Items where Division is "Department of Material Science Engineering" and Year is 2015

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | C | E | G | I | J | K | M | P | R | S | U | Y | Z
Number of items: 29.

A

Ahmed, M Z and Bhattacharjee, Pinaki Prasad (2015) Evolution of microstructure and texture during isothermal annealing of a heavily warm-rolled duplex steel. Isij International, 54 (12). pp. 2844-2853. ISSN 0915-1559

Anand, D and Khandelwal, Mudrika (2015) Novel conducting paper from bacterial cellulose and poly aniline. Project Report. Technical volume in 29th Engineering Congress, Hyderabad under the sub-theme “Manufacturing” Technical Session V, Hyderabad.

Anand, D and Khandelwal, Mudrika (2015) Route to conducting nanocomposites by simultaneous in situ polymerization of aniline and matrix assembly from bacterial cellulose nanowhiskers. Project Report. International Conference "Plast India-2015", Gandhinagar.

Anand, Divya (2015) Conducting flexible paper based on Bacterial cellulose and Polyaniline composites. Masters thesis, Indian Institute of Technology Hyderabad.

C

Chen, L and Chen, J and Lebensohn, R A and Yi, Y Z and Heo, T W and Bhattacharjee, S and Chang, K and Mathaudhu, S and Liu, Z K and Chen, L Q (2015) An integrated fast Fourier transform-based phase-field and crystal plasticity approach to model recrystallization of three dimensional polycrystals. Computer Methods in Applied Mechanics and Engineering, 285. pp. 829-848. ISSN 0045-7825

E

Eleti, Rajeshwar Reddy (2015) Hot deformation behavior of CrMnFeCoNi equiatomic FCC High Entropy Alloy. Masters thesis, Indian Institute of Technology Hyderabad.

Equbal, A (2015) Synthesis and Sintering Kinetics of Mechanically Alloyed FeCrCoMnNi High Entropy Alloy Powders. Masters thesis, Indian Institute of Technology Hyderabad.

G

G D, Sathiaraj and Bhattacharjee, Pinaki Prasad (2015) Effect of starting grain size on the evolution of microstructure and texture during thermo-mechanical processing of CoCrFeMnNi high entropy alloy. Journal of Alloys and Compounds, 647. pp. 82-96. ISSN 0925-8388

Gatti, J R and Bhattacharjee, Pinaki Prasad (2015) Effect of Prior Recovery Treatment on the Evolution of Cube Texture During Annealing of Severely Warm-Rolled Al-2.5 wt pctMg Alloy. Metallurgical and Materials Transactions A, 46 (11). pp. 4966-4977. ISSN 1073-5623

Gatti, J R and Bhattacharjee, Pinaki Prasad (2015) Evolution of microstructure and texture during annealing of Al-2.5%Mg-0.2%Sc severely deformed by a combination of accumulative roll bonding (ARB) and conventional rolling. In: 17th International Conference on Textures of Materials, 24-29 August, 2014, Dresden; Germany.

Gatti, Jagg Rao (2015) Understanding and Control of Recrystallization Texture in Severely Deformed Al – 2.5wt.%Mg Alloys. PhD thesis, Indian Institute of Technology Hyderabad.

I

I, Srikanth and Kumar, Suresh and Singh, V and B, Rangababu and Ghosal, P and Ch, Subrahmanyam (2015) Effect of carbon nanofibre addition on the mechanical properties of different Vf carbon-epoxy composites. Bulletin of Materials Science, 38 (2). pp. 309-317. ISSN 0250-4707

J

J R, Gatti and Bhattacharjee, Pinaki Prasad (2015) Nucleation behavior and formation of recrystallization texture in pre-recovery treated heavily cold and warm-rolled Al–2.5 wt.%Mg alloy. Materials Characterization, 106. pp. 141-151. ISSN 1044-5803

K

Kanwal, C and Bhattacharjee, Pinaki Prasad and Mohammad, J (2015) Characterization of Minerals, Metals, and Materials. In: TMS Annual Meeting, January, 2015.

Karre, R and Niranjan, M K and Dey, Suhash Ranjan (2015) First principles theoretical investigations of low Young's modulus beta Ti-Nb and Ti-Nb-Zr alloys compositions for biomedical applications. Materials Science and Engineering: C, 50. pp. 52-58. ISSN 0928-4931

Kodli, B K and Saxena, K K and Dey, Suhash Ranjan and Pancholi, V and Bhattacharjee, A (2015) Texture studies of hot compressed near alpha titanium alloy (IMI 834) at 1000°C with different strain rates. In: 17th International Conference on Textures of Materials, 24-29 August, 2014, Dresden; Germany.

M

Mandati, S (2015) Fabrication of CuInSe2 and Cu(In,Ga)Se2 Absorber Layers by Pulse- and Pulse-reverse Electrochemical Techniques for Solar Photovoltaic Applications. PhD thesis, Indian Institute of Technology Hyderabad.

Mandati, S and Bulusu, V S and Dey, Suhash Ranjan and Joshi, S V (2015) Enhanced photoresponse of Cu(In,Ga)Se2 /CdS heterojunction fabricated using economical non-vacuum methods. Electronic Materials Letters, 11 (4). pp. 618-624. ISSN 2093-6788

Mandati, S and Bulusu, V S and Dey, Suhash Ranjan and Joshi, S V (2015) Photoelectrochemistry of Cu(In,Ga)Se2 thin-films fabricated by sequential pulsed electrodeposition. Journal of Power Sources, 273. pp. 149-157. ISSN 0378-7753

Maurya, A K (2015) Synthesis and Mechanical Studies of Mg-Hydroxyapatite Composite for Bio materials Applications. Masters thesis, Indian Institute of Technology Hyderabad.

P

Palli, S and Hamann, S and Wambach, M and Ludwig, A and Dey, Suhash Ranjan (2015) Fabrication of a Ni-Cu Thin Film Material Library Using Pulsed Electrodeposition. Journal of The Electrochemical Society, 161 (10). D504-D509. ISSN 0013-4651

R

Reddy, N S and Panigrahi, Bharat Bhooshan and Ho, C M and Kim, J H and Lee, C S (2015) Artificial neural network modeling on the relative importance of alloying elements and heat treatment temperature to the stability of α and β phase in titanium alloys. Computational Materials Science, 107. pp. 175-183. ISSN 0927-0256 (In Press)

S

S S, Satheesh Kumar and T, Raghu and Bhattacharjee, Pinaki Prasad and G, Appa Rao and Borah, U (2015) Constitutive modeling for predicting peak stress characteristics during hot deformation of hot isostatically processed nickel-base superalloy. Journal of Materials Science: Materials in Electronics, 50 (19). pp. 6444-6456. ISSN 0022-2461

Sathiaraj, G D and Bhattacharjee, Pinaki Prasad (2015) Analysis of microstructure and microtexture during grain growth in low stacking fault energy equiatomic CoCrFeMnNi high entropy and Ni–60 wt.%Co alloys. Journal of Alloys and Compounds, 637. pp. 267-276. ISSN 0925-8388

Sathiaraj, G D and Bhattacharjee, Pinaki Prasad (2015) Effect of cold-rolling strain on the evolution of annealing texture of equiatomic CoCrFeMnNi high entropy alloy. Materials Characterization, 109. pp. 189-197. ISSN 1044-5803

Sathiaraj, G D and Lee, C and Tsai, C W and Bhattacharjee, Pinaki Prasad (2015) Evolution of microstructure and crystallographic texture in severely cold rolled high entropy equiatomic CoCrFeMnNi alloy during annealing. IOP Conference Series: Materials Science and Engineering, 82. pp. 1-4. ISSN 1757-8981

U

Upadhyaya, M (2015) Fabrication of Epitaxial Thin Films by Pulsed Laser Deposition and Structural Studies of (Ba0.85Ca0.15)(Zr0.10Ti0.90)O3: a Lead Free Piezoelectric. Masters thesis, Indian Institute of Technology Hyderabad.

Y

Yebaji, Sushil Gyanoba (2015) Micro structure-Texture Evolution Studies on IMI 834 Titanium Alloy during High Pressure Torsion. Masters thesis, Indian Institute of Technology Hyderabad.

Z

Zaid, M and Bhattacharjee, Pinaki Prasad (2015) Microtexture of constituent phases in a heavily warm- rolled and annealed duplex stainless steel. In: 17th International Conference on Textures of Materials, 24-29 August, 2014, Dresden; Germany.

This list was generated on Sat Nov 25 03:58:45 2017 IST.