Precise identification of < 1 0 0 > directions on Si{001} wafer using a novel self-aligning pre-etched technique

Singh, S G and Veerla, S and Sharma, Vandana and Pandey, Ashok Kumar and Pal, Prem (2016) Precise identification of < 1 0 0 > directions on Si{001} wafer using a novel self-aligning pre-etched technique. Journal of Micromechanics and Microengineering, 26 (2). ISSN 0960-1317

Full text not available from this repository. (Request a copy)

Abstract

Micromirrors with a tilt angle of 45 degrees are widely used in optical switching and interconnect applications which require 90 degrees out of plane reflection. Silicon wet bulk micromachining based on surfactant added TMAH is usually employed to fabricate 45 degrees slanted walls at the < 1 0 0 > direction on Si{0 0 1} wafers. These slanted walls are used as 45 degrees micromirrors. However, the appearance of a precise 45 degrees {0 1 1} wall is subject to the accurate identification of the < 1 0 0 > direction. In this paper, we present a simple technique based on pre-etched patterns for the identification of < 1 0 0 > directions on the Si{0 0 1} surface. The proposed pre-etched pattern self-aligns itself at the < 1 0 0 > direction while becoming misaligned at other directions. The < 1 0 0 > direction is determined by a simple visual inspection of pre-etched patterns and does not need any kind of measurement. To test the accuracy of the proposed method, we fabricated a 32 mm long rectangular opening with its sides aligned along the < 1 0 0 > direction, which is determined using the proposed technique. Due to the finite etch rate of the {1 1 0} plane, undercutting occurred, which was measured at 12 different locations along the longer edge of the rectangular strip. The mean of these undercutting lengths, measured perpendicular to the mask edge, is found to be 13.41 mu m with a sub-micron standard deviation of 0.38 mu m. This level of uniform undercutting indicates that our method of identifying the < 1 0 0 > direction is precise and accurate. The developed method will be extremely useful in fabricating arrays of 45 degrees micromirrors.

[error in script]
IITH Creators:
IITH CreatorsORCiD
Sharma, VandanaUNSPECIFIED
Pandey, Ashok KumarUNSPECIFIED
Pal, PremUNSPECIFIED
Item Type: Article
Uncontrolled Keywords: pre-etched patterns; crystallographic directions; wet etching
Subjects: Physics > Mechanical and aerospace
Divisions: Department of Mechanical & Aerospace Engineering
Department of Physics
Depositing User: Team Library
Date Deposited: 18 Apr 2016 05:33
Last Modified: 10 Nov 2017 05:51
URI: http://raiith.iith.ac.in/id/eprint/2280
Publisher URL: https://doi.org/10.1088/0960-1317/26/2/025012
OA policy: http://www.sherpa.ac.uk/romeo/issn/0960-1317/
Related URLs:

Actions (login required)

View Item View Item
Statistics for RAIITH ePrint 2280 Statistics for this ePrint Item