Items where Division is "Department of Material Science Engineering" and Year is 2012

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: B | C | J | K | S | T
Number of items: 9.

B

Bhattacharjee, Pinaki Prasad and Takatsuji, Y and Miyajima, Y and Terada, D and Tsuji, N (2012) Evolution of microstructure and texture during cold rolling and annealing of a highly cube-textured ({001}(100)) polycrystalline nickel sheet. Metallurgical and Materials Transactions A, 43 (7). pp. 2442-2452. ISSN 1073-5623

Bhattacharjee, Pinaki Prasad and Tsuji, N (2012) Effect of ultrahigh straining on the evolution of cube texture ({100}<100>) in high purity nickel. In: International Conference on Textures of Materials, 12-17, December 2011, Mumbai; India.

C

Chaudhary, V P (2012) Effect of Change in Strain Path During Cold Rolling on the Evolution of Microstructure, Texture And Hardness Properties of Nickel With Extremely Coarse Initial Grain Size. Masters thesis, Indian Institute of Technology Hyderabad.

J

Joshi, Mohit (2012) Effect of Strain Path Change during Cold Rolling On the Evolution of Deformation and Recrystallization Textures of High Purity Nickel. Masters thesis, Indian Institute of Technology Hyderabad.

K

K, Rajyalakshmi and M R, Madhav and K, Ramu (2012) Bearing Capacity of Reinforced Strip Foundation Beds on Compressible Clays. Indian Geotechnical Journal, 42 (4). pp. 294-308. ISSN 2277-3347

S

S, Pankaj (2012) Friction Stir Welding (FSW) Studies of Dissimilar Al-Based Alloys Using Different Pin Profiles. Masters thesis, Indian Institute of Technology Hyderabad.

Saha, S (2012) Effect of Change in Strain Path during Cold Rolling on the Evolution of Microstructure, Texture and Hardness Properties of Different Aluminum Alloys. Masters thesis, Indian Institute of Technology Hyderabad.

Sajan, S G (2012) Friction Stir Welding of Aluminum 6082 with Mild Steel and Its Joint Analyses. Masters thesis, Indian Institute of Technology Hyderabad.

T

Tsuji, N and Takatsuji, Y and Miyajima, Y and Bhattacharjee, Pinaki Prasad and Terada, D (2012) Stability of Cube oriented grains during cold-rolling of highly Cube-oriented polycrystalline nickel. Materials Science Forum, 702-3. pp. 402-405. ISSN 0255-5476

This list was generated on Sun Sep 24 21:15:26 2017 IST.