanical Processing of Equiatomic CoCrFeMnNi High Entropy Alloy. PhD thesis, Indian Institute of Technology Hyderabad.

Seelam, Rajasekhar Reddy (2016) Effect of strain path on the evolution of microstructure and texture of equiatomic CoCrFeMnNi high entropy alloy. Masters thesis, Indian Institute of Technology Hyderabad.

Tamboli, Rameez Rajmahammad (2016) Microstructure and Texture Analyses of Similar Welded Industrially Relevant Materials through Friction Stir Welding: D6AC Steel, AISI 316L Steel and Ti-6Al-4V Alloy. Masters thesis, Indian Institute of Technology Hyderabad.

This list was generated on Fri Mar 29 00:08:34 2024 IST.